Your message dated Tue, 26 Dec 2006 19:39:39 +0100
with message-id <[EMAIL PROTECTED]>
and subject line Bug#404437: installation-reports
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: installation-reports
Debian-installer-version: 12/22/06
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso
uname -a: Linux spade 2.6.18-3-amd64 #1 SMP Sun Dec 10
19:57:44 CET 2006 x86_64 GNU/Linux
Date: 12/22/06
Method: netist CD, used ftp.debian.org to download
needed pakages
Machine:IBM Thinkpad T60
Processor: Core 2 Duo 2.0 GHz
Memory: 1024 MB
Root Device: SATA
Root Size/partition table: Disk /dev/sda: 100.0 GB,
100030242816 bytes
255 heads, 63 sectors/track, 12161 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id
System
/dev/sda1 * 1 2550 20482843+ 7
HPFS/NTFS
/dev/sda2 11572 12161 4732560 12
Compaq diagnostics
Partition 2 does not end on cylinder boundary.
/dev/sda3 2551 2562 96390 83
Linux
/dev/sda4 2563 11571 72364792+ 5
Extended
/dev/sda5 2563 11199 69376671 83
Linux
/dev/sda6 11200 11571 2988058+ 82
Linux swap / Solaris
Output of lspci and lspci -n:
lspci:
00:00.0 Host bridge: Intel Corporation Mobile
945GM/PM/GMS/940GML and 945GT Express Memory
Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile
945GM/PM/GMS/940GML and 945GT Express PCI Express Root
Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7
Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7
Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7
Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7
Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7
Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7
Family) USB UHCI #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7
Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI
Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM
(ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7
Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation
82801GBM/GHM (ICH7 Family) Serial ATA Storage
Controller AHCI (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family)
SMBus Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies
Inc Radeon Mobility X1400
02:00.0 Ethernet controller: Intel Corporation 82573L
Gigabit Ethernet Controller
03:00.0 Network controller: Intel Corporation
PRO/Wireless 3945ABG Network Connection (rev 02)
15:00.0 CardBus bridge: Texas Instruments PCI1510 PC
card Cardbus Controller
lspci -n:
00:00.0 0600: 8086:27a0 (rev 03)
00:01.0 0604: 8086:27a1 (rev 03)
00:1b.0 0403: 8086:27d8 (rev 02)
00:1c.0 0604: 8086:27d0 (rev 02)
00:1c.1 0604: 8086:27d2 (rev 02)
00:1c.2 0604: 8086:27d4 (rev 02)
00:1c.3 0604: 8086:27d6 (rev 02)
00:1d.0 0c03: 8086:27c8 (rev 02)
00:1d.1 0c03: 8086:27c9 (rev 02)
00:1d.2 0c03: 8086:27ca (rev 02)
00:1d.3 0c03: 8086:27cb (rev 02)
00:1d.7 0c03: 8086:27cc (rev 02)
00:1e.0 0604: 8086:2448 (rev e2)
00:1f.0 0601: 8086:27b9 (rev 02)
00:1f.1 0101: 8086:27df (rev 02)
00:1f.2 0106: 8086:27c5 (rev 02)
00:1f.3 0c05: 8086:27da (rev 02)
01:00.0 0300: 1002:7145
02:00.0 0200: 8086:109a
03:00.0 0280: 8086:4227 (rev 02)
15:00.0 0607: 104c:ac56
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] =
didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Installation went fine. I initially tried using the
daily build businesscard installer but the CD would
not boot.
The system is set up to dual boot windows and Debian.
I used the NT bootloader because it is needed to
preserve the function of the Thinkvantage button.
Before the install I resized the windows partition
using gpart from the sysresccd.
I started the installer in expert mode. All the
hardware checks went fine. We use DHCP and the
installer set that up correctly. I made a 100 MB /boot
partition and installed Grub on it. The rest of the
free space I used for / and swap.
I installed the 2.6.18-3 kernel. In the install
additional software section I selected Base and
Laptop, but not Desktop
Before finishing the installation I used
dd if=/dev/sda3 of=grub.mbr bs=512 count=1
to make a file grub.mbr from the /boot partition
I copyed this file to the windows partition and
pointed the NT bootloader at it to load Grub. Then
Grub loads Debian.
After these changes I rebooted the system and it came
up fine.
For some reason xfonts-base had not been installed
(maybe because I did not check Desktop?) so X did not
work. I installed the
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
--- End Message ---
--- Begin Message ---
Op 24-12-2006 om 12:14 schreef Chris Zarzana:
<bigsnip/>
> I installed the
Closing this BR because it seems the incomplete version
of BR 404439 ( http://bugs.debian.org/404439 )
Cheers
Geert Stappers
--- End Message ---
