Your message dated Wed, 13 Sep 2006 20:43:34 +0200
with message-id <[EMAIL PROTECTED]>
and subject line Bug#384601: Debian Installer Daily 2006-08-19
has caused the attached Bug report to be marked as done.
This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.
(NB: If you are a system administrator and have no idea what I am
talking about this indicates a serious mail system misconfiguration
somewhere. Please contact me immediately.)
Debian bug tracking system administrator
(administrator, Debian Bugs database)
--- Begin Message ---
Package: installation-reports
Boot method: CD
Image version:
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
Date: 2006-08-19
Machine: Acer Aspire 1353LC Notebook
Processor: Mobile AMD Athlon(tm) XP 2400+
Memory: 710708
Partitions: <df -Tl will do; the raw partition table is preferred>
Disk /dev/hda: 30.0 GB, 30005821440 bytes
255 heads, 63 sectors/track, 3648 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 608 4883728+ 83 Linux
/dev/hda2 609 3648 24418800 5 Extended
/dev/hda5 609 2310 13671283+ 83 Linux
/dev/hda6 3527 3648 979933+ 82 Linux swap / Solaris
/dev/hda7 2311 2323 104391 83 Linux
/dev/hda8 2324 2336 104391 83 Linux
/dev/hda9 2337 3526 9558643+ 8e Linux LVM
/dev/mapper/system-linux2
ext3 6438440 3012740 3098636 50% /
tmpfs tmpfs 355352 0 355352 0% /dev/shm
/dev/hda8 ext3 97826 18178 74429 20% /boot
/dev/hda1 ext3 4807056 4531932 30940 100% /media/hda1
/dev/hda5 ext3 13456580 11448964 1324052 90% /media/hda5
tmpfs tmpfs 10240 148 10092 2% /dev
Output of lspci and lspci -n:
lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host
Bridge00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge
00:07.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller
(rev 02)
00:08.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000
Controller (PHY/Link)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237
AC97 Audio Controller (rev 50)
00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller
(rev 80)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome]
Integrated Video (rev 01)
lspci -n
00:00.0 0600: 1106:3205
00:01.0 0604: 1106:b168
00:07.0 0607: 104c:ac50 (rev 02)
00:08.0 0c00: 104c:8026
00:10.0 0c03: 1106:3038 (rev 80)
00:10.1 0c03: 1106:3038 (rev 80)
00:10.2 0c03: 1106:3038 (rev 80)
00:10.3 0c03: 1106:3104 (rev 82)
00:11.0 0601: 1106:3177
00:11.1 0101: 1106:0571 (rev 06)
00:11.5 0401: 1106:3059 (rev 50)
00:11.6 0780: 1106:3068 (rev 80)
00:12.0 0200: 1106:3065 (rev 74)
01:00.0 0300: 1106:7205 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [OK]
Configure network HW: [E]
Config network: [E]
Detect CD: [ ]
Load installer modules: [OK]
Detect hard drives: [OK]
Partition hard drives: [OK]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [OK]
Install boot loader: [OK]
Reboot: [OK]
Comments/Problems:
-------------------------------------
Network problems:
Installer detected 2 network cards although I only have 1 in my notebook! I had
to chose eth1 otherwise I got no network with eth0.
But with eth1 I was able to install over net.
-------------------------------------
Other problems:
When starting installer with
installgui vga=791
Installer freezed when graphical gui was started
-------------------------------------
My mouse pointer disappeared when using installgui. I have Synaptics touchpad
and I was not able to use it. Had to navigate with keyboard.
Same when I plugged in my USB mouse - mousepointer disappeared.
-------------------------------------
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
The installer is very comfortable but I would REMOVE one step:
- Configuration of exim mail transfer agent - why should a normal user need
this?
Beside that it was a little bit confusing to set the language settings for
select-default-wordlist, select-default-ispell etc. (can't remember the exact
names of them)
-> It would be better to ask user which language setting to use and set these
settings for all other packages as well.
Good work!
_____________________________________________________________________
Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen!
http://smartsurfer.web.de/?mc=100071&distributionid=000000000066
--- End Message ---
--- Begin Message ---
Closing this report as most issues were answered and the installation was
in general successful.
Cheers,
FJP
--- End Message ---
