Package: installation-reports
Boot method: CD daily build iso then network
Image version: 2006-08-09 - debian homepage
Date: 2006-08-09 22:00
Machine: dell inspiron 9100 laptop
Processor:P4 2.8 GHz
Memory:1 GB
Partitions: <df -Tl will do; the raw partition table is preferred>
Filesystem Type 1K-blocks Used Available Use% Mounted on
/dev/hda9 ext3 1369978 104863 1192021 9% /
tmpfs tmpfs 517908 0 517908 0% /dev/shm
/dev/hda13 ext3 3091284 77308 2856944 3% /home
/dev/hda11 ext3 6728280 3052464 3334036 48% /usr
/dev/hda12 ext3 2403496 1398760 882644 62% /var
tmpfs tmpfs 10240 204 10036 2% /dev
Output of lspci and lspci -n:
00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub
Inte rface (rev 02)
00:01.0 PCI bridge: Intel Corporation 82865G/PE/P PCI to AGP Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Contr oller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Contr oller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Contr oller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI
Contr oller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI
Cont roller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)
00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface
Brid ge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller
(rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R)
A C'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Modem Controller
(rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon
9 600 M10]
02:00.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
02:01.0 CardBus bridge: Texas Instruments PCI4510 PC card Cardbus Controller
(re v 02)
02:01.1 FireWire (IEEE 1394): Texas Instruments PCI4510 IEEE-1394 Controller
02:03.0 Network controller: Broadcom Corporation BCM4309 802.11a/b/g (rev 02)
lspci -n
00:00.0 0600: 8086:2570 (rev 02)
00:01.0 0604: 8086:2571 (rev 02)
00:1d.0 0c03: 8086:24d2 (rev 02)
00:1d.1 0c03: 8086:24d4 (rev 02)
00:1d.2 0c03: 8086:24d7 (rev 02)
00:1d.3 0c03: 8086:24de (rev 02)
00:1d.7 0c03: 8086:24dd (rev 02)
00:1e.0 0604: 8086:244e (rev c2)
00:1f.0 0601: 8086:24d0 (rev 02)
00:1f.1 0101: 8086:24db (rev 02)
00:1f.5 0401: 8086:24d5 (rev 02)
00:1f.6 0703: 8086:24d6 (rev 02)
01:00.0 0300: 1002:4e50
02:00.0 0200: 14e4:4401 (rev 01)
02:01.0 0607: 104c:ac44 (rev 02)
02:01.1 0c00: 104c:8029
02:03.0 0280: 14e4:4324 (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [ 0]
Configure network HW: [0 ]
Config network: [ 0]
Detect CD: [0 ]
Load installer modules: [0 ]
Detect hard drives: [0 ]
Partition hard drives: [0 ]
Create file systems: [ 0]
Mount partitions: [0 ]
Install base system: [ 0]
Install boot loader: [0 ]
Reboot: [ 0]
Comments/Problems:i did the gui install very nice
but i had a problem with the question : clock congiguration UTC ? i don't know
what to answer was the
check flag a YES or was it a NO after install i noticed that debian screwed my
clock setting to UTC times instead of local time.
i check for the default desktop after install i notised that this was gnome i
prefere KDE and had to install it afterward
in the gui install it took some time time to get used to the fact that in
details ( shell menu ) i had to answer questions this was not obvious upfront
it took a long time ( more than 30 minutes ) to discovere this problem after
that no problems at all, but a newbie could be looking in the dark and thinking
the instalation has stalled.
install works great
Wacom Intuos 2 works in conjuction with logitech wheel mouse.
wacom pen workt
philips pcv740k webcam lights up but doesn't screw up the usb bus anymore
great plus.
network:works better , debian stable has a problem with dual boot with winxp.
After warm reboot from winxp debian was not able to configure the network
properly.
This problem seems to be solved now with sid on my system i can warm reboot to
debian now and get an working intenet connection.
3d ATI acceleration not tested - this was a great problem in debian stable
video resolution of 1900x1200 works great.
in the gui install it would be great for example to combine certain quistions
for example
localisation : time and language in one template.
i selected non free packedges but after install i could not select acrobat
reader \
i know that kde or gnome have pdf reader with a tested they have greatly
improved butthey lack some of the small featured witch acrobat has.
acrobat reader is a killer application for me without it linux is only 50%
functional.
i have to sort out if a can install this program via apt or via the adobe site
program download.
just my 0.02 cents
Jan Beldman
<Description of the install, in prose, and any thoughts, comments
and ideas you had during the initial install.>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
