reassign 466600 linux-2.6 thanks On Tuesday 19 February 2008, michael wrote: > Lenny installer does not mount the logical volume as presented by > HP/Compaq hardware RAID controller. It gives the following error message > > cpqarray: Finding drives on ida0 > cpqarray: ida0: idaSendPciCmd Timeout out, No command list address > returned! > cpqarray: error sending ID Controller
Basically this means that the kernel, or at least the cpqarray driver, does not correctly support your controller. There is nothing really we can do about that in the installer. I'm reassigning your report to the kernel team, but if you do not get a response from them an alternative way to get help for this may be to contact the linux-scsi kernel mailing list directly (at linux-scsi @ vger.kernel.org). Please make sure that you include the output of the commands 'lspci -nn' and 'dmesg' in your message. You can get those by switching to the debug shell on VT2 in the installer. If anythings comes out of that, please let us know the result. > It seems a similar issue happened with another installer some time ago. > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=380272 In that case the wrong driver was "claiming" support for the controller. Your issue could be similar, but could also be completely different. Cheers, FJP P.S. Feel free to ignore the reply from Geert Stappers. His reply was assuming that your error occurred when rebooting into the installed system, while I understand from your report that the failure is during hardware detection in the installer itself. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
