On Sunday 04 May 2008 23:01:16 Frans Pop wrote: > On Sunday 04 May 2008, Tito wrote: > > Good to know!!! > > One thing I can try is to grab some weekly build cdimage > > and start an install on the same system untill the partitioning > > step to see if i can reproduce it. > > You'd need a *daily* built image to get the changes! > > But any serious testing with those would be much appreciated. > > Cheers, > FJP >
Hi, i've investigated the issue a little more and found some results that make me think i did something wrong at raid array creation time as: 1) using the script in /usr/share/mdadm/mkconf (which uses mdadm --examine --scan --config=partitions) i get # definitions of existing MD arrays ARRAY /dev/md2 level=raid1 num-devices=2 UUID=95261952:6a58368f:9d4deba6:47ca997f ARRAY /dev/md0 level=raid1 num-devices=4 UUID=2928f68e:5d9adc5b:3fbebe5a:bce56b15 ARRAY /dev/md1 level=raid1 num-devices=2 UUID=e16b4bf9:f0dbce60:04894333:532a878b spares=2 ARRAY /dev/md1 level=raid5 num-devices=3 UUID=fd0b1c0e:f10deae6:11c6bfd4:055cd56a spares=1 2) while with mdadm --detail --scan i get: ARRAY /dev/md1 level=raid5 num-devices=3 spares=1 UUID=fd0b1c0e:f10deae6:11c6bfd4:055cd56a ARRAY /dev/md0 level=raid1 num-devices=4 UUID=2928f68e:5d9adc5b:3fbebe5a:bce56b15 ARRAY /dev/md2 level=raid1 num-devices=2 UUID=95261952:6a58368f:9d4deba6:47ca997f So seems that i did something stupid (forgot to delete an array?) that i don't know how to fix at the moment. :-( It seems to me that the installer uses method 1 rather than method 2, but i can't say if this is a good thing(TM) or not........ BTW: the arrays seem to work perfectly... Sorry, for the noise and thanks for your time and response, Ciao, Tito -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
