Hi,
Yes, fortunately I have some experience with FreeBSD and I had already
selected the iwi module when installing... but I am missing some
tools, like iwicontrol
Also, I don't have any idea where to copy the firmware, so that iwi finds it
iwi0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
inet6 fe80::216:6fff:fea4:62d7%iwi0 prefixlen 64 scopeid 0x7
inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
ether 0:16:6f:a4:62:d7
media: IEEE 802.11 Wireless Ethernet autoselect
status: no carrier
ssid "" channel 1
authmode OPEN privacy OFF txpowmax 100 protmode CTS
The radio transitter is on
# sysctl dev.iwi.0.radio
dev.iwi.0.radio: 1
I have put the firmware in /lib/firmware, because this is the way I'd
do it with debian (linux)
I have also noticed that installing gnome-utils yields a problem
E: gnome-utils: subprocess post-installation script returned error exit status 1
and iceweasel (nice to have that one in the repository!) is behaving a
bit odd... also, when I change the spacework and go from 1 to, say, 2,
the graphics is freezing for ~1-2 seconds
Ok, I know this is an alpha, but I just wanted to report...
So, my main question is: where to put the firmware, so that iwi finds
it (I don't have man iwi) and how to connect to a wep access point
Cheers,
Pau Amaro Seoane
2006/12/30, Petr Salinger <[EMAIL PROTECTED]>:
Hi.
> Now I wonder how to configure my wlan... in linux I would install
> ipw2200 and download the intel firmare (it's a centrino) per hand...
>
> Or should I go the freeBSD way? I mean iwi?
You can try "insmod if_iwi", as there is /lib/modules/6.1-1-686/if_iwi.ko
> Another important point... how to figure out which modules can I need?
> And for the ethernet card I just chose _all_ to be sure I have
> connection... but I guess this is not the elegant way...
For ethernet card you can try to deselect all as many ethernet cards are
builtin. Or check name(s) of current interface(s) by "ifconfig -a"
and leave only appropriate if_xxx.
> Is ACPI supported?
ls -l /lib/modules/6.1-1-686/*acpi*
Happy New Year to all.
Petr
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
