Package: installation-reports
INSTALL REPORT
Debian-installer-version:
Debian GNU/Linux testing "Sarge" - Official Snapshot i386 Binary-1 (20041213)
uname -a: Linux cl2 2.6.8-1-386 #1 Thu Nov 25 04:24:08 UTC 2004 i686 GNU/Linux
Date: Thu Dec 16 10:12:00 CET 2004
Method: netinst iso, standard install, mirror: gd.tuwien.ac.at
Machine: Dell Precision 370
Processor: Intel(R) Pentium(R) 4 CPU 3.00GHz
Memory: 1GB
Root Device: /dev/md0
cl2:~# cat /proc/mdstat
Personalities : [raid1]
md0 : active raid1 sda2[0] sdb1[1]
3903680 blocks [2/2] [UU]
Root Size/partition table:
cl2:~# fdisk -ul
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders, total 312500000 sectors
Units = sectors of 1 * 512 = 512 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 63 112454 56196 6 FAT16
/dev/sda2 112455 7920044 3903795 fd Linux raid autodetect
Disk /dev/sdb: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders, total 312500000 sectors
Units = sectors of 1 * 512 = 512 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 63 7807589 3903763+ fd Linux raid autodetect
cl2:~# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md0 3.7G 449M 3.1G 13% /
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: Intel Corp. 925X Memory Controller Hub (rev 04)
0000:00:01.0 PCI bridge: Intel Corp. 925X PCI Express Root Port (rev 04)
0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI
Express Port 1 (rev 03)
0000:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI
Express Port 2 (rev 03)
0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family)
USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3)
0000:00:1e.2 Multimedia audio controller: Intel Corp. 82801FB/FBM/FR/FW/FRW
(ICH6 Family) AC'97 Audio Controller (rev 03)
0000:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface
Bridge (rev 03)
0000:00:1f.1 IDE interface: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE
Controller (rev 03)
0000:00:1f.2 IDE interface: Intel Corp. 82801FR/FRW (ICH6R/ICH6RW) SATA
Controller (rev 03)
0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 03)
0000:01:00.0 VGA compatible controller: nVidia Corporation: Unknown device 00fd
(rev a2)
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751
Gigabit Ethernet PCI Express (rev 01)
0000:00:00.0 0600: 8086:2584 (rev 04)
0000:00:01.0 0604: 8086:2585 (rev 04)
0000:00:1c.0 0604: 8086:2660 (rev 03)
0000:00:1c.1 0604: 8086:2662 (rev 03)
0000:00:1d.0 0c03: 8086:2658 (rev 03)
0000:00:1d.1 0c03: 8086:2659 (rev 03)
0000:00:1d.2 0c03: 8086:265a (rev 03)
0000:00:1d.3 0c03: 8086:265b (rev 03)
0000:00:1d.7 0c03: 8086:265c (rev 03)
0000:00:1e.0 0604: 8086:244e (rev d3)
0000:00:1e.2 0401: 8086:266e (rev 03)
0000:00:1f.0 0601: 8086:2640 (rev 03)
0000:00:1f.1 0101: 8086:266f (rev 03)
0000:00:1f.2 0101: 8086:2652 (rev 03)
0000:00:1f.3 0c05: 8086:266a (rev 03)
0000:01:00.0 0300: 10de:00fd (rev a2)
0000:02:00.0 0200: 14e4:1677 (rev 01)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [E]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [E]
Comments/Problems:
CD Detection: d-i failed to detect the cdrom. Workaround: Switch the
BIOS from RAID/AHCI to RAID/ATA. After this it was detected
automatically.
Reboot: This machine has a 57MB system partition from Dell. Although I
haven't looked at it I presume it contains some kind of extendend BIOS
tool. This partition (sda1) is marked as bootable. I presume this was
the reason why GRUB was installed with groot=(hd0,0), which failed to
boot into Linux. I understand that this is a user error on the one hand,
on the other hand this also seems to indicate that groot doesn't need to
be bootable but the partition containing the kernel.
hwclock: can be solved by generous applicance of ^C and killall -9
hwclock.
Regards, David
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
