I guess this is a no to skip the inital sync. Included for completeness: ----- Forwarded message from Neil Brown <[EMAIL PROTECTED]> -----
There is no real need to perform the sync of a raid1 at creation. However it seems to be a good idea to regularly 'check' an array to make sure that all blocks on all disks get read to find sleeping bad blocks early. If you didn't sync first, then every check will find lots of errors. Ofcourse you could 'repair' instead of 'check'. Or do that once. Or something. --> checkarray, which runs regularly, would go berserk. For raid6 it is also safe to not sync first, though with the same caveat as raid1. Raid6 always updates parity by reading all blocks in the stripe that aren't known and calculating P and Q. So the first write to a stripe will make P and Q correct for that stripe. This is current behaviour. I don't think I can guarantee it will never changed. For raid5 it is NOT safe to skip the initial sync. It is possible for all updates to be "read-modify-write" updates which assume the parity is correct. If it is wrong, it stays wrong. Then when you lose a drive, the parity blocks are wrong so the data you recover using them is wrong. In summary, it is safe to use --assume-clean on a raid1 or raid1o, though I would recommend a "repair" before too long. For other raid levels it is best avoided. ----- End forwarded message ----- -- martin; (greetings from the heart of the sun.) \____ echo mailto: !#^."<*>"|tr "<*> mailto:"; [EMAIL PROTECTED] spamtraps: [EMAIL PROTECTED] "man kann die menschen nur von ihren eigenen meinungen überzeugen." -- charles tschopp
signature.asc
Description: Digital signature (GPG/PGP)
