Package: src
Version: 3.4.4-1~experimental.1
Severity: important
This is on an Ivy Bridge Xeon E3 with GPU. I thought it was the X
driver, because i915 KMS works fine for the console, it only crashes
when trying to bring up X. But I pulled in the 2.20.2 driver today and
it still happens. So I now think the problem is in the kernel.
It's entirely possible this is fixed in 3.5, which I will test as soon
as it hits experimental.
3.2 crashes as well, but not as hard as 3.4. With 3.2, X doesn't come
up, but you can switch to a console and reboot. 3.4 needs the reset
button.
-- Package-specific info:
** Version:
Linux version 3.4-trunk-amd64 (Debian 3.4.4-1~experimental.1)
(debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP
Tue Jun 26 17:23:03 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.4-trunk-amd64 root=/dev/mapper/luks-root ro quiet
** Not tainted
** Kernel log:
[ 43.319002] Monitor-Mwait will be used to enter C-3 state
[ 43.319016] ACPI: acpi_idle registered with cpuidle
[ 43.323450] iTCO_vendor_support: vendor-support=0
[ 43.324345] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 43.324409] iTCO_wdt: Found a Panther Point TCO device (Version=2,
TCOBASE=0x0460)
[ 43.324449] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 43.329003] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO
conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 43.329008] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 43.344385] wmi: Mapper loaded
[ 43.344513] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 43.344826] ACPI: Power Button [PWRF]
[ 43.345309] Bluetooth: Core ver 2.16
[ 43.345318] NET: Registered protocol family 31
[ 43.345319] Bluetooth: HCI device and connection manager initialized
[ 43.345321] Bluetooth: HCI socket layer initialized
[ 43.345322] Bluetooth: L2CAP socket layer initialized
[ 43.345325] Bluetooth: SCO socket layer initialized
[ 43.347792] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 43.348878] Linux media interface: v0.10
[ 43.349854] usbcore: registered new interface driver btusb
[ 43.349925] microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x10
[ 43.351137] Linux video capture interface: v2.00
[ 43.352848] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 43.352902] snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
[ 43.354422] uvcvideo: Found UVC 1.00 device <unnamed> (046d:081d)
[ 43.366279] usb 4-1.6.1: input irq status -75 received
[ 43.367115] input: UVC Camera (046d:081d) as
/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.7/4-1.7:1.2/input/input8
[ 43.367167] usbcore: registered new interface driver uvcvideo
[ 43.367168] USB Video Class driver (1.1.1)
[ 43.371842] asus_wmi: ASUS WMI generic driver loaded
[ 43.372554] asus_wmi: Initialization: 0x0
[ 43.372568] asus_wmi: BIOS WMI version: 0.9
[ 43.372592] asus_wmi: SFUN value: 0x0
[ 43.372755] input: Eee PC WMI hotkeys as
/devices/platform/eeepc-wmi/input/input9
[ 43.373301] asus_wmi: Backlight controlled by ACPI video driver
[ 43.373916] microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x10
[ 43.375110] microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x10
[ 43.376077] microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x10
[ 43.377564] microcode: Microcode Update Driver: v2.00
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 43.381261] usbcore: registered new interface driver snd-usb-audio
[ 43.390225] usb 4-1.6.1: input irq status -75 received
[ 43.402028] input: HDA Intel PCH Line as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 43.402110] input: HDA Intel PCH Front Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 43.402165] input: HDA Intel PCH Rear Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 43.402201] input: HDA Intel PCH Front Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 43.402235] input: HDA Intel PCH Line Out Side as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 43.402276] input: HDA Intel PCH Line Out CLFE as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 43.402344] input: HDA Intel PCH Line Out Surround as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 43.402436] input: HDA Intel PCH Line Out Front as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 46.841151] XFS (sde2): Mounting Filesystem
[ 47.759356] XFS (sde2): Ending clean mount
[ 47.828292] FAT-fs (sde1): utf8 is not a recommended IO charset for FAT
filesystems, filesystem will be case sensitive!
[ 47.846638] XFS (dm-8): Mounting Filesystem
[ 48.029741] XFS (dm-8): Ending clean mount
[ 48.053466] XFS (dm-9): Mounting Filesystem
[ 48.167516] XFS (dm-9): Ending clean mount
[ 48.178220] XFS (dm-7): Mounting Filesystem
[ 48.521452] XFS (dm-7): Ending clean mount
[ 49.793502] Bridge firewalling registered
[ 49.795766] device eth0 entered promiscuous mode
[ 49.801328] NET: Registered protocol family 3
[ 49.804026] NET: Registered protocol family 6
[ 49.809814] NET: Registered protocol family 11
[ 49.816674] NET: Registered protocol family 4
[ 49.829591] NET: Registered protocol family 5
[ 49.915880] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 49.923119] ADDRCONF(NETDEV_UP): br0: link is not ready
[ 51.736538] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control:
Rx/Tx
[ 51.736544] e1000e 0000:04:00.0: eth0: 10/100 speed: disabling TSO
[ 51.738750] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 51.738779] br0: port 1(eth0) entered forwarding state
[ 51.738785] br0: port 1(eth0) entered forwarding state
[ 51.740350] ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 53.245057] set resolution quirk: cval->res = 384
[ 54.646255] input: ACPI Virtual Keyboard Device as
/devices/virtual/input/input18
[ 54.766494] Bluetooth: RFCOMM TTY layer initialized
[ 54.766497] Bluetooth: RFCOMM socket layer initialized
[ 54.766498] Bluetooth: RFCOMM ver 1.11
[ 54.766692] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 54.766693] Bluetooth: BNEP filters: protocol multicast
[ 54.863129] lp: driver loaded but no devices found
[ 54.866493] ppdev: user-space parallel port driver
[ 55.011287] microcode: CPU0 updated to revision 0x12, date = 2012-04-12
[ 55.011639] microcode: CPU1 updated to revision 0x12, date = 2012-04-12
[ 55.011975] microcode: CPU2 updated to revision 0x12, date = 2012-04-12
[ 55.012318] microcode: CPU3 updated to revision 0x12, date = 2012-04-12
[ 66.732241] br0: port 1(eth0) entered forwarding state
[ 140.525755] XFS (dm-10): Mounting Filesystem
[ 140.639162] XFS (dm-10): Ending clean mount
[ 142.924350] tun: Universal TUN/TAP device driver, 1.6
[ 142.924354] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com>
[ 142.933900] device tap0 entered promiscuous mode
[ 142.933941] br0: port 2(tap0) entered forwarding state
[ 142.933948] br0: port 2(tap0) entered forwarding state
[ 142.934751] kvm: sending ioctl 5326 to a partition!
[ 142.934764] kvm: sending ioctl 80200204 to a partition!
[ 142.935317] kvm: sending ioctl 5326 to a partition!
[ 142.935326] kvm: sending ioctl 80200204 to a partition!
[ 153.843381] tap0: no IPv6 routers present
[ 157.929333] br0: port 2(tap0) entered forwarding state
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0505
board_vendor: ASUSTeK COMPUTER INC.
board_name: P8C WS
board_version: Rev 1.xx
** Loaded modules:
tun
cpufreq_stats
cpufreq_userspace
cpufreq_powersave
cpufreq_conservative
parport_pc
ppdev
lp
parport
bnep
rfcomm
uinput
appletalk
ipx
p8023
rose
netrom
ax25
bridge
stp
kvm_intel
kvm
nls_utf8
nls_cp437
vfat
fat
snd_hda_codec_realtek
eeepc_wmi
asus_wmi
sparse_keymap
snd_usb_audio
coretemp
snd_usbmidi_lib
snd_seq_midi
snd_seq_midi_event
uvcvideo
videobuf2_vmalloc
snd_hda_intel
videobuf2_memops
snd_rawmidi
videobuf2_core
snd_hda_codec
videodev
microcode
snd_hwdep
snd_seq
media
btusb
snd_pcm
snd_seq_device
pcspkr
snd_page_alloc
psmouse
snd_timer
acpi_cpufreq
serio_raw
bluetooth
mperf
rfkill
joydev
crc16
evdev
snd
i2c_i801
i2c_core
soundcore
iTCO_wdt
iTCO_vendor_support
button
video
wmi
processor
xfs
sha256_generic
usb_storage
uas
dm_crypt
efivars
dm_mirror
dm_region_hash
dm_log
hid_cherry
usbhid
hid
dm_mod
sd_mod
crc_t10dif
crc32c_intel
ghash_clmulni_intel
ehci_hcd
aesni_intel
aes_x86_64
ahci
libahci
e1000e
thermal
xhci_hcd
aes_generic
cryptd
libata
scsi_mod
fan
thermal_sys
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM
Controller [8086:0158] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor PCI Express Root Port [8086:0151] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v2/3rd
Gen Core processor Graphics Controller [8086:016a] (rev 09) (prog-if 00 [VGA
controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:06.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core
processor PCI Express Root Port [8086:015d] (rev 09) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series
Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7e1b000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e18000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset
Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:84fb]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 55
Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 6 [8086:1e1a] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.6 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset
Family PCI Express Root Port 7 [8086:1e1c] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset
Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7e17000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
a4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation C216 Series Chipset LPC Controller
[8086:1e53] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 RAID bus controller [0104]: Intel Corporation 82801 SATA Controller
[RAID mode] [8086:2822] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 51
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e16000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family
SMBus Controller [8086:1e22] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:844d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7e15000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
04:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network
Connection [8086:10d3]
Subsystem: ASUSTeK Computer Inc. Device [1043:8369]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7d00000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at e000 [size=32]
Region 3: Memory at f7d20000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
05:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network
Connection [8086:10d3]
Subsystem: ASUSTeK Computer Inc. Device [1043:8369]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at d000 [size=32]
Region 3: Memory at f7c20000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: e1000e
** USB devices:
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 046a:0023 Cherry GmbH CyMotion Master Linux Keyboard
Bus 003 Device 004: ID 1a40:0201 Terminus Technology Inc. FE 2.1 7-port Hub
Bus 003 Device 005: ID 090c:1000 Silicon Motion, Inc. - Taiwan (formerly Feiya
Technology Corp.) 64MB QDI U2 DISK
Bus 003 Device 006: ID 2433:b111
Bus 004 Device 003: ID 051d:0002 American Power Conversion Uninterruptible
Power Supply
Bus 004 Device 004: ID 0a5c:4500 Broadcom Corp. BCM2046B1 USB 2.0 Hub (part of
BCM2046 Bluetooth)
Bus 004 Device 005: ID 046d:081d Logitech, Inc. HD Webcam C510
Bus 004 Device 006: ID 046d:c03d Logitech, Inc. M-BT96a Pilot Optical Mouse
Bus 003 Device 007: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 004 Device 007: ID 0a5c:4502 Broadcom Corp. Keyboard (Boot Interface
Subclass)
Bus 004 Device 008: ID 0a5c:4503 Broadcom Corp. Mouse (Boot Interface Subclass)
Bus 004 Device 009: ID 050d:0017 Belkin Components B8T017 Bluetooth+EDR 2.1
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (500, 'testing'), (400, 'unstable'), (300, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.4-trunk-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.4-trunk-amd64 depends on:
ii debconf [debconf-2.0] 1.5.44
ii initramfs-tools [linux-initramfs-tool] 0.107
ii kmod 8-2
ii linux-base 3.5
ii module-init-tools 8-2
Versions of packages linux-image-3.4-trunk-amd64 recommends:
ii firmware-linux-free 3.1
Versions of packages linux-image-3.4-trunk-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
ii linux-doc-3.4 3.4.4-1~experimental.1
Versions of packages linux-image-3.4-trunk-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.36
ii firmware-linux-nonfree 0.36
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
