Package: discover1-data
Version: 2.2006.12.28
I've just installed etch on a brand new Xeon system with a nVidia Quadro
FX 3500 graphics card, and the X server configured itself to use the
"vesa" driver, while this card is perfectly supported by the "nv"
driver.
Here is the lspci output for this device:
07:00.0 VGA compatible controller: nVidia Corporation Quadro FX 3500 (rev a1)
(prog-if 00 [VGA])
Subsystem: nVidia Corporation Unknown device 032b
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at de000000 (64-bit, non-prefetchable) [size=16M]
I/O ports at dc80 [size=128]
Expansion ROM at dfb00000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
Capabilities: [78] Express Endpoint IRQ 0
Capabilities: [100] Virtual Channel
Capabilities: [128] Power Budgeting
lspci -n output:
00:07.0 0604: 8086:25e7 (rev 12)
Cheers,
--
.''`.
: :' : We are debian.org. Lower your prices, surrender your code.
`. `' We will add your hardware and software distinctiveness to
`- our own. Resistance is futile.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
