Package: linux-2.6 Version: 3.2.17-1 Severity: normal Hi!
Starting with 3.2.17-1, the CPU load accounting is broken when the computer is idle. The CPU load is reported as >0.50 when idle. 3.2.16-1 don't suffer from this problem. Suspected patch is the upstream patch "sched: Fix nohz load accounting -- again!" commit 5e2d50da11f0e6ec3ce8fe658d7c83b0b4346c68 to 3.2 and originating from c308b56b5398779cd3da0f62ab26b0453494c3d4 . See also: https://bugs.launchpad.net/unity/+bug/991370 https://lkml.org/lkml/2012/5/22/310 https://bugzilla.redhat.com/show_bug.cgi?id=822877 https://bbs.archlinux.org/viewtopic.php?id=141289 / Anders -- Package-specific info: ** Version: Linux version 3.2.0-2-amd64 (Debian 3.2.17-1) (debian-ker...@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-5) ) #1 SMP Sat May 12 23:08:28 UTC 2012 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=/dev/sdb1 ro vga=771 video=vesafb:vtotal:128,mtrr:3 hpet=force sata_nv.adma=1 acpi_enforce_resources=lax devtmpfs.mount=1 quiet ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 5.536456] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported [ 5.536480] ehci_hcd 0000:00:0b.1: irq 22, io mem 0x80005000 [ 5.548119] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00 [ 5.548155] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.548159] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.548161] usb usb1: Product: EHCI Host Controller [ 5.548164] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd [ 5.548166] usb usb1: SerialNumber: 0000:00:0b.1 [ 5.548317] hub 1-0:1.0: USB hub found [ 5.548323] hub 1-0:1.0: 10 ports detected [ 5.550452] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.551004] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 5.551027] ohci_hcd 0000:00:0b.0: setting latency timer to 64 [ 5.551030] ohci_hcd 0000:00:0b.0: OHCI Host Controller [ 5.551043] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 [ 5.551078] ohci_hcd 0000:00:0b.0: irq 23, io mem 0x80000000 [ 5.606029] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.606034] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.606037] usb usb2: Product: OHCI Host Controller [ 5.606039] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ohci_hcd [ 5.606042] usb usb2: SerialNumber: 0000:00:0b.0 [ 5.606285] hub 2-0:1.0: USB hub found [ 5.606292] hub 2-0:1.0: 10 ports detected [ 5.606871] EDAC amd64: DRAM ECC disabled. [ 5.606877] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 5.606878] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 5.606880] (Note that use of the override may cause unknown side effects.) [ 5.607147] pata_amd 0000:00:0f.0: version 0.4.1 [ 5.607194] pata_amd 0000:00:0f.0: setting latency timer to 64 [ 5.607709] scsi4 : pata_amd [ 5.607832] scsi5 : pata_amd [ 5.609035] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 5.609038] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 5.609520] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22 [ 5.609526] snd_intel8x0 0000:00:0d.0: PCI INT A -> Link[LACI] -> GSI 22 (level, low) -> IRQ 22 [ 5.609549] snd_intel8x0 0000:00:0d.0: setting latency timer to 64 [ 5.764418] ata5.00: ATAPI: SONY DVD-ROM DDU1612, DYS3, max UDMA/33 [ 5.764428] ata5: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11) [ 5.764836] ata5.00: configured for UDMA/33 [ 5.765623] scsi 4:0:0:0: CD-ROM SONY DVD-ROM DDU1612 DYS3 PQ: 0 ANSI: 5 [ 5.818930] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19 [ 5.818953] nvidia 0000:03:00.0: PCI INT A -> Link[LNKA] -> GSI 19 (level, low) -> IRQ 19 [ 5.818963] nvidia 0000:03:00.0: setting latency timer to 64 [ 5.818968] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 5.819330] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.49 Mon Apr 30 23:46:33 PDT 2012 [ 5.937948] sr0: scsi3-mmc drive: 40x/40x cd/rw xa/form2 cdda tray [ 5.937953] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 5.938326] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 5.940030] intel8x0_measure_ac97_clock: measured 55865 usecs (2744 samples) [ 5.940034] intel8x0: clocking to 46907 [ 6.076462] ata1.00: configured for UDMA/133 [ 6.076469] ata1: EH complete [ 6.108028] usb 2-2: new low-speed USB device number 2 using ohci_hcd [ 6.148132] ata3.00: configured for UDMA/133 [ 6.148137] ata3: EH complete [ 6.206396] input: PS/2 Logitech Mouse as /devices/platform/i8042/serio1/input/input4 [ 6.322032] usb 2-2: New USB device found, idVendor=046d, idProduct=c050 [ 6.322037] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.322040] usb 2-2: Product: USB-PS/2 Optical Mouse [ 6.322043] usb 2-2: Manufacturer: Logitech [ 6.346319] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input5 [ 6.346507] generic-usb 0003:046D:C050.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-2/input0 [ 6.346567] usbcore: registered new interface driver usbhid [ 6.346569] usbhid: USB HID core driver [ 8.202589] Adding 2047996k swap on /dev/sdb2. Priority:-1 extents:1 across:2047996k SSD [ 8.217882] EXT4-fs (sdb1): re-mounted. Opts: (null) [ 8.349387] EXT4-fs (sdb1): re-mounted. Opts: acl,discard,user_xattr,errors=remount-ro [ 8.365492] Software Watchdog Timer: 0.07 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout= 0) [ 8.368785] it87: Found IT8712F chip at 0xd00, revision 7 [ 8.368794] it87: VID is disabled (pins used for GPIO) [ 8.368840] ACPI: resource it87 [io 0x0d05-0x0d06] conflicts with ACPI region ECRE [io 0xd00-0xd1f] [ 8.368843] ACPI: This conflict may cause random problems and system instability [ 8.368845] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 9.109824] RPC: Registered named UNIX socket transport module. [ 9.109828] RPC: Registered udp transport module. [ 9.109830] RPC: Registered tcp transport module. [ 9.109832] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.116286] FS-Cache: Loaded [ 9.131273] FS-Cache: Netfs 'nfs' registered for caching [ 9.138885] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 9.627151] fuse init (API version 7.17) [ 10.321514] nvidia 0000:03:00.0: irq 45 for MSI/MSI-X [ 10.332339] CacheFiles: Loaded [ 10.423063] FS-Cache: Cache "mycache" added (type cachefiles) [ 10.423069] CacheFiles: File cache on sdb1 registered [ 10.583454] lp: driver loaded but no devices found [ 10.587729] ppdev: user-space parallel port driver [ 11.608293] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4400+ (2 cpu cores) (version 2.20.00) [ 11.608355] powernow-k8: fid 0xe (2200 MHz), vid 0x8 [ 11.608358] powernow-k8: fid 0xc (2000 MHz), vid 0xa [ 11.608360] powernow-k8: fid 0xa (1800 MHz), vid 0xc [ 11.608362] powernow-k8: fid 0x2 (1000 MHz), vid 0x12 [ 14.396047] ata3.00: exception Emask 0x1 SAct 0x0 SErr 0x0 action 0x0 [ 14.396053] ata3.00: CPB resp_flags 0x11: , CMD error [ 14.396058] ata3.00: failed command: SMART [ 14.396066] ata3.00: cmd b0/db:f8:00:4f:c2/00:00:00:00:00/00 tag 0 [ 14.396067] res 51/04:f8:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error) [ 14.396071] ata3.00: status: { DRDY ERR } [ 14.396073] ata3.00: error: { ABRT } [ 19.832051] eth0: no IPv6 routers present ** Model information sys_vendor: System manufacturer product_name: System Product Name product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 1303 board_vendor: ASUSTeK Computer INC. board_name: A8N32-SLI-Deluxe board_version: Rev 1.xx ** Loaded modules: autofs4 powernow_k8 mperf cpufreq_conservative cpufreq_userspace cpufreq_powersave cpufreq_stats parport_pc ppdev lp parport cachefiles binfmt_misc fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc eeprom it87 hwmon_vid softdog usbhid hid sr_mod cdrom nvidia(P) ohci_hcd snd_intel8x0 snd_ac97_codec snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer pata_amd snd soundcore psmouse ac97_bus edac_mce_amd ehci_hcd serio_raw forcedeth floppy edac_core pcspkr k8temp evdev usbcore usb_common i2c_nforce2 i2c_core button processor thermal_sys ext4 crc16 jbd2 mbcache sd_mod crc_t10dif ata_generic sata_nv libata scsi_mod ** PCI devices: 00:00.0 RAM memory [0500]: NVIDIA Corporation C51 Host Bridge [10de:02f4] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81d2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:00.1 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 0 [10de:02fa] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81d2] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.2 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 1 [10de:02fe] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81d2] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.3 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 5 [10de:02f8] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81d2] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.4 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 4 [10de:02f9] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81d2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.5 RAM memory [0500]: NVIDIA Corporation C51 Host Bridge [10de:02ff] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81d2] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:00.6 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 3 [10de:027f] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81d2] Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:00.7 RAM memory [0500]: NVIDIA Corporation C51 Memory Controller 2 [10de:027e] (rev a2) Subsystem: ASUSTeK Computer Inc. Device [1043:81d2] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:02.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fc] (rev a1) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:03.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fd] (rev a1) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:04.0 PCI bridge [0604]: NVIDIA Corporation C51 PCI Express Bridge [10de:02fb] (rev a1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: ddf00000-dfffffff Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:09.0 Memory controller [0580]: NVIDIA Corporation CK804 Memory Controller [10de:005e] (rev a4) Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard [1043:815a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:0a.0 ISA bridge [0601]: NVIDIA Corporation CK804 ISA Bridge [10de:0050] (rev a4) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:0a.1 SMBus [0c05]: NVIDIA Corporation CK804 SMBus [10de:0052] (rev a2) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a] Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at ec00 [size=32] Region 4: I/O ports at 0600 [size=64] Region 5: I/O ports at 0700 [size=64] Capabilities: <access denied> Kernel driver in use: nForce2_smbus 00:0b.0 USB controller [0c03]: NVIDIA Corporation CK804 USB Controller [10de:005a] (rev a2) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: ohci_hcd 00:0b.1 USB controller [0c03]: NVIDIA Corporation CK804 USB Controller [10de:005b] (rev a4) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin B routed to IRQ 22 Region 0: Memory at 80005000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:0d.0 Multimedia audio controller [0401]: NVIDIA Corporation CK804 AC'97 Audio Controller [10de:0059] (rev a2) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:812a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (500ns min, 1250ns max) Interrupt: pin A routed to IRQ 22 Region 0: I/O ports at e400 [size=256] Region 1: I/O ports at e000 [size=256] Region 2: Memory at 80001000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: snd_intel8x0 00:0f.0 IDE interface [0101]: NVIDIA Corporation CK804 IDE [10de:0053] (rev f3) (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1] Region 4: I/O ports at ffa0 [size=16] Capabilities: <access denied> Kernel driver in use: pata_amd 00:10.0 IDE interface [0101]: NVIDIA Corporation CK804 Serial ATA Controller [10de:0054] (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. A8N-E Mainboard [1043:815a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 21 Region 0: I/O ports at dc00 [size=8] Region 1: I/O ports at d880 [size=4] Region 2: I/O ports at d800 [size=8] Region 3: I/O ports at d480 [size=4] Region 4: I/O ports at d400 [size=16] Region 5: Memory at 80002000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv 00:11.0 IDE interface [0101]: NVIDIA Corporation CK804 Serial ATA Controller [10de:0055] (rev f3) (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:815a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 (750ns min, 250ns max) Interrupt: pin A routed to IRQ 20 Region 0: I/O ports at d080 [size=8] Region 1: I/O ports at d000 [size=4] Region 2: I/O ports at cc00 [size=8] Region 3: I/O ports at c880 [size=4] Region 4: I/O ports at c800 [size=16] Region 5: Memory at 80003000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: sata_nv 00:12.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCI Bridge [10de:005c] (rev a2) (prog-if 01 [Subtractive decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=64 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn- 00:13.0 Bridge [0680]: NVIDIA Corporation CK804 Ethernet Controller [10de:0057] (rev a3) Subsystem: ASUSTeK Computer Inc. K8N4-E or A8N-E Mainboard [1043:8141] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 (250ns min, 5000ns max) Interrupt: pin A routed to IRQ 23 Region 0: Memory at 80004000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at c480 [size=8] Capabilities: <access denied> Kernel driver in use: forcedeth 00:16.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:17.0 PCI bridge [0604]: NVIDIA Corporation CK804 PCIE Bridge [10de:005d] (rev a3) (prog-if 00 [Normal decode]) Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: k8temp 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation NV44 [GeForce 7100 GS] [10de:016a] (rev a1) (prog-if 00 [VGA controller]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at df000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at de000000 (64-bit, non-prefetchable) [size=16M] [virtual] Expansion ROM at ddfe0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: nvidia ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 046d:c050 Logitech, Inc. RX 250 Optical Mouse *** Please consider answering these questions, where appropriate *** * What led up to the situation? * What exactly did you do (or not do) that was effective (or ineffective)? * What was the outcome of this action? * What outcome did you expect instead? *** End of the template - remove these lines *** -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (990, 'testing'), (70, 'testing-proposed-updates'), (60, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-2-amd64 (SMP w/2 CPU cores) Locale: LANG=C, LC_CTYPE=C (charmap=UTF-8) (ignored: LC_ALL set to sv_SE.UTF8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.43 ii initramfs-tools [linux-initramfs-tool] 0.102 ii kmod 6-2 ii linux-base 3.5 ii module-init-tools 6-2 Versions of packages linux-image-3.2.0-2-amd64 recommends: ii firmware-linux-free 3 Versions of packages linux-image-3.2.0-2-amd64 suggests: pn grub-pc 1.99-21 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-2-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-2-amd64/postinst/depmod-error-initrd-3.2.0-2-amd64: false linux-image-3.2.0-2-amd64/postinst/missing-firmware-3.2.0-2-amd64: linux-image-3.2.0-2-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-2-amd64/prerm/removing-running-kernel-3.2.0-2-amd64: true -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
