Package: munin-node Version: 1.4.5-3 Severity: normal This may be related to http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=488360 because the SMART ouput for an SAS disk looks very similar.
There is not much there but SMART Health Status, temperature, and some of the other numbers would be useful. Keep up the good work and thanks! Michael smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Device: SEAGATE ST91000640SS Version: 0004 Serial number: 9XG2NLE700009307M4S4 Device type: disk Transport protocol: SAS Local Time is: Wed Jan 30 14:06:34 2013 GMT Device supports SMART and is Enabled Temperature Warning Enabled SMART Health Status: OK Current Drive Temperature: 30 C Drive Trip Temperature: 68 C Manufactured in week 34 of year 2012 Specified cycle count over device lifetime: 10000 Accumulated start-stop cycles: 75 Specified load-unload count over device lifetime: 300000 Accumulated load-unload cycles: 184 Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 2504617167 Blocks received from initiator = 4001085716 Blocks read from cache and sent to initiator = 31486143 Number of read and write commands whose size <= segment size = 3968549 Number of read and write commands whose size > segment size = 4 Vendor (Seagate/Hitachi) factory information number of hours powered up = 1542.12 number of minutes until next internal SMART test = 6 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 3783496266 0 0 3783496266 0 904.407 0 write: 0 0 0 0 0 2050.369 0 Non-medium error count: 13 [GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on'] SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed - 143 - [- - -] Long (extended) Self Test duration: 12198 seconds [203.3 minutes] -- System Information: Debian Release: 6.0.6 APT prefers oldstable APT policy: (500, 'oldstable'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/16 CPU cores) Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1) Shell: /bin/sh linked to /bin/bash Versions of packages munin-node depends on: ii adduser 3.112+nmu2 add and remove users and groups ii gawk 1:3.1.7.dfsg-5 GNU awk, a pattern scanning and pr ii libnet-server-perl 0.97-1 An extensible, general perl server ii lsb-base 3.2-23.2squeeze1 Linux Standard Base 3.2 init scrip ii munin-common 1.4.5-3 network-wide graphing framework (c ii perl 5.10.1-17squeeze4 Larry Wall's Practical Extraction ii procps 1:3.2.8-9squeeze1 /proc file system utilities Versions of packages munin-node recommends: ii libnet-snmp-perl 5.2.0-4 Script SNMP connections Versions of packages munin-node suggests: ii ethtool 1:2.6.34-3 display or change Ethernet device ii hdparm 9.32-1 tune hard disk parameters for high pn libcache-cache-perl <none> (no description available) ii libcrypt-ssleay-perl 0.57-2 Support for https protocol in LWP ii libdbd-mysql-perl 4.016-1 Perl5 database interface to the My pn libdbd-pg-perl <none> (no description available) pn liblwp-useragent-deter <none> (no description available) pn libnet-irc-perl <none> (no description available) ii libnet-ssleay-perl 1.36-1 Perl module for Secure Sockets Lay pn libtext-csv-xs-perl <none> (no description available) ii libwww-perl 5.836-1 Perl HTTP/WWW client/server librar ii libxml-simple-perl 2.18-3 Perl module for reading and writin ii lm-sensors 1:3.1.2-6 utilities to read temperature/volt ii logtail 1.3.13 Print log file lines that have not pn munin <none> (no description available) pn munin-java-plugins <none> (no description available) ii munin-plugins-extra 1.4.5-3 network-wide graphing framework (u ii mysql-client-5.1 [mysq 5.1.66-0+squeeze1 MySQL database client binaries ii net-tools 1.60-23 The NET-3 networking toolkit ii python 2.6.6-3+squeeze7 interactive high-level object-orie ii ruby 4.5 An interpreter of object-oriented ii smartmontools 5.39.1+svn3124-2 control and monitor storage system -- Configuration Files: /etc/munin/munin-node.conf changed [not included] /etc/munin/plugin-conf.d/munin-node [Errno 13] Permission denied: u'/etc/munin/plugin-conf.d/munin-node' -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
