Package: wicd-daemon
Version: 1.7.0+ds1-5+squeeze3
Severity: important
Hi,
I work with two switches, one HP 1810 series, one HP 2910al series.
Connecting to the 1810 switch works like a charm: I select the
connection, then press "connect", and I'm connected. With the bigger
switch, I select the network, press "connect", then see how eth0 loses
link, then I get the disconnect bubble message, then link goes up again,
and I even see traffic. With network-manager, this problem does not
occur - with the same laptop, cable, and switch port (!). I can safely
rule out hardware problems, as simply stopping wicd and starting
network-manager solves the problem in this case. My laptop is a T500, so
it's only gigabit ethernet involved, on all sides.
But I would like to only use wicd, as I usually find it to be much more
reliable.
Kind regards,
--Toni++
-- System Information:
Debian Release: 6.0.6
APT prefers stable
APT policy: (990, 'stable'), (500, 'unstable'), (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 3.2.0-0.bpo.2-686-pae (SMP w/2 CPU cores)
Locale: LANG=en.US.utf8, LC_CTYPE=en_US.utf8 (charmap=locale: Cannot set LC_ALL
to default locale: No such file or directory
UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages wicd-daemon depends on:
ii adduser 3.112+nmu2 add and remove users and groups
ii dbus 1.2.24-4+squeeze1 simple interprocess messaging syst
ii debconf [debconf-2. 1.5.36.1 Debian configuration management sy
ii ethtool 1:2.6.34-3 display or change Ethernet device
ii iproute 20100519-3 networking and traffic control too
ii iputils-ping 3:20100418-3 Tools to test the reachability of
ii isc-dhcp-client [dh 4.1.1-P1-15+squeeze8 ISC DHCP client
ii lsb-base 3.2-23.2squeeze1 Linux Standard Base 3.2 init scrip
ii net-tools 1.60-23 The NET-3 networking toolkit
ii psmisc 22.11-1 utilities that use the proc file s
ii python 2.6.6-3+squeeze7 interactive high-level object-orie
ii python-dbus 0.83.1-1 simple interprocess messaging syst
ii python-gobject 2.21.4+is.2.21.3-1 Python bindings for the GObject li
ii python-iniparse 0.3.2-1 Module to access and modify config
ii python-wicd 1.7.0+ds1-5+squeeze3 wired and wireless network manager
ii wireless-tools 30~pre9-5 Tools for manipulating Linux Wirel
ii wpasupplicant 0.6.10-2.1 client support for WPA and WPA2 (I
Versions of packages wicd-daemon recommends:
ii wicd-curses [wicd-c 1.7.0+ds1-5+squeeze3 wired and wireless network manager
ii wicd-gtk [wicd-clie 1.7.0+ds1-5+squeeze3 wired and wireless network manager
Versions of packages wicd-daemon suggests:
ii pm-utils 1.3.0-3 utilities and scripts for power ma
Versions of packages wicd-gtk depends on:
ii python 2.6.6-3+squeeze7 interactive high-level object-orie
ii python-glade2 2.17.0-4 GTK+ bindings: Glade support
ii python-gtk2 2.17.0-4 Python bindings for the GTK+ widge
Versions of packages wicd-curses depends on:
ii python 2.6.6-3+squeeze7 interactive high-level object-orie
ii python-urwid 0.9.9.1-1 curses-based UI/widget library for
Versions of packages python-wicd depends on:
ii python 2.6.6-3+squeeze7 interactive high-level object-orie
ii python-support 1.0.10 automated rebuilding support for P
-- debconf information excluded
-- debsums errors found:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = "en_US:en",
LC_ALL = (unset),
LC_TIME = "en_US.utf8",
LC_CTYPE = "en_US.utf8",
LC_COLLATE = "C",
LC_MESSAGES = "C",
LANG = "en.US.utf8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
--
To UNSUBSCRIBE, email to [email protected]
with a subject of "unsubscribe". Trouble? Contact [email protected]
