Package: installation-reports INSTALL REPORT
Debian-installer-version: 18-Nov-2004 http://ftp.fi.debian.org/debian/dists/testing/main/installer-i386/current/images/floppy/ uname -a: Linux xyz 2.4.27-1-686 #1 Fri Sep 3 06:28:00 UTC 2004 i686 GNU/Linux Date: 3-Dec-2003 Method: How did you install? Net. What did you boot off? Floppy. If network install, from where? ftp.fi.debian.org Proxied? Yes Machine: Osborne POWER 133 AE7F-800-B4 Processor: Intel Pentium III (Coppermine) stepping 06, 803.430 MHz Memory: 383MB LOWMEM Root Device: IDE: QUANTUM FIREBALLP LM15, ATA DISK drive, 15019 MB Root Size/partition table: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/hda3 / xfs defaults 0 1 /dev/hda1 /boot ext3 defaults 0 2 /dev/hda2 none swap sw 0 0 /dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 # cat /proc/partitions major minor #blocks name rio rmerge rsect ruse wio wmerge wsect wuse running use aveq 22 0 125842 hdc 314 4149 17840 6060 0 0 0 0 -42 8370156 277737 3 0 14667345 ide/host0/bus0/target0/lun0/disc 35380 105208 1120564 465260 116862 458252 4584731 26452630 -1 8191016 18536693 3 1 96358 ide/host0/bus0/target0/lun0/part1 36 597 1266 690 37 24 122 13350 0 12770 14040 3 2 1951897 ide/host0/bus0/target0/lun0/part2 395 2120 20120 19090 855 5383 51784 158700 0 17130 177920 3 3 12619057 ide/host0/bus0/target0/lun0/part3 34947 102485 1099162 445470 115970 452845 4532825 26280580 0 544440 26728500 Output of lspci and lspci -n: 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8605 [ProSavage PM133] (rev 81) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8605 [PM133 AGP] 0000:00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22) 0000:00:04.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) 0000:00:04.4 Host bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) 0000:00:0e.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 22) 0000:00:11.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) 0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04) 0000:00:00.0 0600: 1106:0605 (rev 81) 0000:00:01.0 0604: 1106:8605 0000:00:04.0 0601: 1106:0686 (rev 22) 0000:00:04.1 0101: 1106:0571 (rev 10) 0000:00:04.4 0600: 1106:3057 (rev 30) 0000:00:0e.0 0200: 1011:0009 (rev 22) 0000:00:11.0 0200: 10b7:9200 (rev 74) 0000:01:00.0 0300: 102b:0525 (rev 04) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O-] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Users should be allowed to make their own networking configuration, even if there is working DHCP server in network. I didn't find any way to change network settings once installer decided for me that settings got from DHCP-server are fine. About the translation: If everything is translated to Finnish (my native language), why there is still buttons like <Yes>, <No>, <Cancel> with each question. Buttons text should be translated too. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
