Package: arson
Version: 0.9.8beta2-1
Severity: normal
I cannot get the following to work:
using cdrecord for burning data-cds (ISO-Image burning) in burning mode
"simulation + writing" (see log files below).
When I select only "simulation" or only "writing" both is fine. But together
it fails; the simulation is successfull, and then nothing happens.
In the GUI the display stays at "Simulation was successfull", no action
anymore on the drive; the writing command from cdrecord is executed though (see
the logs below).
This only happens with data cds. And it only happens, if cdrecord is used
for burning the data cd. With cdrdao all is fine in every combination
(audio cds are fine with both, cdrecord and cdrdao).
Here is the output from the gui, when trying to simulate + write a
data cd with cdrecord:
---- snip
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent
defaults.
cdrecord: Continuing in 5 seconds...
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
SCSI buffer size: 64512
Cdrecord-Clone 2.01a34 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�rg
Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <[EMAIL PROTECTED]>.
The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnproof'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'QSI '
Identifikation : 'DVD/CDRW SBW-161'
Revision : 'SX09'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x000A
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 0 MB
Total size: 0 MB (00:05.62) = 422 sectors
Lout start: 1 MB (00:07/47) = 422 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11078 (97:34/22)
ATIP start of lead out: 359849 (79:59/74)
1T speed low: 0 (reserved val 0) 1T speed high: 4
2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
power mult factor: 3 5
recommended erase/write power: 3
A1 values: 02 3A B0
A2 values: 5C C6 26
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 359427
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is ON.
Starting new track at sector: 0
Writing time: 3.773s
Average write speed 1.5x.
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 84.286s
cdrecord: fifo had 14 puts and 14 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
cdrecord: No write mode specified.
cdrecord: Asuming -tao mode.
cdrecord: Future versions of cdrecord may have different drive dependent
defaults.
cdrecord: Continuing in 5 seconds...
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.25
SCSI buffer size: 64512
Cdrecord-Clone 2.01a34 (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�rg
Schilling
NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord
and thus may have bugs that are not present in the original version.
Please send bug reports and support requests to <[EMAIL PROTECTED]>.
The original author should not be bothered with problems of this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnproof'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'QSI '
Identifikation : 'DVD/CDRW SBW-161'
Revision : 'SX09'
Device seems to be: Generic mmc2 DVD-ROM.
Current: 0x000A
Profile: 0x0010
Profile: 0x0008
Profile: 0x0009
Profile: 0x000A (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1605632 = 1568 KB
FIFO size : 4194304 = 4096 KB
---- snap
Here comes the log of the cdrecord commands:
---- snip
/usr/bin/mkisofs -V ARSONIMG -print-size -quiet -r -o
/tmp/kde-tedqpFdvu/arson-image1e39e0c3.fifo.iso
-graft-points /phto0006.jpg=/home/ted/photos/antje+nicolas/phto0006.jpg
/usr/bin/mkisofs -V NeueCD -V ARSONIMG -r -o
/tmp/kde-tedqpFdvu/arson-image1e39e0c3.fifo.iso
-graft-points /phto0006.jpg=/home/ted/photos/antje+nicolas/phto0006.jpg
/usr/bin/cdrecord -version
/usr/bin/cdrecord speed=4 dev=0,0,0 -v driveropts=burnproof tsize=420s -dummy
-data /tmp/kde-tedqpFdvu/
arson-image1e39e0c3.fifo.iso
/usr/bin/cdrecord -version
/usr/bin/cdrecord speed=4 dev=0,0,0 -v driveropts=burnproof tsize=420s -data
/tmp/kde-tedqpFdvu/
arson-image1e39e0c3.fifo.iso
---- snap
-- System Information:
Debian Release: 3.1
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.4.27hw38
Locale: LANG=de_DE, LC_CTYPE=de_DE
Versions of packages arson depends on:
ii cdda2wav 4:2.0+a34-2 Creates WAV files from audio CDs
ii cdrdao 1:1.1.9-3 Disk-At-Once (DAO) recording of au
ii kdelibs-data 4:3.3.2-1 KDE core shared data
ii kdelibs4 4:3.3.2-1 KDE core libraries
ii libart-2.0-2 2.3.16-6 Library of functions for 2D graphi
ii libc6 2.3.2.ds1-20 GNU C Library: Shared libraries an
ii libfam0c102 2.7.0-5 client library to control the FAM
ii libflac4 1.1.0-11 Free Lossless Audio Codec - runtim
ii libgcc1 1:3.4.1-4sarge1 GCC support library
ii libice6 4.3.0.dfsg.1-4 Inter-Client Exchange library
ii libogg0 1.1.0-1 Ogg Bitstream Library
ii libpng12-0 1.2.8rel-1 PNG library - runtime
ii libqt3c102-mt 3:3.3.3-7 Qt GUI Library (Threaded runtime v
ii libsm6 4.3.0.dfsg.1-4 X Window System Session Management
ii libstdc++5 1:3.3.5-5 The GNU Standard C++ Library v3
ii libvorbis0a 1.0.1-1 The Vorbis General Audio Compressi
ii libvorbisfile3 1.0.1-1 The Vorbis General Audio Compressi
ii libx11-6 4.3.0.dfsg.1-4 X Window System protocol client li
ii libxext6 4.3.0.dfsg.1-4 X Window System miscellaneous exte
ii libxrender1 0.8.3-7 X Rendering Extension client libra
ii xlibs 4.3.0.dfsg.1-4 X Window System client libraries m
-- no debconf information
--
==============================================================
Created with Sylpheed-Claws 0.9.12b
under Debian GNU LINUX 3.1 Sarge (testing).
http://counter.li.org/, Registered LinuxUser #311290
Spamfiltering by www.spamassassin.org
=============================================================
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
