Package: linux-2.6
Version: 3.2.15-1
Severity: normal
Dear Maintainer,
After updating the kernel, I no longer have a picture on my TV. This box acts
as HTPC, the TV is the only display device I have. I do have picture in BIOS
and Grub, but the TV switches to standby mode as soon as the kernel takes over
(I'm assuming it's fed an unsupported mode).
I first tried downgrading the xorg-video-radeon driver, but that had no effect.
After that I tried booting the 3.2.0-1 I had lingering around; that version
worked with both the old and new X driver, so the problem doesn't appear to be
in X.
The difference also shows in Xorg logs. The working kernel looks like this:
[ 18.948] (II) RADEON(0): Output Composite has no monitor section
[ 18.978] (II) RADEON(0): EDID for output DVI-0
[ 18.978] (II) RADEON(0): Printing probed modes for output DVI-0
[ snip lots of modelines ]
The non-working kernel causes these X logs:
[ 10.572] (II) RADEON(0): Output Composite has no monitor section
[ 10.576] (II) RADEON(0): EDID for output DVI-0
[ 10.616] (II) RADEON(0): EDID for output Composite
[ 10.616] (II) RADEON(0): Output DVI-0 disconnected
[ 10.616] (II) RADEON(0): Output Composite disconnected
[ 10.616] (WW) RADEON(0): No outputs definitely connected, trying again...
[ 10.616] (II) RADEON(0): Output DVI-0 disconnected
[ 10.616] (II) RADEON(0): Output Composite disconnected
[ 10.616] (WW) RADEON(0): Unable to find connected outputs - setting
1024x768 initial framebuffer
There is no recent mention of EDID parsing in the changelog, but I'm pretty
sure that I've ran an earlier version of 3.2.0-2 succesfully on this box. I'll
see if I can fetch some older 3.2.0-2 kernels to narrow down the search.
A final note on the automatically collected information below:
pn firmware-linux-nonfree 0.35
Whereas a manual query says:
$ dpkg -la|grep firm
ii firmware-linux-free 3 Binary firmware for various drivers in the
Linux kernel
ii firmware-linux-nonfree 0.35 Binary firmware for various drivers in the
Linux kernel
Regards,
Arno
-- Package-specific info:
** Version:
Linux version 3.2.0-2-amd64 (Debian 3.2.15-1) (debian-ker...@lists.debian.org)
(gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Sun Apr 15 16:47:38 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-2-amd64 root=/dev/mapper/satyr-root ro
** Not tainted
** Kernel log:
[ 2.939252] sda: sda1 sda2 sda3
[ 2.941026] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.965408] sdb: sdb1 sdb2 sdb3
[ 2.967320] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.971573] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 2.973001] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.974636] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 3.001225] usb 5-1: New USB device found, idVendor=0a12, idProduct=0001
[ 3.002676] usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 3.004131] usb 5-1: Product: BT2.0
[ 3.252289] usb 5-2: new low-speed USB device number 3 using uhci_hcd
[ 3.410220] usb 5-2: New USB device found, idVendor=15c2, idProduct=0036
[ 3.413227] usb 5-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.414859] device-mapper: uevent: version 1.0.3
[ 3.416499] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-de...@redhat.com
[ 3.419683] usbcore: registered new interface driver usbhid
[ 3.421310] usbhid: USB HID core driver
[ 3.553916] kjournald starting. Commit interval 5 seconds
[ 3.553949] EXT3-fs (dm-0): mounted filesystem with ordered data mode
[ 3.841954] udevd[379]: starting version 175
[ 3.880551] ACPI: duty_cycle spans bit 4
[ 3.882202] ACPI: processor limited to max C-state 1
[ 3.912642] EDAC MC: Ver: 2.1.0
[ 3.915328] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 3.917088] MCE: In-kernel MCE decoding enabled.
[ 3.919710] AMD64 EDAC driver v3.4.0
[ 3.922360] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring
disabled
[ 3.924558] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00,
revision 0
[ 3.925353] scsi 6:0:0:0: Direct-Access Myson CS8819A2-113 0 1.01
PQ: 0 ANSI: 0 CCS
[ 3.925855] scsi 6:0:0:1: Direct-Access Myson CS8819A2-113 1 1.01
PQ: 0 ANSI: 0 CCS
[ 3.926476] scsi 6:0:0:2: Direct-Access Myson CS8819A2-113 2 1.01
PQ: 0 ANSI: 0 CCS
[ 3.927108] scsi 6:0:0:3: Direct-Access Myson CS8819A2-113 3 1.01
PQ: 0 ANSI: 0 CCS
[ 3.936758] EDAC amd64: DRAM ECC disabled.
[ 3.937662] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 3.939598] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 3.940485] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 3.941227] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 3.944781] EDAC amd64: ECC disabled in the BIOS or no ECC capability,
module will not load.
[ 3.944783] Either enable ECC checking or force module loading by setting
'ecc_enable_override'.
[ 3.944784] (Note that use of the override may cause unknown side effects.)
[ 3.954461] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 3.956191] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 3.956256] input: iMON Panel, Knob and Mouse(15c2:0036) as
/devices/pci0000:00/0000:00:14.4/0000:03:07.1/usb5/5-2/5-2:1.0/input/input4
[ 3.961126] IR NEC protocol handler initialized
[ 3.962817] Bluetooth: Core ver 2.16
[ 3.964523] NET: Registered protocol family 31
[ 3.966154] Bluetooth: HCI device and connection manager initialized
[ 3.967794] Bluetooth: HCI socket layer initialized
[ 3.969398] Bluetooth: L2CAP socket layer initialized
[ 3.970992] IR RC5(x) protocol handler initialized
[ 3.971001] Bluetooth: SCO socket layer initialized
[ 3.977198] IR RC6 protocol handler initialized
[ 3.980868] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 3.982633] usbcore: registered new interface driver btusb
[ 3.984252] IR JVC protocol handler initialized
[ 3.988189] IR Sony protocol handler initialized
[ 3.993718] IR MCE Keyboard/mouse protocol handler initialized
[ 3.996033] Registered IR keymap rc-imon-pad
[ 3.997615] input: iMON Remote (15c2:0036) as
/devices/pci0000:00/0000:00:14.4/0000:03:07.1/usb5/5-2/5-2:1.0/rc/rc0/input5
[ 3.999205] rc0: iMON Remote (15c2:0036) as
/devices/pci0000:00/0000:00:14.4/0000:03:07.1/usb5/5-2/5-2:1.0/rc/rc0
[ 4.003431] lirc_dev: IR Remote Control driver registered, major 251
[ 4.007402] IR LIRC bridge handler initialized
[ 4.008124] imon 5-2:1.0: iMON device (15c2:0036, intf0) on usb<5:3>
initialized
[ 4.008143] imon 5-2:1.1: iMON device (15c2:0036, intf1) on usb<5:3>
initialized
[ 4.008159] usbcore: registered new interface driver imon
[ 4.025255] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 4.059285] hda_codec: ALC883: BIOS auto-probing.
[ 4.070938] input: HDA ATI SB Headphone as
/devices/pci0000:00/0000:00:14.2/sound/card0/input6
[ 4.207906] Adding 2097148k swap on /dev/sdb1. Priority:-1 extents:1
across:2097148k
[ 4.260370] EXT3-fs (dm-0): using internal journal
[ 4.279747] loop: module loaded
[ 4.292114] lp: driver loaded but no devices found
[ 4.299947] it87: Found IT8716F chip at 0xe80, revision 1
[ 4.301695] ACPI: resource it87 [io 0x0e85-0x0e86] conflicts with ACPI
region HWRE [io 0xe85-0xe86]
[ 4.303397] ACPI: If an ACPI driver is available for this device, you should
use it instead of the native driver
[ 4.988237] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts:
(null)
[ 4.998764] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts:
(null)
[ 5.029054] SGI XFS with ACLs, security attributes, realtime, large
block/inode numbers, no debug enabled
[ 5.031214] SGI XFS Quota Management subsystem
[ 5.033830] XFS (dm-2): Mounting Filesystem
[ 5.180050] XFS (dm-2): Ending clean mount
[ 5.197953] kjournald starting. Commit interval 5 seconds
[ 5.199789] EXT3-fs (sda2): using internal journal
[ 5.201603] EXT3-fs (sda2): mounted filesystem with ordered data mode
[ 5.367191] atl1 0000:02:00.0: irq 43 for MSI/MSI-X
[ 5.367271] atl1 0000:02:00.0: eth0 link is up 1000 Mbps full duplex
[ 6.451729] fuse init (API version 7.17)
[ 6.612600] RPC: Registered named UNIX socket transport module.
[ 6.612603] RPC: Registered udp transport module.
[ 6.612605] RPC: Registered tcp transport module.
[ 6.612606] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.621243] FS-Cache: Loaded
[ 6.634660] FS-Cache: Netfs 'nfs' registered for caching
[ 6.642846] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[ 6.910938] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.910942] Bluetooth: BNEP filters: protocol multicast
[ 6.912262] Bluetooth: RFCOMM TTY layer initialized
[ 6.912268] Bluetooth: RFCOMM socket layer initialized
[ 6.912270] Bluetooth: RFCOMM ver 1.11
[ 10.700995] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1104
board_vendor: ASUSTeK Computer INC.
board_name: M3A
board_version: Rev 1.xx
** Loaded modules:
autofs4
rfcomm
bnep
rpcsec_gss_krb5
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
binfmt_misc
fuse
xfs
ext4
jbd2
k8temp
hwmon_vid
lp
parport
loop
snd_hda_codec_realtek
snd_hda_intel
snd_hda_codec
snd_hwdep
snd_pcm_oss
ir_lirc_codec
snd_mixer_oss
lirc_dev
snd_pcm
ir_mce_kbd_decoder
snd_page_alloc
ir_sony_decoder
snd_seq_midi
snd_seq_midi_event
ir_jvc_decoder
btusb
snd_rawmidi
ir_rc6_decoder
snd_seq
rc_imon_pad
ir_rc5_decoder
snd_seq_device
bluetooth
ir_nec_decoder
imon
sp5100_tco
snd_timer
rc_core
rfkill
crc16
snd
soundcore
edac_mce_amd
asus_atk0110
pcspkr
i2c_piix4
k10temp
edac_core
evdev
processor
thermal_sys
ext3
mbcache
jbd
usbhid
hid
dm_mod
sr_mod
cdrom
sd_mod
crc_t10dif
usb_storage
ata_generic
uas
ahci
libahci
pata_atiixp
uhci_hcd
ohci_hcd
libata
radeon
ehci_hcd
power_supply
i2c_algo_bit
drm_kms_helper
ttm
scsi_mod
button
atl1
mii
drm
usbcore
i2c_core
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] nee ATI RX780/RX790
Chipset Host Bridge [1002:5957]
Subsystem: Advanced Micro Devices [AMD] nee ATI RX780/RX790 Chipset
Host Bridge [1002:5957]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD790 PCI to
PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-fe9fffff
Prefetchable memory behind bridge: 00000000f8000000-00000000fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI RD790 PCI to
PCI bridge (PCI express gpp port C) [1002:597c] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:12.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB600
Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8231]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at c000 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at a000 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8000 [size=16]
Region 5: Memory at fe8ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB
(OHCI0) [1002:4387] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe8fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB
(OHCI1) [1002:4388] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe8fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB
(OHCI2) [1002:4389] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe8fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.3 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB
(OHCI3) [1002:438a] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe8fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.4 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB
(OHCI4) [1002:438b] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe8fa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.5 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB600 USB
Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus
Controller [1002:4385] (rev 14)
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 0b00 [size=16]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: Advanced Micro Devices [AMD] nee ATI SB600 IDE
[1002:438c] (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia
(Intel HDA) [1002:4383]
Subsystem: ASUSTeK Computer Inc. Device [1043:829e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe8f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] nee ATI SB600 PCI to
LPC Bridge [1002:438d]
Subsystem: ASUSTeK Computer Inc. Device [1043:81ef]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to
PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
HyperTransport Configuration [1022:1200]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Address Map [1022:1201]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
DRAM Controller [1022:1202]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Miscellaneous Control [1022:1203]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor
Link Control [1022:1204]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI
RV515 [Radeon X1300] [1002:7146] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited Device [174b:0940]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f8000000 (64-bit, prefetchable) [size=64M]
Region 2: Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at d000 [size=256]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Display controller [0380]: Advanced Micro Devices [AMD] nee ATI RV515
[Radeon X1300] (Secondary) [1002:7166]
Subsystem: PC Partner Limited Device [174b:0941]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Region 0: Memory at fe9e0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
02:00.0 Ethernet controller [0200]: Atheros Communications Inc. Attansic L1
Gigabit Ethernet [1969:1048] (rev b0)
Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at feac0000 (64-bit, non-prefetchable) [size=256K]
Expansion ROM at feaa0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: atl1
03:07.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 4: I/O ports at e800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
03:07.1 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller [1106:3038] (rev 62) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
[1106:3038]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 23
Region 4: I/O ports at e400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
03:07.2 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev
65) (prog-if 20 [EHCI])
Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 20
Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
03:07.3 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire
II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 46) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394
OHCI Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at e000 [size=128]
Capabilities: <access denied>
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 04cf:8819 Myson Century, Inc. USB 2.0 SD/MMC Reader
Bus 005 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle
(HCI mode)
Bus 005 Device 003: ID 15c2:0036 SoundGraph Inc. LC16M VFD Display/IR Receiver
-- System Information:
Debian Release: wheezy/sid
APT prefers testing
APT policy: (990, 'testing'), (900, 'stable'), (300, 'unstable'), (200,
'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-2-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.42
ii initramfs-tools [linux-initramfs-tool] 0.101
ii kmod 6-2
ii linux-base 3.5
ii module-init-tools 6-2
Versions of packages linux-image-3.2.0-2-amd64 recommends:
ii firmware-linux-free 3
Versions of packages linux-image-3.2.0-2-amd64 suggests:
pn grub-pc 1.99-21
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree 0.35
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-2-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-2-amd64/postinst/depmod-error-initrd-3.2.0-2-amd64: false
linux-image-3.2.0-2-amd64/postinst/missing-firmware-3.2.0-2-amd64:
linux-image-3.2.0-2-amd64/prerm/removing-running-kernel-3.2.0-2-amd64: true
--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
