#include <hallo.h>
* Waqar Malik [Fri, Oct 21 2005, 02:39:25AM]:
> The error still surfaces while using vpnc_0.3.3+SVN20050909-5_i386.deb
> Error meaasge changed slightly "Error: an inet prefix is expected
> rather than "@"."
Aha. Please send your config file and all the important information that
you omited by not using reportbug (like arch, kernel version).
As temporary fix, set "Target Networks 0.0.0.0/0" into the config.
> Error log attached
> wam:/home/waqar# vpnc --enable-1des --debug 2
> vpnc version 0.3.3
> S1
> S2
> S3
> ++ uname -s
> + OS=Linux
> + DEFAULT_ROUTE_FILE=/var/run/vpnc/defaultroute
> + RESOLV_CONF_BACKUP=/var/run/vpnc/resolv.conf-backup
> ++ which ip
> ++ grep '^/'
> + IPROUTE=/sbin/ip
> + '[' Linux = Linux ']'
> + ifconfig_syntax_ptp=pointopoint
> + route_syntax_gw=gw
> + route_syntax_del=del
> + route_syntax_netmask=netmask
> + '[' -n /sbin/ip ']'
> + '[' -z pre-init ']'
> + case "$reason" in
> + do_pre_init
> + '[' Linux = Linux ']'
> + :
> + exit 0
> using interface tun0
> S4
> S4.1
> S4.2
> S4.3
> S4.4
> IKE SA selected psk+xauth-3des-md5
> peer is using type 130 for NAT-Discovery payloads
> peer is using type 130 for NAT-Discovery payloads
> S4.5
> NAT status: NAT-T VID seen, no NAT device detected
> S4.6
> S5
> S5.1
> S5.2
> S5.3
> S5.4
> Enter Username and Password.
> S5.5
> S5.2
> S5.3
> S5.6
> S5.7
> S6
> got save password setting: 1
> got pfs setting: 0
> Remote Application Version: Cisco Systems, Inc./VPN 3000 Concentrator
> Version 4.1.7.E built by vmurphy on Mar 14 2005 11:25:43
> got address 165.91.48.19
> S7
> S7.1
> S7.2
> S7.3
> S7.4
> ignoring responder-lifetime notify
> S7.3
> S7.4
> S7.5
> S7.6
> IPSEC SA selected des-md5
> S7.7
> S7.8
> ++ uname -s
> + OS=Linux
> + DEFAULT_ROUTE_FILE=/var/run/vpnc/defaultroute
> + RESOLV_CONF_BACKUP=/var/run/vpnc/resolv.conf-backup
> ++ which ip
> ++ grep '^/'
> + IPROUTE=/sbin/ip
> + '[' Linux = Linux ']'
> + ifconfig_syntax_ptp=pointopoint
> + route_syntax_gw=gw
> + route_syntax_del=del
> + route_syntax_netmask=netmask
> + '[' -n /sbin/ip ']'
> + '[' -z connect ']'
> + case "$reason" in
> + do_connect
> + '[' -r /etc/vpnc/vpnc-script-connect-action ']'
> + '[' -n '' ']'
> + do_ifconfig
> + ifconfig tun0 inet 165.91.48.19 pointopoint 165.91.48.19 netmask
> 255.255.255.255 mtu 1390 up
> + set_vpngateway_route
> ++ ip route get 165.91.140.250
> ++ fix_ip_get_output
> ++ sed 's/cache//;s/metric \?[0-9]\+ [0-9]\+//g'
> + /sbin/ip route add 165.91.140.250 via 10.32.19.1 dev ath0 src
> 10.32.19.129 mtu 1500 advmss 1460 hoplimit 64
> + /sbin/ip route flush cache
> + test $'@Ø\005\b\021'
> + for network in '$TARGET_NETWORKS'
> + ip route del $'@Ø\005\b\021'
> + ip route add $'@Ø\005\b\021' dev tun0
> Error: an inet prefix is expected rather than "@".
> + '[' -n '128.194.178.1 128.194.198.5' ']'
> + write_resolvconf
> + case "$DNS_UPDATE" in
> + '[' -x /sbin/resolvconf ']'
> + grep '[EMAIL PROTECTED]@' /etc/resolv.conf
> + cp -- /etc/resolv.conf /var/run/vpnc/resolv.conf-backup
> + NEW_RESOLVCONF='[EMAIL PROTECTED]@ -- this file is generated by vpnc
> # and will be overwritten by vpnc
> # as long as the above mark is intact'
> + exec
> + read LINE
> + case "$LINE" in
> + '[' -n '' ']'
> + NEW_RESOLVCONF='[EMAIL PROTECTED]@ -- this file is generated by vpnc
> # and will be overwritten by vpnc
> # as long as the above mark is intact
> search tamu.edu'
> + read LINE
> + case "$LINE" in
> + '[' -n '128.194.178.1 128.194.198.5' ']'
> + read ONE_NAMESERVER INTERNAL_IP4_DNS
> + LINE='nameserver 128.194.178.1'
> + NEW_RESOLVCONF='[EMAIL PROTECTED]@ -- this file is generated by vpnc
> # and will be overwritten by vpnc
> # as long as the above mark is intact
> search tamu.edu
> nameserver 128.194.178.1'
> + read LINE
> + case "$LINE" in
> + '[' -n 128.194.198.5 ']'
> + read ONE_NAMESERVER INTERNAL_IP4_DNS
> + LINE='nameserver 128.194.198.5'
> + NEW_RESOLVCONF='[EMAIL PROTECTED]@ -- this file is generated by vpnc
> # and will be overwritten by vpnc
> # as long as the above mark is intact
> search tamu.edu
> nameserver 128.194.178.1
> nameserver 128.194.198.5'
> + read LINE
> + case "$LINE" in
> + '[' -n '' ']'
> + LINE=
> + NEW_RESOLVCONF='[EMAIL PROTECTED]@ -- this file is generated by vpnc
> # and will be overwritten by vpnc
> # as long as the above mark is intact
> search tamu.edu
> nameserver 128.194.178.1
> nameserver 128.194.198.5
> '
> + read LINE
> + exec
> + '[' -n '' ']'
> + echo '[EMAIL PROTECTED]@ -- this file is generated by vpnc
> # and will be overwritten by vpnc
> # as long as the above mark is intact
> search tamu.edu
> nameserver 128.194.178.1
> nameserver 128.194.198.5
> '
> + exit 0
> S7.9
> S7.10
> VPNC started in background (pid: 11882)...
>
> wam:/home/waqar# route -n
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric Ref Use Iface
> 165.91.140.250 10.32.19.1 255.255.255.255 UGH 0 0 0 ath0
> 10.32.19.0 0.0.0.0 255.255.255.0 U 0 0 0 ath0
> 0.0.0.0 10.32.19.1 0.0.0.0 UG 0 0 0 ath0
>
> wam:/home/waqar# ifconfig -a
> ath0 Link encap:Ethernet HWaddr 00:02:8A:E2:24:75
> inet addr:10.32.19.129 Bcast:10.32.19.255 Mask:255.255.255.0
> inet6 addr: fe80::202:8aff:fee2:2475/64 Scope:Link
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:151 errors:875 dropped:0 overruns:0 frame:875
> TX packets:158 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:200
> RX bytes:28632 (27.9 KiB) TX bytes:45480 (44.4 KiB)
> Interrupt:9 Memory:e0fc0000-e0fd0000
>
> lo Link encap:Local Loopback
> LOOPBACK MTU:16436 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>
> sit0 Link encap:IPv6-in-IPv4
> NOARP MTU:1480 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
>
> tun0 Link encap:UNSPEC HWaddr
> 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
> inet addr:165.91.48.19 P-t-P:165.91.48.19 Mask:255.255.255.255
> UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1390 Metric:1
> RX packets:0 errors:0 dropped:0 overruns:0 frame:0
> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:500
> RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
> --
> Waqar A. Malik
>
--
Na'Toth #2: Ambassador, it is not my place to speculate on how anything gets
into your bed.
-- Quotes from Babylon 5 --
