--- Begin Message ---
Package: installation-reports
Version: 2.29
Severity: minor
-- Package-specific info:
Boot method: network
Image version: http://www.slug-firmware.net debian-etch-rc2-20070308.zip
Date: 20070313
Machine: NSLU2
Partitions:
/dev/sda1 1 23100 185550749+ 8e Linux LVM
/dev/sda2 23101 23586 3903795 82 Linux swap / Solaris
/dev/sda3 * 23587 24321 5903887+ 83 Linux <- is root
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [O]
Configure network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [ ]
Install base system: [O]
Clock/timezone setup: [E]
User/password setup: [O]
Install tasks: [O]
Install boot loader: [O]
Overall install: [O]
Comments/Problems:
Due to low memory situation, the external USB disk was partitioned
and the root partition created on a "regular" machine. Thus the partioning
portion of the installer only needed to setup swap; the rest was not tested.
LVM was setup post-install.
The network install had to be done through a proxy service provided
over a local link. This meant that clock update via NTP was not possible.
Perhaps the network install should not assume that TIME can be setup
via NTP.
One difficulty with such installs is the lack of feedback from the machine while
it is installing. Perhaps there could be the option of offering a splitvt-based
monitoring of the install.
Overall, I was pleased and suprised at the ease of installation given the
limited
resources this machine has. Great work! I am really please with this slug which
is currently playing some music in the background!
Thanks and regards,
Kapil.
--
Please make sure that the hardware-summary log file, and any other
installation logs that you think would be useful are attached to this
report. Please compress large files using gzip.
Once you have filled out this report, mail it to [EMAIL PROTECTED]
==============================================
Installer lsb-release:
==============================================
DISTRIB_ID=Debian
DISTRIB_DESCRIPTION="Debian GNU/Linux installer"
DISTRIB_RELEASE="4.0 (installer build 20070308)"
X_INSTALLATION_MEDIUM=netboot
==============================================
Installer hardware-summary:
==============================================
umame -a: Linux LKG80FE41 2.6.18-4-ixp4xx #1 Thu Feb 22 14:00:55 UTC 2007
armv5tel unknown
lspci -nn: 00:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev
43)
lspci -nn: 00:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev
43)
lspci -nn: 00:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0]
(rev 04)
lspci -vnn: 00:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev
43) (prog-if 10)
lspci -vnn: Subsystem: NEC Corporation USB [1033:0035]
lspci -vnn: Flags: bus master, medium devsel, latency 8, IRQ 28
lspci -vnn: Memory at 48000000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [40] Power Management version 2
lspci -vnn:
lspci -vnn: 00:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev
43) (prog-if 10)
lspci -vnn: Subsystem: NEC Corporation USB [1033:0035]
lspci -vnn: Flags: bus master, medium devsel, latency 8, IRQ 27
lspci -vnn: Memory at 48001000 (32-bit, non-prefetchable) [size=4K]
lspci -vnn: Capabilities: [40] Power Management version 2
lspci -vnn:
lspci -vnn: 00:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0]
(rev 04) (prog-if 20)
lspci -vnn: Subsystem: NEC Corporation USB 2.0 [1033:00e0]
lspci -vnn: Flags: bus master, medium devsel, latency 68, IRQ 26
lspci -vnn: Memory at 48002000 (32-bit, non-prefetchable) [size=256]
lspci -vnn: Capabilities: [40] Power Management version 2
lspci -vnn:
modulemap: 1033:0035 ohci_hcd
modulemap: 1033:0035 ohci_hcd
modulemap: 1033:00e0 ehci_hcd
lsmod: Module Size Used by
lsmod: reiserfs 269556 0
lsmod: ext3 137704 1
lsmod: jbd 59368 1 ext3
lsmod: mbcache 9188 1 ext3
lsmod: vfat 13152 0
lsmod: fat 53660 1 vfat
lsmod: sd_mod 19248 3
lsmod: usb_storage 77707 2
lsmod: scsi_mod 102800 2 sd_mod,usb_storage
lsmod: ixp4xx_mac 19316 0
lsmod: evdev 10208 0
lsmod: ixp4xx_qmgr 8396 5 ixp4xx_mac
lsmod: ixp4xx_npe 14080 2 ixp4xx_mac
lsmod: firmware_class 10400 1 ixp4xx_npe
lsmod: ixp4xx_beeper 3392 0
lsmod: ehci_hcd 31016 0
lsmod: ohci_hcd 16932 0
lsmod: usbcore 126248 4 usb_storage,ehci_hcd,ohci_hcd
df: Filesystem 1k-blocks Used Available Use% Mounted on
df: tmpfs 14992 388 14604 3% /dev
df: tmpfs 14992 388 14604 3% /dev
df: tmpfs 14992 388 14604 3% /.dev
df: /dev/scsi/host0/bus0/target0/lun0/part3 5811084 529188 4986704 10%
/target
free: total used free shared buffers
free: Mem: 29988 26316 3672 0 640
free: Swap: 3903784 4424 3899360
free: Total: 3933772 30740 3903032
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 48: pccardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 49: pccardctl: not found
cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found
cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found
/proc/cpuinfo: Processor : XScale-IXP42x Family rev 1 (v5l)
/proc/cpuinfo: BogoMIPS : 132.71
/proc/cpuinfo: Features : swp half fastmult edsp
/proc/cpuinfo: CPU implementer : 0x69
/proc/cpuinfo: CPU architecture: 5TE
/proc/cpuinfo: CPU variant : 0x0
/proc/cpuinfo: CPU part : 0x41f
/proc/cpuinfo: CPU revision : 1
/proc/cpuinfo: Cache type : undefined 5
/proc/cpuinfo: Cache clean : undefined 5
/proc/cpuinfo: Cache lockdown : undefined 5
/proc/cpuinfo: Cache format : Harvard
/proc/cpuinfo: I size : 32768
/proc/cpuinfo: I assoc : 32
/proc/cpuinfo: I line length : 32
/proc/cpuinfo: I sets : 32
/proc/cpuinfo: D size : 32768
/proc/cpuinfo: D assoc : 32
/proc/cpuinfo: D line length : 32
/proc/cpuinfo: D sets : 32
/proc/cpuinfo:
/proc/cpuinfo: Hardware : Linksys NSLU2
/proc/cpuinfo: Revision : 0000
/proc/cpuinfo: Serial : 0000000000000000
/proc/ioports: 00000000-0000ffff : PCI I/O Space
/proc/iomem: 00000000-01ffffff : System RAM
/proc/iomem: 0001f000-0020636f : Kernel text
/proc/iomem: 00208000-002842a7 : Kernel data
/proc/iomem: 48000000-4bffffff : PCI Memory Space
/proc/iomem: 48000000-48000fff : 0000:00:01.0
/proc/iomem: 48000000-48000fff : ohci_hcd
/proc/iomem: 48001000-48001fff : 0000:00:01.1
/proc/iomem: 48001000-48001fff : ohci_hcd
/proc/iomem: 48002000-480020ff : 0000:00:01.2
/proc/iomem: 48002000-480020ff : ehci_hcd
/proc/iomem: 50000000-50ffffff : IXP4XX-Flash.0
/proc/iomem: 50000000-50ffffff : IXP4XXFlash
/proc/iomem: 60000000-60003fff : ixp4xx_qmgr.0
/proc/iomem: 60000000-60003fff : ixp_qmgr
/proc/iomem: c8000000-c8000fff : serial8250.0
/proc/iomem: c8000000-c800001f : serial
/proc/iomem: c8001000-c8001fff : serial8250.0
/proc/iomem: c8001000-c800101f : serial
/proc/iomem: c8007000-c8007fff : ixp4xx_npe.1
/proc/iomem: c8007000-c8007fff : NPE-B
/proc/iomem: c8008000-c8008fff : ixp4xx_npe.2
/proc/iomem: c8008000-c8008fff : NPE-C
/proc/iomem: c8009000-c80091ff : ixp4xx_mac.0
/proc/iomem: c8009000-c80091ff : ixp4xx_mac
/proc/interrupts: CPU0
/proc/interrupts: 3: 95107 - qmgr
/proc/interrupts: 5: 649716 - IXP4xx Timer Tick
/proc/interrupts: 11: 1343 - ixp4xx-beeper
/proc/interrupts: 15: 924 - serial
/proc/interrupts: 22: 0 - NSLU2 power button
/proc/interrupts: 26: 1019467 - ehci_hcd:usb3
/proc/interrupts: 27: 0 - ohci_hcd:usb2
/proc/interrupts: 28: 0 - ohci_hcd:usb1
/proc/interrupts: 29: 0 - NSLU2 reset button
/proc/interrupts: Err: 0
/proc/meminfo: MemTotal: 29988 kB
/proc/meminfo: MemFree: 3516 kB
/proc/meminfo: Buffers: 640 kB
/proc/meminfo: Cached: 16172 kB
/proc/meminfo: SwapCached: 1720 kB
/proc/meminfo: Active: 12732 kB
/proc/meminfo: Inactive: 6384 kB
/proc/meminfo: HighTotal: 0 kB
/proc/meminfo: HighFree: 0 kB
/proc/meminfo: LowTotal: 29988 kB
/proc/meminfo: LowFree: 3516 kB
/proc/meminfo: SwapTotal: 3903784 kB
/proc/meminfo: SwapFree: 3899360 kB
/proc/meminfo: Dirty: 272 kB
/proc/meminfo: Writeback: 0 kB
/proc/meminfo: AnonPages: 2036 kB
/proc/meminfo: Mapped: 1496 kB
/proc/meminfo: Slab: 2828 kB
/proc/meminfo: PageTables: 308 kB
/proc/meminfo: NFS_Unstable: 0 kB
/proc/meminfo: Bounce: 0 kB
/proc/meminfo: CommitLimit: 3918776 kB
/proc/meminfo: Committed_AS: 10180 kB
/proc/meminfo: VmallocTotal: 991232 kB
/proc/meminfo: VmallocUsed: 18744 kB
/proc/meminfo: VmallocChunk: 966652 kB
/proc/bus/input/devices: I: Bus=0019 Vendor=001f Product=0001 Version=0100
/proc/bus/input/devices: N: Name="ixp4xx beeper"
/proc/bus/input/devices: P: Phys=ixp4xx/gpio
/proc/bus/input/devices: S: Sysfs=/class/input/input0
/proc/bus/input/devices: H: Handlers=kbd event0
/proc/bus/input/devices: B: EV=40001
/proc/bus/input/devices: B: SND=6
/proc/bus/input/devices:
dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 57: dmidecode: not found
==============================================
Installer status:
==============================================
Package: preseed-common
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, di-utils (>= 1.14)
Description: common files for preseeding
Package: udpkg
Status: install ok unpacked
Version: 1.04
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.41)
Description: tiny dpkg clone
Package: oldsys-preseed
Status: install ok unpacked
Version: 1.3
Depends: devio-udeb
Description: Preseed debian-installer from an existing device
Package: libnss-dns-udeb
Status: install ok unpacked
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for DNS - udeb
Package: download-installer
Status: install ok installed
Version: 1.15
Depends: cdebconf-udeb, net-retriever, anna (>= 1.07)
Description: Download installer components
Installer-Menu-Item: 23
Package: lowmemcheck
Status: install ok unpacked
Version: 1.25
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03)
Description: detect low-memory systems and enter lowmem mode
Package: input-modules-2.6.18-4-ixp4xx-di
Status: install ok unpacked
Version: 1.10
Provides: input-modules
Depends: kernel-image-2.6.18-4-ixp4xx-di, usb-modules-2.6.18-4-ixp4xx-di
Description: Input devices support
Package: main-menu
Status: install ok unpacked
Version: 1.18
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb
(>= 0.50), cdebconf-udeb
Description: Debian installer main menu
Package: di-utils-shell
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb, di-utils (>= 1.18)
Description: Execute a shell
Installer-Menu-Item: 950
Package: di-utils
Status: install ok installed
Version: 1.45
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49), cdebconf-udeb
Description: Miscellaneous utilities for the debian installer
Package: choose-mirror
Status: install ok installed
Version: 2.13
Depends: configured-network, choose-mirror-bin
Description: Choose mirror to install from (menu item)
Installer-Menu-Item: 23
Package: network-preseed
Status: install ok unpacked
Version: 1.28
Depends: cdebconf-udeb, configured-network, preseed-common
Description: download debconf preseed file
Installer-Menu-Item: 21
Package: cdebconf-newt-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.3.5-1), libnewt0.52
Description: Newt frontend for Debian Configuration Management System
Package: usb-modules-2.6.18-4-ixp4xx-di
Status: install ok unpacked
Version: 1.10
Provides: usb-modules
Depends: kernel-image-2.6.18-4-ixp4xx-di
Description: USB support
Package: module-init-tools-udeb
Status: install ok unpacked
Version: 3.3-pre4-2
Depends: libc6 (>= 2.3.5-1)
Description: tools for managing Linux kernel modules
Package: gpgv-udeb
Status: install ok installed
Version: 1.4.6-1
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: minimal signature verification tool
Package: rootskel
Status: install ok installed
Version: 1.50
Depends: di-utils (>= 1.43), cdebconf-udeb
Description: Skeleton root filesystem used by debian-installer
Package: openssh-server-udeb
Status: install ok installed
Version: 1:4.3p2-9
Depends: libc6 (>= 2.3.5-1), libcrypto0.9.8-udeb (>= 0.9.8c-1), zlib1g-udeb (>=
1:1.2.1), libnss-files-udeb
Description: Secure shell server for the Debian installer
Package: network-console
Status: install ok unpacked
Version: 1.11
Depends: cdebconf-udeb, configured-network, openssh-server-udeb (>= 1:3.8p1-1)
Description: Continue installation remotely using SSH
Installer-Menu-Item: 21
Package: udev-udeb
Status: install ok unpacked
Version: 0.105-3
Depends: libc6 (>= 2.3.5-1)
Description: /dev/ and hotplug management daemon
Package: libnss-files-udeb
Status: install ok installed
Version: 2.3.6.ds1-13
Description: GNU C Library: NSS helper for files - udeb
Package: libcrypto0.9.8-udeb
Status: install ok installed
Version: 0.9.8c-4
Provides: libssl0.9.8
Depends: libc6 (>= 2.3.5-1), zlib1g-udeb (>= 1:1.2.1)
Description: crypto shared library - udeb
Package: libfribidi0-udeb
Status: install ok unpacked
Version: 0.10.7-4
Depends: libc6 (>= 2.3.5-1)
Description: Free Implementation of the Unicode BiDi algorithm
Package: libtextwrap1-udeb
Status: install ok installed
Version: 0.1-5
Depends: libc6 (>= 2.3.5-1)
Description: text-wrapping library with i18n - runtime udeb
Package: auto-install
Status: install ok unpacked
Version: 0.03
Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18)
Description: Support for automatic installs
Installer-Menu-Item: 19
Package: usb-discover
Status: install ok unpacked
Version: 1.06
Depends: cdebconf-udeb
Description: Discover USB and load kernel modules
Package: rescue-check
Status: install ok unpacked
Version: 1.9
Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03), di-utils (>= 1.18)
Description: enter d-i rescue mode if requested
Package: nano-udeb
Status: install ok unpacked
Version: 2.0.2-1
Provides: editor
Depends: libc6 (>= 2.3.5-1), libslang2-udeb (>= 2.0.6-3)
Description: free Pico clone with some new features - tiny build
Package: cdebconf-udeb
Status: install ok installed
Version: 0.114
Provides: debconf-2.0
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.50),
libtextwrap1-udeb
Description: Debian Configuration Management System (C-implementation)
Package: ai-choosers
Status: install ok unpacked
Version: 0.03
Depends: kbd-chooser (>= 1.30), localechooser (>= 1.23)
Description: Delayed configuration of locale and keyboard for auto-install
Installer-Menu-Item: 22
Package: libiw28-udeb
Status: install ok installed
Version: 28-1
Depends: libc6 (>= 2.3.5-1)
Description: Tools for manipulating Linux Wireless Extensions
Package: cdebconf-text-udeb
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb, libc6 (>= 2.3.5-1)
Description: Plain text frontend for Debian Configuration Management System
Package: iso-3166-udeb
Status: install ok installed
Version: 1.0a-1
Description: provides iso_3166.tab file
Package: ethdetect
Status: install ok installed
Version: 1.50
Provides: ethernet-card-detection
Depends: rootskel (>= 1.30), cdebconf-udeb (>= 0.38), hw-detect, di-utils (>=
1.13)
Description: Detect network hardware and load kernel drivers for it
Installer-Menu-Item: 17
Package: devio-udeb
Status: install ok unpacked
Version: 1.2-1
Depends: libc6 (>= 2.3.5-1)
Description: correctly read (or write) a region of a block device
Package: busybox-udeb
Status: install ok unpacked
Version: 1:1.1.3-4
Depends: libc6 (>= 2.3.5-1)
Description: Tiny utilities for the debian-installer
Package: initrd-preseed
Status: install ok unpacked
Version: 1.28
Depends: preseed-common
Description: load debconf preseed file from /preseed.cfg on the initrd
Package: nic-modules-2.6.18-4-ixp4xx-di
Status: install ok unpacked
Version: 1.10
Provides: nic-modules
Depends: kernel-image-2.6.18-4-ixp4xx-di
Description: Common NIC drivers
Package: net-retriever
Status: install ok installed
Version: 1.15
Provides: retriever
Depends: cdebconf-udeb, choose-mirror, configured-network, di-utils (>= 1.16),
gpgv-udeb
Description: Fetch modules from the Internet
Package: archdetect
Status: install ok installed
Version: 1.50
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.50)
Description: Hardware architecture detector
Package: beep-udeb
Status: install ok unpacked
Version: 1.2.2-19
Depends: libc6 (>= 2.3.5-1)
Description: advanced pc-speaker beeper
Package: save-logs
Status: install ok unpacked
Version: 2.29
Depends: cdebconf-udeb
Description: save logs and configuration for debug purposes
Installer-Menu-Item: 940
Package: di-utils-reboot
Status: install ok unpacked
Version: 1.45
Depends: cdebconf-udeb
Description: Reboot
Installer-Menu-Item: 995
Package: anna
Status: install ok installed
Version: 1.27
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb
(>= 0.50), cdebconf-udeb
Description: anna's not nearly apt, but for the Debian installer, it will do
Package: choose-mirror-bin
Status: install ok installed
Version: 2.13
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb
(>= 0.50), cdebconf-udeb
Description: Choose mirror to install from (program)
Package: pciutils-udeb
Status: install ok unpacked
Version: 1:2.2.4~pre4-1
Depends: libc6 (>= 2.3.5-1)
Description: Linux PCI Utilities (udeb)
Package: console-keymaps-at
Status: install ok installed
Version: 2:1.01-7
Provides: console-keymaps
Depends: cdebconf-udeb
Description: Keymaps for PC-style (PS/2 and AT) keyboards
Package: di-utils-terminfo
Status: install ok unpacked
Version: 1.45
Description: Terminfo entries needed by newt/slang in debian installer
Package: hw-detect
Status: install ok installed
Version: 1.50
Depends: rootskel (>= 1.30), archdetect, cdebconf-udeb (>= 0.75), di-utils (>=
1.26)
Description: Detect hardware and load kernel drivers for it
Package: kbd-chooser
Status: install ok installed
Version: 1.34
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb
(>= 0.50), cdebconf-udeb, console-keymaps
Description: Detect a keyboard and select layout
Installer-Menu-Item: 12
Package: libdebian-installer4-udeb
Status: install ok installed
Version: 0.50
Depends: libc6 (>= 2.3.5-1)
Description: Library of common debian-installer functions
Package: installation-locale
Status: install ok unpacked
Version: 1.1
Depends: rootskel
Description: UTF-8 C locale
Package: kernel-image-2.6.18-4-ixp4xx-di
Status: install ok unpacked
Version: 1.10
Provides: kernel-image, socket-modules
Description: Linux kernel binary image for the Debian installer
Package: nic-usb-modules-2.6.18-4-ixp4xx-di
Status: install ok unpacked
Version: 1.10
Provides: nic-usb-modules
Depends: kernel-image-2.6.18-4-ixp4xx-di, usb-modules-2.6.18-4-ixp4xx-di
Description: USB NIC drivers
Package: env-preseed
Status: install ok unpacked
Version: 1.28
Description: debconf preseeding via environment variables
Package: cdebconf-priority
Status: install ok unpacked
Version: 0.114
Depends: cdebconf-udeb
Description: Change debconf priority
Installer-Menu-Item: 930
Package: netcfg
Status: install ok installed
Version: 1.36
Provides: configured-network
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb
(>= 0.50), libiw28-udeb (>= 28), dhcp-client-udeb | dhcp3-client-udeb |
pump-udeb, ethernet-card-detection
Description: Configure the network
Installer-Menu-Item: 18
Package: zlib1g-udeb
Status: install ok installed
Version: 1:1.2.3-13
Provides: zlib1g
Description: compression library - runtime for Debian installer
Package: dhcp-client-udeb
Status: install ok installed
Version: 2.0pl5-19.5
Depends: libc6 (>= 2.3.5-1)
Description: DHCP Client for debian-installer
Package: libdebconfclient0-udeb
Status: install ok installed
Version: 0.114
Depends: libc6 (>= 2.3.5-1), cdebconf-udeb
Description: Debian Configuration Management System (C-implementation)
Package: bogl-bterm-udeb
Status: install ok unpacked
Version: 0.1.18-1.5
Provides: editor
Depends: libc-udeb
Description: Ben's Own Graphics Library - graphical terminal
Package: debian-installer
Status: install ok installed
Version: ixp4xx-netboot-20070308
Description: debian installation image
Package: acorn-fdisk-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 68
Maintainer: Philip Blundell <[EMAIL PROTECTED]>
Version: 3.0.6-6.1
Depends: libc6 (>= 2.3.5-1)
Description: Partition a hard drive (manual)
fdisk package
Package: apt-mirror-setup
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 160
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: choose-mirror-bin, cdebconf-udeb
Description: set up a mirror in sources.list
Package: apt-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 104
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.20
Depends: apt-mirror-setup, base-installer (>= 1.49), cdebconf-udeb
Description: Configure apt
Installer-Menu-Item: 70
Package: base-installer
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 632
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.75
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb
(>= 0.49), mounted-partitions, debootstrap-udeb (>= 0.3.1), created-fstab,
archdetect, di-utils-mapdevfs, di-utils (>= 1.16), rootskel (>= 1.19), gpgv-udeb
Provides: kernel-installer
Description: Install the base system
Installer-Menu-Item: 65
Package: clock-setup
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 76
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.14
Depends: cdebconf-udeb, os-prober, tzsetup-udeb
Description: set up clock
Installer-Menu-Item: 62
Package: debootstrap-udeb
Status: install ok installed
Priority: required
Section: debian-installer
Installed-Size: 128
Maintainer: Anthony Towns <[EMAIL PROTECTED]>
Version: 0.3.3.2
Depends: libc6 (>= 2.3.5-1), mounted-partitions
Description: Bootstrap the Debian system
debootstrap is used to create a Debian base system from scratch,
without requiring the availability of dpkg or apt. It does this by
downloading .deb files from a mirror site, and carefully unpacking them
into a directory which can eventually be chrooted into.
.
debootstrap-udeb is a minimal package used by debian-installer.
Package: di-utils-mapdevfs
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 16
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.45
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.49)
Description: mapdevfs utility for the debian installer
Package: disk-detect
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 64
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.50
Depends: cdebconf-udeb (>= 0.38), hw-detect, di-utils (>= 1.13)
Provides: harddrive-detection
Description: Detect disk drives
Installer-Menu-Item: 35
Package: e2fsprogs-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 392
Maintainer: Theodore Y. Ts'o <[EMAIL PROTECTED]>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libblkid1-udeb, libc6 (>= 2.3.5-1)
Description: stripped-down versions of e2fsprogs, for debian-installer
This package is an e2fsprogs package built for a reduced size, so that
it can help to save space in debian-installer.
.
Don't attempt to install this package, it has no support for a couple of
features you surely want. Anyway it should refuse to install.
Package: ext3-modules-2.6.18-4-ixp4xx-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 284
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.18-4-ixp4xx-di
Provides: ext3-modules
Description: EXT3 filesystem support
This package contains the EXT3 filesystem module for the Linux kernel.
Package: fat-modules-2.6.18-4-ixp4xx-di
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 140
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.18-4-ixp4xx-di
Provides: fat-modules
Description: FAT filesystem support
This package contains the FAT and VFAT filesystem modules for the Linux kernel.
Package: finish-install
Status: install ok unpacked
Priority: required
Section: debian-installer
Installed-Size: 108
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 2.9
Depends: cdebconf-udeb, archdetect, base-installer, created-fstab,
bootable-system
Provides: prebaseconfig
Description: Finish the installation and reboot
Installer-Menu-Item: 78
Package: flash-kernel-installer
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 36
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.1
Depends: cdebconf-udeb, base-installer
Provides: bootable-system
Description: Configure flash to boot the system
Installer-Menu-Item: 73
Package: libblkid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 40
Maintainer: Theodore Y. Ts'o <[EMAIL PROTECTED]>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.5-1)
Provides: libblkid1
Description: block device id library
The blkid library which allows system programs like fsck and
mount to quickly and easily find block devices by filesystem UUID and
LABEL. This allows system administrators to avoid specifiying
filesystems by hard-coded device names, but via a logical naming
system instead.
.
This is a minimal package for debian-installer.
Package: libc6-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 1836
Maintainer: GNU Libc Maintainers <[EMAIL PROTECTED]>
Version: 2.3.6.ds1-13
Provides: libc6, libc-udeb, glibc-2.3.6.ds1-1, glibc-2.3.6-2
Description: GNU C Library: Shared libraries - udeb
Contains the standard libraries that are used by nearly all programs on
the system. This package includes shared versions of the standard C library
and the standard math library, as well as many others.
.
This package contains a minimal set of libraries needed for the Debian
installer. Do not install it on a normal system.
Package: libparted1.7-udeb
Status: install ok installed
Priority: extra
Section: debian-installer
Installed-Size: 356
Maintainer: Parted Maintainer Team <[EMAIL PROTECTED]>
Version: 1.7.1-5.1
Depends: libc6 (>= 2.3.5-1), libuuid1-udeb
Provides: libparted1.7-1
Description: The GNU Parted disk partitioning shared library
GNU Parted is a program that allows you to create, destroy,
resize, move and copy hard disk partitions. This is useful
for creating space for new operating systems, reorganising
disk usage, and copying data to new hard disks. This package
contains the Parted binary and manual page.
.
This package contains libparted, the required shared library
used by Parted. This is a cut-down package with no normal
documentation intended to be used in debian-installer.
.
Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and
PC98 disklabels/partition tables, as well as a 'loop' (raw
disk) type which allows use on RAID/LVM. Filesystems which
are currently fully supported are ext2, ext3, fat (FAT16
and FAT32), ReiserFS (with libreiserfs) and linux-swap.
Parted can also detect and remove HFS (Mac OS), JFS, NTFS,
UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems,
but cannot create, resize or check these filesystems yet.
.
Note that ReiserFS support is only enabled if you install
the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been
removed from sarge, ReiserFS support is not compiled in the
default package.
.
The nature of this software means that any bugs could cause
massive data loss. While there are no known bugs at the moment,
they could exist, so please back up all important files before
running it, and do so at your own risk.
Package: libuuid1-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 24
Maintainer: Theodore Y. Ts'o <[EMAIL PROTECTED]>
Version: 1.39+1.40-WIP-2006.11.14+dfsg-2
Depends: libc6 (>= 2.3.5-1)
Provides: libuuid1
Description: universally unique id library
libuuid generates and parses 128-bit universally unique id's (UUID's).
See RFC 4122 for more information.
.
This is a minimal package for debian-installer.
Package: localechooser
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 416
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.37
Depends: cdebconf-udeb, iso-3166-udeb, di-utils (>= 1.15)
Description: choose language/country/locale
Installer-Menu-Item: 10
Package: lowmem
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.25
Description: free memory for lowmem install
Installer-Menu-Item: 25
Package: nobootloader
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 168
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: cdebconf-udeb, base-installer (>= 1.23), di-utils-mapdevfs
Provides: bootable-system
Description: Don't install any bootloader.
This package will skip installing a boot-loader
Installer-Menu-Item: 77
Package: os-prober-udeb
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 33
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.17
Depends: di-utils-mapdevfs, anna (>= 1.16)
Provides: os-prober
Description: utility to detect other OSes on a set of drives
This package is to be used by boot loader installers to detect other OSes
available on a system, in a generic format, which it can then adapt to its
own configuration format.
Package: partconf
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 332
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb
(>= 0.50), libparted1.7-udeb (>= 1.7.1-1), partconf-mkfstab
Recommends: partitioned-harddrives
Provides: made-filesystems, made-swapspace, mounted-partitions, created-fstab
Description: Configure and Mount Partitions
User friendly debian-installer program for creating file systems,
swap partitions and mounting them in /target
Installer-Menu-Item: 45
Package: partconf-mkfstab
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 56
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.21
Depends: libc6 (>= 2.3.5-1), libdebian-installer4-udeb (>= 0.50),
libparted1.7-udeb (>= 1.7.1-1)
Description: debian-installer utility for creating fstab file
Helper program for creating fstab files in the new installed debian
system.
Package: partitioner
Status: install ok unpacked
Priority: standard
Section: debian-installer
Installed-Size: 92
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.39
Depends: libc6 (>= 2.3.5-1), libdebconfclient0-udeb, libdebian-installer4-udeb
(>= 0.49), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb, harddrive-detection,
acorn-fdisk-udeb
Provides: partitioned-harddrives
Description: Partition a hard drive
Use this module to partition the physical disks in the system.
Installer-Menu-Item: 43
Package: partman-auto
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 424
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 68
Depends: cdebconf-udeb, di-utils, partman-base (>= 99),
partman-basicfilesystems, partman-ext3
Description: Automatically partition storage devices (partman)
Package: partman-base
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 876
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 105
Depends: libc6 (>= 2.3.5-1), libparted1.7-udeb (>= 1.7.1-1), cdebconf-udeb,
partman-partitioning, partman-target, archdetect, harddrive-detection,
di-utils-mapdevfs, di-utils (>= 1.15)
Provides: made-filesystems, mounted-partitions, partitioned-harddrives,
created-fstab
Description: Partition the storage devices (partman)
Installer-Menu-Item: 42
Package: partman-basicfilesystems
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 600
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 52
Depends: cdebconf-udeb, e2fsprogs-udeb, ext2-modules, fat-modules, di-utils (>=
1.14)
Provides: partman-filesystem
Description: Add to partman support for ext2, linux-swap, fat16 and fat32
Package: partman-basicmethods
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 132
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 34
Depends: cdebconf-udeb
Provides: partman-method
Description: Basic partition usage methods for partman
This package provides partman with two methods to use partitions.
The first is to format the partition. The second is to keep and use
the existing data in the partition as it is.
Package: partman-ext3
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 228
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 46
Depends: cdebconf-udeb, e2fsprogs-udeb, ext3-modules, partman-basicfilesystems,
di-utils (>= 1.14)
Provides: partman-filesystem
Description: Add to partman support for ext3
Package: partman-partitioning
Status: install ok installed
Priority: optional
Section: debian-installer
Installed-Size: 380
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 47
Depends: cdebconf-udeb
Description: Partitioning operations for partman
This udeb provides partman with editing operations for creation
of new partitions, deletion of partitions and initialisation of the
partition table.
Package: partman-target
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 320
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 48
Depends: cdebconf-udeb, partman-basicfilesystems, partman-basicmethods,
di-utils-mapdevfs
Description: Provides partman with ability to prepare /target
This udeb allows the user to choose how partitions should be used.
Package: pkgsel
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 32
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 0.12
Depends: cdebconf-udeb, apt-setup-udeb, di-utils (>= 1.20)
Description: Select and install packages
Installer-Menu-Item: 70
Package: scsi-core-modules-2.6.18-4-ixp4xx-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 184
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.18-4-ixp4xx-di
Provides: scsi-core-modules
Description: Core SCSI subsystem
This package contains the core SCSI subsystem for the Linux kernel.
Package: tzsetup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1:0.16
Depends: cdebconf-udeb, localechooser
Description: choose timezone
Installer-Menu-Item: 62
Package: usb-storage-modules-2.6.18-4-ixp4xx-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 136
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: scsi-core-modules-2.6.18-4-ixp4xx-di, usb-modules-2.6.18-4-ixp4xx-di
Provides: usb-storage-modules
Description: USB storage support
This package contains the USB storage driver for the Linux kernel.
Package: user-setup-udeb
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 360
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.11
Depends: cdebconf-udeb
Description: Set up users and passwords
Installer-Menu-Item: 63
Package: reiserfs-modules-2.6.18-4-ixp4xx-di
Status: install ok installed
Priority: standard
Section: debian-installer
Installed-Size: 328
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Version: 1.10
Depends: kernel-image-2.6.18-4-ixp4xx-di
Provides: reiserfs-modules
Description: Reiser filesystem support
This package contains the Reiser filesystem module for the Linux kernel.
-- System Information:
Debian Release: 4.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: arm (armv5tel)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-ixp4xx
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
installation-report depends on no packages.
Versions of packages installation-report recommends:
ii pciutils 1:2.2.4~pre4-1 Linux PCI Utilities
ii reportbug 3.31 reports bugs in the Debian distrib
-- no debconf information
--- End Message ---
