Hi all! I bought a Dlink DGE-660TDE cardbus NIC not thinking that there might be any trouble with wired NICs and freebsd. It seems to be based on a fairly common ralink 8110 or 8169 (depending which tool you ask) and doesn't work on kfreebsd (-8 -9 and -10 with and without firmware enhancement):
re0: <RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet> port
0x9000-0x90ff mem 0xe4303000-0xe43031ff irq 16 at device 0.0 on cardbus0
re0: Chip rev. 0x10000000
re0: MAC rev. 0x00000000
re0: PHY write failed
re0: PHY write failed
re0: PHY read failed
re0: attaching PHYs failed
device_attach: re0 attach returned 6
lspci:
16:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit
Ethernet (rev 10)
Subsystem: D-Link System Inc Device 4301
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 9000
Region 1: Memory at e4303000 (32-bit, non-prefetchable)
Expansion ROM at cfdc0000 [disabled]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
pciconf -lv (freebsd chroot):
re0@pci0:22:0:0: class=0x020000 card=0x43011186 chip=0x816910ec rev=0x10
hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'Single Gigabit LOM Ethernet Controller (RTL8110)'
class = network
subclass = ethernet
Google turned some stuff up for combinations of chipset / errormessage
and freebsd. However most, if not all points to stuff that is said to at
least be fixed in 8/stable so I wouldn't expect any of these to turn up
on -9.
Anyone an idea for debugging this further?
Regards
Christoph
--
9FED 5C6C E206 B70A 5857 70CA 9655 22B9 D49A E731
Debian Developer | Lisp Hacker | CaCert Assurer
pgpK5I8WRVY7s.pgp
Description: PGP signature
