Package: installation-reports
Debian-installer-version: netinst-daily-Image from 17.12.2004,
loaded from http://cdimage.debian.org/pub/cdimage-testing/daily/...
uname -a: Linux debian 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004 i686
GNU/Linux
Date: 18.12.2004 14:00
Method: default with "boot", no parameters, no preseeding; only base
system, no additional packages installed
Machine: Aopen-ATX-Board AX6BC, Intel-Chipset 440BX AGPset
Processor: P2 350Mhz
Memory: 128MB
Root Device: IDE hda
Root Size/partition table:
IDE1 Master (hda) - 1,3GB Seagate Technology 1275MB - ST31276A
Nr.1 primary 501,7MB ext3 /
Nr.2 primary 131,6MB Swap Swap
Nr.5 logical 641,5MB ext3 /home
Output from lspci:
0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
(rev 03)
0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge
(rev 03)
0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02)
0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01)
0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01)
0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02)
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev
01)
Output from lspci -n:
0000:00:00.0 0600: 8086:7190 (rev 03)
0000:00:01.0 0604: 8086:7191 (rev 03)
0000:00:07.0 0601: 8086:7110 (rev 02)
0000:00:07.1 0101: 8086:7111 (rev 01)
0000:00:07.2 0c03: 8086:7112 (rev 01)
0000:00:07.3 0680: 8086:7113 (rev 02)
0000:01:00.0 0300: 102b:0521 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O] see below
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create filesystems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
I had the reproducable problem showing the package bsdmainutils as
corrupt. See log below. When the installer aborted base-install
because of the corrupted file, I choosed the cdrom check
from the menu.
The check was successfull and after that the base install was
successfull, too. I tried it 4 times. Always the same.
The problem was my cdrom drive (don't know the exact reason, but using
another drive solved this; the cd-iso-image was correct (md5sum check)).
Maybe we want to add a comment on this to the installer or at least to
the manual? There is no hint in the installer to the cdrom-checker, when
installation fails due to corrupted files. Newbies won't find that function
in the menu.
Dec 18 14:06:40 run-debootstrap[14118]: file:///cdrom/pool/main/b/bsdmainutils/
bsdmainutils_6.0.17_i386.deb was corrupt
Dec 18 14:07:35 base-installer: error: exiting on error
base-installer/debootstrap-failed
Dec 18 14:07:40 main-menu[334]: WARNING **: Configuring 'base-installer' failed
with error code 1
Dec 18 14:07:40 main-menu[334]: WARNING **: Menu item 'base-installer' failed.
Anybody interested on typos in a german installation?
Good work, Installer Team.
Greetings
Holger
--
==============================================================
Created with Sylpheed-Claws 0.9.12
under Debian GNU LINUX 3.1 Sarge (testing).
http://counter.li.org/ Registered LinuxUser #311290
Spamfiltering powered by www.spamassassin.org
=============================================================
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
