Package: installation-reports Boot method: CD Image version: 06-04-17 from //cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/debian-testing-amd64-netinst.iso Date: 06-04-19 13:20CET
Machine: Self made tower pc Processor: Intel(R) EM64T Pentium(R) 4 CPU 3.20GHz Memory: 1 GB DDR RAM Partitions: Filesystem 1k-blocks Used Available Use% Mounted on tmpfs 102400 30404 71996 30% / tmpfs 512844 444 512400 0% /dev tmpfs 512844 444 512400 0% /dev tmpfs 512844 444 512400 0% /.dev /dev/cdroms/cdrom0 97938 97938 0 100% /cdrom /dev/sda3 76896348 11664016 61326128 16% /mnt Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corporation 915G/P/GV/GL/PL/910GL Processor to I/O Controller (rev 04) 0000:00:01.0 PCI bridge: Intel Corporation 915G/P/GV/GL/PL/910GL PCI Express Root Port (rev 04) 0000:00:1b.0 0403: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller (rev 03) 0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) 0000:00:1c.1 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03) 0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d3) 0000:00:1f.0 ISA bridge: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03) 0000:00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 03) 0000:00:1f.2 IDE interface: Intel Corporation 82801FR/FRW (ICH6R/ICH6RW) SATA Controller (rev 03) 0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) 0000:01:04.0 Mass storage controller: Integrated Technology Express, Inc. IT/ITE8212 Dual channel ATA RAID controller (PCI version seems to be IT8212, embedded seems (rev 13) 0000:01:0a.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless Interface 0000:02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 Gigabit Ethernet Controller (rev 19) 0000:04:00.0 VGA compatible controller: ATI Technologies Inc R423 UK [Radeon X800SE (PCIE)] 0000:04:00.1 Display controller: ATI Technologies Inc Radeon R423 UK (PCIE) [X800 SE] (Secondary) 0000:00:00.0 0600: 8086:2580 (rev 04) 0000:00:01.0 0604: 8086:2581 (rev 04) 0000:00:1b.0 0403: 8086:2668 (rev 03) 0000:00:1c.0 0604: 8086:2660 (rev 03) 0000:00:1c.1 0604: 8086:2662 (rev 03) 0000:00:1d.0 0c03: 8086:2658 (rev 03) 0000:00:1d.1 0c03: 8086:2659 (rev 03) 0000:00:1d.2 0c03: 8086:265a (rev 03) 0000:00:1d.3 0c03: 8086:265b (rev 03) 0000:00:1d.7 0c03: 8086:265c (rev 03) 0000:00:1e.0 0604: 8086:244e (rev d3) 0000:00:1f.0 0601: 8086:2640 (rev 03) 0000:00:1f.1 0101: 8086:266f (rev 03) 0000:00:1f.2 0101: 8086:2652 (rev 03) 0000:00:1f.3 0c05: 8086:266a (rev 03) 0000:01:04.0 0180: 1283:8212 (rev 13) 0000:01:0a.0 0280: 104c:9066 0000:02:00.0 0200: 11ab:4362 (rev 19) 0000:04:00.0 0300: 1002:554b 0000:04:00.1 0380: 1002:556b Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [E] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: The module sk98lin needed by the network HW was not loaded automatically. Choosing it from the list that showed after the automatic loading failure had no effect. Changing to the VT2, inserting ist manally by "modprobe sk98lin" and inspecting the list put out by lsmod showed that ist was loaded. But in /proc/net/sk98lin/ there was not the expected Document "eth0" - there was nothing at all. I guess that the driver module could not be assigned correctly to the lan interface. As I found out trying to install the i386 daily-build-image (loaded down on April 17 at 10:11pm), there is a working sk98lin module loading automatically. Perhaps it is worth while taking its source code and compiling it in an amd64 environment? Greetings, Georg -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
