Package: installation-reports
Boot method: <CD>
Image version: < 2006-05-21
http://cdimage.debian.org/cdimage/etch_di_beta2/i386/iso-cd/debian-testing-i386-netinst.iso
>
Date: < 2006-05-29 >
Machine: < desktop MB ATIA3/M1535D >
Processor: Duron 1300
Memory: 256 Mb
Partitions: debian on /dev/hda2
Disk /dev/hda: 41.1 GB, 41110142976 bytes
255 heads, 63 sectors/track, 4998 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 1 3419 27463086 83 Linux
/dev/hda2 * 3568 4998 11494507+ 83 Linux
/dev/hda3 3420 3567 1188810 5 Extended
/dev/hda5 3420 3501 658633+ 82 Linux swap / Solaris
/dev/hda6 3502 3567 530113+ 82 Linux swap / Solaris
Partition table entries are not in disk order
Output of lspci and lspci -n:
00:00.0 Host bridge: ATI Technologies Inc AGP Bridge [IGP 320M] (rev 13)
00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 320M] (rev 01)
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:03.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
Controller Audio Device (rev 02)
00:04.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
00:06.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:07.0 ISA bridge: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin
IV/V/V+]
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 320 M
00:00.0 0600: 1002:cab0 (rev 13)
00:01.0 0604: 1002:700f (rev 01)
00:02.0 0c03: 10b9:5237 (rev 03)
00:03.0 0401: 10b9:5451 (rev 02)
00:04.0 0101: 10b9:5229 (rev c4)
00:06.0 0c03: 10b9:5237 (rev 03)
00:07.0 0601: 10b9:1533
00:0d.0 0200: 10ec:8139 (rev 10)
00:11.0 0680: 10b9:7101
01:05.0 0300: 1002:4136
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [E]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
Because I use a modem adsl, I must wait the installation finishes to install
the package pppoeconf. Even if I chose "do not configure the network now"
the installer asked for a mirror site, which of course it couldn't find.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
