Package: installation-reports INSTALL REPORT
Debian-installer-version: 2004-12-06 http://mirrors.uwa.edu.au/linux/debian-amd64 uname -a: Linux martello 2.6.8-9-amd64-k8 #1 Sat Dec 4 23:16:23 CET 2004 x86_64 GNU/Linux Date: 2004-12-12 Method: PXE boot from local tftp server and nearby Debian AMD64 mirror. Machine has no floppy or CDROM device. Machine: Custom built dual opteron file server Processor: Dual Opteron 242 Memory: 2 GB Root Device: 36 GB Western Digital Raptor 10,000 RPM SATA Root Size/partition table: Filesystem Size Used Avail Use% Mounted on /dev/mapper/system-rootusr 9.9G 288M 9.4G 3% / /dev/sda1 89M 11M 73M 13% /boot /dev/mapper/reliable-home 40G 33M 39G 1% /home /dev/mapper/system-var 5.0G 107M 4.8G 3% /var /dev/system is an LVM vg of /dev/sda, the 36gig WD Raptor /dev/reliable is an LVM vg of /dev/md0 and /dev/md1 which are degraded (one disk each) RAID 1 arrays over 2 Seagate Barracuda 200GB SATA 7200rpm drives. There are two more of these drives in the machine, but we are waiting on a PCI-X SATA controller for production use. Output of lspci and lspci -n: 0000:00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) 0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) 0000:00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) 0000:00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02) 0000:00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05) 0000:00:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 0000:00:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) 0000:00:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 0000:00:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X APIC (rev 01) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:02:09.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03) 0000:02:09.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 03) 0000:03:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 0000:03:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 0000:03:05.0 Unknown mass storage controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) 0000:03:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 0000:03:08.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 10) 0000:00:06.0 0604: 1022:7460 (rev 07) 0000:00:07.0 0601: 1022:7468 (rev 05) 0000:00:07.1 0101: 1022:7469 (rev 03) 0000:00:07.2 0c05: 1022:746a (rev 02) 0000:00:07.3 0680: 1022:746b (rev 05) 0000:00:0a.0 0604: 1022:7450 (rev 12) 0000:00:0a.1 0800: 1022:7451 (rev 01) 0000:00:0b.0 0604: 1022:7450 (rev 12) 0000:00:0b.1 0800: 1022:7451 (rev 01) 0000:00:18.0 0600: 1022:1100 0000:00:18.1 0600: 1022:1101 0000:00:18.2 0600: 1022:1102 0000:00:18.3 0600: 1022:1103 0000:00:19.0 0600: 1022:1100 0000:00:19.1 0600: 1022:1101 0000:00:19.2 0600: 1022:1102 0000:00:19.3 0600: 1022:1103 0000:02:09.0 0200: 14e4:1648 (rev 03) 0000:02:09.1 0200: 14e4:1648 (rev 03) 0000:03:00.0 0c03: 1022:7464 (rev 0b) 0000:03:00.1 0c03: 1022:7464 (rev 0b) 0000:03:05.0 0180: 1095:3114 (rev 02) 0000:03:06.0 0300: 1002:4752 (rev 27) 0000:03:08.0 0200: 8086:1229 (rev 10) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [E] Reboot: [ ] Comments/Problems: Initially we tried setting up the entirity of /dev/sda (WD Raptor) with LVM, however neither lilo (which d-i tried) nor grub could boot from them on this architecture. Upon reinstalling with a separate /boot d-i installed grub which worked fine. Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
