Your message dated Wed, 20 Sep 2006 11:50:17 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Bug#388400: installation-report
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: installation-reports
Boot method: Etch NetInstall Beta 3 (11 Aug 2006)
Image version: From debian.org website / Beta 3
Date: 20 Sept 2006
Machine: IBM xSeries 306m
Processor: Intel Pentium 4 - 3.2Ghz with Hyperthreading
Memory: 512Mo DDR2 PC 4200
Partitions: That is the problem
Output of lspci and lspci -n: not possible
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [E]
Install base system: [O]
Install boot loader: [E]
Reboot: [E]
Comments/Problems:
The integrated RAID chipset of the IBM xSeries 306m named Adaptec SATA
HostRAID Controller seems to be not recognized.
Even if i had setup a RAID 1 array with my 2 SATA disks, the installer
see both disks independently, it does not see the RAID array.
Adaptec bios version is 4.7-5 B2064
IBM 306m bios version is 1.31
Other users have the same problem :
http://forums.debian.net/viewtopic.php?t=427&postdays=0&postorder=asc&start=15
Thanks a lot.
--- End Message ---
--- Begin Message ---
reassign 388400
On Wednesday 20 September 2006 11:25, Robin-Vinet Mathieu wrote:
> Comments/Problems:
> The integrated RAID chipset of the IBM xSeries 306m named Adaptec SATA
> HostRAID Controller seems to be not recognized.
> Even if i had setup a RAID 1 array with my 2 SATA disks, the installer
> see both disks independently, it does not see the RAID array.
Correct. dmraid is currently not support by the installer. This is a known
issue. Unfortunately nobody who has such hardware has so far implemented
support for this.
See http://bugs.debian.org/338719.
As this is a known and already documented issue, I am closing your
installation report.
Cheers,
FJP
pgpmMJpOC7KyB.pgp
Description: PGP signature
--- End Message ---
