Package: installation-reports Boot method: CD Netinst Image version: http://cdimage.debian.org/cdimage/etch_di_beta3/i386/iso-cd/debian-testing-i386-netinst.iso 08-21-2006 Date: 08-21-2006 15:50 (French time)
Machine: IBM HS20 Processor: Xeon Memory: 1GB Partitions: none Output of lspci and lspci -n: 06:01:0 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 02) 06:01:1 Fibre Channel: QLogic Corp. QLA2312 Fibre Channel Adapter (rev 02) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [E] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: I try to install my HS20 (Bladecenter) with a boot on SAN. The installer load the driver for the HBA but it doesn't detect the volume. When I switch to an alternate console with Alt F2, I get the following message in /var/log/syslog: qla2xxx: firmware image unavailable. The directory /lib/modules/2.6.16-2-486/kernel/drivers/scsi/qla2xxx/ contains only qla2xxx.ko. When I'm doing the same test with Ubuntu 6.06, this directory contains qla2100.ko, qla2200.ko, qla2300.ko, qla2322.ko, qla2xxx.ko and qla6312.ko. With Ubuntu, the installation works fine. Thanks for your help Bruno Meneuvrier Responsable Systèmes et réseaux - Children Worldwide Fashion Email: bruno.meneuvrier at cwf.fr Tel: +33 2 51 66 39 42
