Package: debian-installer Version: 1.2?? (from Debian GNU/Linux testing _Sarge_ - Official Snapshot i386 Binary-1 (20041211))
d-i loads the hisax_fcpcipnp module for my "AVM Fritzcard PCI" (not "AVM Fritzcard PCI 2.0"!) Although this seems right when looking at "make menuconfig" in a 2.6 kernel (it says "AVM Fritz!Card PCI/PCIv2/PnP support (EXPERIMENTAL)"), it will not work with my card. I had to use only the hisax module with the parameters (type=27 protocol=2). (and I also needed the kernel option "pci=oldboot"). So if hisax_fcpcipnp.ko is the right choice then there should IMHO be a warning to the user that they might be better off with "hisax type=27". I'd like to say that the installer is very well done. Thank you for developing it and for reading this bug-report :-) This is the output of lspci: 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev c2) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 1b) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00:07.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 0e) 0000:00:07.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 20) 0000:00:0c.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 07) 0000:00:0e.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH A1 ISDN [Fritz] (rev 02) 0000:00:10.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30) 0000:01:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] (rev 15) -- Felix Natter I love secs... for programming -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
