Package: installation-reports Boot method: <How did you boot the installer? Downloaded and burned DVDs from .iso images.> Image version: <2/16/07 Etch AMD64 snapshot from cdimage.debian.org> Date: <2/18/07 evening>
Machine: <User-built workstation; Tyan S2885 motherboard, 3ware 9550SX RAID controller, MSI RX-9250 AGP graphics, and Rosewill (ViA chipset) USB 2.0 PCI add-on card.> Processor: 2 x AMD Opteron 275. Memory: 16 GB DDR-400 with registered with ECC (running 3-3-3-8!) Partitions: <1 GB ext3 in /boot; 26 GB swap; 580 GB XFS; on 4 Seagate 320 GB SATA drives in RAID 10.> Output of lspci and lspci -n: 00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) 00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) 00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) 00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02) 00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05) 00:07.5 Multimedia audio controller: Advanced Micro Devices [AMD] AMD-8111 AC97 Audio (rev 03) 00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13) 00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13) 00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 01:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 01:0a.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) 01:0a.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) 01:0a.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63) 01:0b.0 Mass storage controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) 01:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) 02:09.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev 02) 03:06.0 RAID bus controller: 3ware Inc 9550SX SATA-RAID 04:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-8151 System Controller (rev 14) 04:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8151 AGP Bridge (rev 14) 05:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01) 05:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (Secondary) (rev 01) 00:06.0 0604: 1022:7460 (rev 07) 00:07.0 0601: 1022:7468 (rev 05) 00:07.1 0101: 1022:7469 (rev 03) 00:07.2 0c05: 1022:746a (rev 02) 00:07.3 0680: 1022:746b (rev 05) 00:07.5 0401: 1022:746d (rev 03) 00:0a.0 0604: 1022:7450 (rev 13) 00:0a.1 0800: 1022:7451 (rev 01) 00:0b.0 0604: 1022:7450 (rev 13) 00:0b.1 0800: 1022:7451 (rev 01) 00:18.0 0600: 1022:1100 00:18.1 0600: 1022:1101 00:18.2 0600: 1022:1102 00:18.3 0600: 1022:1103 00:19.0 0600: 1022:1100 00:19.1 0600: 1022:1101 00:19.2 0600: 1022:1102 00:19.3 0600: 1022:1103 01:00.0 0c03: 1022:7464 (rev 0b) 01:00.1 0c03: 1022:7464 (rev 0b) 01:0a.0 0c03: 1106:3038 (rev 61) 01:0a.1 0c03: 1106:3038 (rev 61) 01:0a.2 0c03: 1106:3104 (rev 63) 01:0b.0 0180: 1095:3114 (rev 02) 01:0c.0 0c00: 104c:8023 02:09.0 0200: 14e4:16a7 (rev 02) 03:06.0 0104: 13c1:1003 04:00.0 0600: 1022:7454 (rev 14) 04:01.0 0604: 1022:7455 (rev 14) 05:00.0 0300: 1002:5960 (rev 01) 05:00.1 0380: 1002:5940 (rev 01) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: PS/2 mouse (MS Wheel Mouse Optical) not working when a Belkin OmniView E Series KVM is present. Works when directly plugged in... odd... On the plus side, a Microsoft Wireless Notebook mouse was detected, configured, and worked after a hot-plug on a USB port! Good save! <Pre-installation search on 3ware performance issues led me to use XFS for the / partition. I also noted that the installer wanted to install LILO, citing compatibility issues with Grub. However, since a lot of folks wind up building and installing a kernel at some point, Grub is a better fit. So for those who install wishing to use XFS on a single partition, I suggest instead that the installer suggest a small /boot partition in ext3 (eliminating the Grub-XFS issues), with the rest of the installation in XFS. That's what I ended up doing.> -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
