Package: installation-reports
Boot method: I used the net-install cd
Image version: Etch Beta 3
Date: 16.9 Saturday morning
Machine: Acer Travelmate WLMi 4202
Processor: Intel Dual-Core 1,66Ghz (yonah)
Memory: 512Mb DDR
Partitions:
Chimaera:/media/usb0/Pictures# df -h
Tiedostojärjestelmä Koko Käyt Vapaa Käy% Liitospiste
/dev/vg-crypt/root 1,0G 122M 903M 12% /
tmpfs 251M 0 251M 0% /dev/shm
/dev/sda1 111M 12M 93M 12% /boot
/dev/mapper/vg--crypt-home
5,0G 1,3G 3,8G 25% /home
/dev/mapper/vg--crypt-opt
1,0G 33M 992M 4% /opt
/dev/mapper/vg--crypt-tmp
1,0G 34M 991M 4% /tmp
/dev/mapper/vg--crypt-usr
10G 2,4G 7,7G 24% /usr
/dev/mapper/vg--crypt-var
5,0G 1,1G 4,0G 22% /var
tmpfs 10M 140K 9,9M 2% /dev
Output of lspci and lspci -n:
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT
Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS/940GML and 945GT
Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1
(rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2
(rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3
(rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4
(rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #1 (rev
02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #2 (rev
02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #3 (rev
02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI #4 (rev
02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
(rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) Serial ATA
Storage Controller IDE (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation Quadro NVS 110M / GeForce
Go 7300 (rev a1)
05:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network
Connection (rev 02)
06:01.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev
02)06:04.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
00:00.0 0600: 8086:27a0 (rev 03)
00:01.0 0604: 8086:27a1 (rev 03)
00:1b.0 0403: 8086:27d8 (rev 02)
00:1c.0 0604: 8086:27d0 (rev 02)
00:1c.1 0604: 8086:27d2 (rev 02)
00:1c.2 0604: 8086:27d4 (rev 02)
00:1c.3 0604: 8086:27d6 (rev 02)
00:1d.0 0c03: 8086:27c8 (rev 02)
00:1d.1 0c03: 8086:27c9 (rev 02)
00:1d.2 0c03: 8086:27ca (rev 02)
00:1d.3 0c03: 8086:27cb (rev 02)
00:1d.7 0c03: 8086:27cc (rev 02)
00:1e.0 0604: 8086:2448 (rev e2)
00:1f.0 0601: 8086:27b9 (rev 02)
00:1f.2 0101: 8086:27c4 (rev 02)
00:1f.3 0c05: 8086:27da (rev 02)
01:00.0 0300: 10de:01d7 (rev a1)
05:00.0 0280: 8086:4222 (rev 02)
06:01.0 0200: 14e4:170c (rev 02)
06:04.0 0607: 1524:1410 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [E]
Create file systems: [E]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems: Few bugs with mousecursor in GUI. At some point it turned the
mousecursor icon to that "text-mode" instead of pointer.
I had troubles with the crypting my harddrive. It just said that error
happened. I could choose the encryption and all but when I was supposed
to write them to disk it started complaing about error. This happened after it
asked the passphrase. Also, I couldn't create LVM-partitions on the encrypted
partition.
I tried both, dm-crypt and the loop-AES. Unfortunately I don't have the logs anymore. I checked the partman log when trying encryption and it said something like following:
"/lib/partman/choose_partitions/35crypto/do_option: cryptsetup failed"
Encryption seemed to work the first time when I wiped the partition and tested
it but I couldn't make the partitioning I wanted so I exited the installer and
booted to retry
but it wouldn't work anymore.
Sometimes in expertgui the items I clicked and were selected weren't visible. You could
also add a "select all" option in the expert mode.
In the GUI mode you could change the focus to proper keyboard layout. When I
checked my language it focused the keyboard layout to the some other than my
language.
Also, there is a part of text not translated to finnish in the installer. Otherwise it
worked in finnish but in the end it stated "retrieving data from local mirror".
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
