Package: installation-reports
Boot method: network Image version: http://people.debian.org/~dannf/d-i/images/daily/netboot/netboot.tar.gz Date: Thu Mar 13 11:17:05 EST 2008 I used the netboot install method for three different machines. For the RX6600 (8-core Montecito) everything worked fine (apart from the relatime bug that everyone knows about, and that you can't specify options to mkfs.xfs to tune it for bigger partitions: I just created a small root partition, and made the other partitions manually after installation was finished) For the RX2200 (two-core McKinley) the kernel hangs halfway through the boot; it appears to have done something dastardly to the console (I'm telnetting in through the management console ethernet adapter). The only way to restore console access for the next boot is to remove the power cable from the wall; resetting the machine and the BMC is not sufficient. The last thing on the console is: ----- 0000:e0:01.1: ttyS3 at MMIO 0xf4050000 (irq=51) is a 16550A Couldn't register serial port 0000:e0:01.1: -28 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize mice: PS/2 mouse device common for all mice TCP bic registered NET: Reg ------ For an i2000 (Merced), running on the VGA console, the initial splash screen looks awful ... it seems to have lots of weird characters that don't display on it. And the kernel seems to hang straight after elilo has loaded it. -- Dr Peter Chubb http://www.gelato.unsw.edu.au peterc AT gelato.unsw.edu.au http://www.ertos.nicta.com.au ERTOS within National ICT Australia -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
