hda:
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: SAMSUNG SP1614N
Serial Number: S016J10X634621
Firmware Version: TM100-24
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Tue Feb 1 17:19:14 2005 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (5760) seconds.
Offline data collection
capabilities: (0x1b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
No Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 96) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always
- 12
3 Spin_Up_Time 0x0007 058 001 000 Pre-fail Always
- 7040
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 146
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always
- 0
7 Seek_Error_Rate 0x000b 253 253 051 Pre-fail Always
- 0
8 Seek_Time_Performance 0x0024 091 088 000 Old_age Offline
- 9315
9 Power_On_Half_Minutes 0x0032 100 100 000 Old_age Always
- 3674h+34m
10 Spin_Retry_Count 0x0013 253 253 049 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 114
194 Temperature_Celsius 0x0022 163 109 000 Old_age Always
- 25
195 Hardware_ECC_Recovered 0x000a 100 100 000 Old_age Always
- 504311897
196 Reallocated_Event_Count 0x0012 100 100 000 Old_age Always
- 1
197 Current_Pending_Sector 0x0033 253 253 010 Pre-fail Always
- 0
198 Offline_Uncorrectable 0x0031 100 100 010 Pre-fail Offline
- 1
199 UDMA_CRC_Error_Count 0x000b 100 100 051 Pre-fail Always
- 0
200 Multi_Zone_Error_Rate 0x000b 100 100 051 Pre-fail Always
- 0
201 Soft_Read_Error_Rate 0x000b 100 100 051 Pre-fail Always
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 3660 -
# 2 Short offline Completed without error 00% 3529 -
# 3 Short offline Completed without error 00% 3507 -
# 4 Short offline Completed without error 00% 3484 -
# 5 Short offline Completed without error 00% 3462 -
# 6 Extended offline Completed without error 00% 3442 -
# 7 Short offline Completed without error 00% 3440 -
# 8 Short offline Completed without error 00% 3400 -
# 9 Short offline Completed without error 00% 3377 -
#10 Short offline Completed without error 00% 3355 -
#11 Extended offline Completed without error 00% 3334 -
#12 Short offline Completed without error 00% 3331 -
#13 Short offline Completed without error 00% 3309 -
#14 Short offline Completed without error 00% 3286 -
#15 Short offline Completed without error 00% 3264 -
#16 Short offline Completed without error 00% 3241 -
#17 Short offline Completed without error 00% 3219 -
#18 Short offline Completed without error 00% 3196 -
#19 Extended offline Completed without error 00% 3176 -
#20 Short offline Completed without error 00% 3174 -
#21 Short offline Completed without error 00% 3151 -
Device does not support Selective Self Tests/Logging
hdb:
smartctl version 5.32 Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: Maxtor 6Y120P0
Serial Number: Y3M0C4CE
Firmware Version: YAR41BW0
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: ATA/ATAPI-7 T13 1532D revision 0
Local Time is: Tue Feb 1 17:19:19 2005 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 242) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 54) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
3 Spin_Up_Time 0x0027 203 203 063 Pre-fail Always
- 11108
4 Start_Stop_Count 0x0032 253 253 000 Old_age Always
- 154
5 Reallocated_Sector_Ct 0x0033 253 253 063 Pre-fail Always
- 0
6 Read_Channel_Margin 0x0001 253 253 100 Pre-fail Offline
- 0
7 Seek_Error_Rate 0x000a 253 252 000 Old_age Always
- 0
8 Seek_Time_Performance 0x0027 253 241 187 Pre-fail Always
- 42805
9 Power_On_Minutes 0x0032 234 234 000 Old_age Always
- 297h+33m
10 Spin_Retry_Count 0x002b 253 252 157 Pre-fail Always
- 0
11 Calibration_Retry_Count 0x002b 253 252 223 Pre-fail Always
- 0
12 Power_Cycle_Count 0x0032 253 253 000 Old_age Always
- 200
192 Power-Off_Retract_Count 0x0032 253 253 000 Old_age Always
- 0
193 Load_Cycle_Count 0x0032 253 253 000 Old_age Always
- 0
194 Temperature_Celsius 0x0032 253 253 000 Old_age Always
- 31
195 Hardware_ECC_Recovered 0x000a 253 252 000 Old_age Always
- 3525
196 Reallocated_Event_Count 0x0008 253 253 000 Old_age Offline
- 0
197 Current_Pending_Sector 0x0008 253 253 000 Old_age Offline
- 0
198 Offline_Uncorrectable 0x0008 253 253 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0008 199 199 000 Old_age Offline
- 0
200 Multi_Zone_Error_Rate 0x000a 253 252 000 Old_age Always
- 0
201 Soft_Read_Error_Rate 0x000a 253 013 000 Old_age Always
- 1
202 TA_Increase_Count 0x000a 253 252 000 Old_age Always
- 0
203 Run_Out_Cancel 0x000b 253 252 180 Pre-fail Always
- 1
204 Shock_Count_Write_Opern 0x000a 253 252 000 Old_age Always
- 0
205 Shock_Rate_Write_Opern 0x000a 253 252 000 Old_age Always
- 0
207 Spin_High_Current 0x002a 253 252 000 Old_age Always
- 0
208 Spin_Buzz 0x002a 253 252 000 Old_age Always
- 0
209 Offline_Seek_Performnce 0x0024 194 194 000 Old_age Offline
- 0
99 Unknown_Attribute 0x0004 253 253 000 Old_age Offline
- 0
100 Unknown_Attribute 0x0004 253 253 000 Old_age Offline
- 0
101 Unknown_Attribute 0x0004 253 253 000 Old_age Offline
- 0
SMART Error Log Version: 1
ATA Error Count: 1
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 1 occurred at disk power-on lifetime: 6282 hours (261 days + 18 hours)
When the command that caused the error occurred, the device was in an unknown
state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 60 5f eb 97 ed Error: UNC 96 sectors at LBA = 0x0d97eb5f = 228059999
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 5f eb 97 ed 08 05:04:45.872 READ DMA
c8 00 00 5f ea 97 ed 08 05:04:45.872 READ DMA
c8 00 00 5f e9 97 ed 08 05:04:45.872 READ DMA
c8 00 00 5f e8 97 ed 08 05:04:45.856 READ DMA
c8 00 00 5f e7 97 ed 08 05:04:45.856 READ DMA
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Short offline Completed without error 00% 6408 -
# 2 Short offline Completed without error 00% 6295 -
# 3 Short offline Completed without error 00% 6272 -
# 4 Short offline Completed without error 00% 6250 -
# 5 Short offline Completed without error 00% 6228 -
# 6 Extended offline Completed without error 00% 6207 -
# 7 Short offline Completed without error 00% 6205 -
# 8 Short offline Completed without error 00% 6165 -
# 9 Short offline Completed without error 00% 6143 -
#10 Short offline Completed without error 00% 6120 -
#11 Extended offline Completed without error 00% 6098 -
#12 Short offline Completed without error 00% 6096 -
#13 Short offline Completed without error 00% 6074 -
#14 Short offline Completed without error 00% 6051 -
#15 Short offline Completed without error 00% 6029 -
#16 Short offline Completed without error 00% 6007 -
#17 Short offline Completed without error 00% 5984 -
#18 Short offline Completed without error 00% 5962 -
#19 Extended offline Completed without error 00% 5941 -
#20 Short offline Completed without error 00% 5939 -
#21 Short offline Completed without error 00% 5917 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
