Package: installation-reports Debian-installer-version: <Fill in date and from where you got the image> uname -a: Linux veturas 2.6.8-1-686 #1 Thu Nov 25 04:34:30 UTC 2004 i686 GNU/Lin ux Date: 2004-12-03 19:00 Method: CD/network install from ftp.uk.debian.org
Machine: AJP M6000NE (like ASUS M6N with larger screen) Processor: Intel Pentium M 1.6GHz Memory: 1GB Root Device: /dev/hda1 Root Size/partition table: Device Boot Start End Blocks Id System Mount /dev/hda1 * 1 34 273073+ 83 Linux / /dev/hda2 35 9729 77875087+ 5 Extended /dev/hda5 35 642 4883728+ 83 Linux /usr /dev/hda6 643 1007 2931831 83 Linux /var /dev/hda7 1008 1337 2650693+ 82 Linux swap /dev/hda8 1338 1386 393561 83 Linux /tmp /dev/hda9 1387 9729 67015116 83 Linux /home Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 82855PM Processor to I/O Controller (rev 2 1) 0000:00:01.0 PCI bridge: Intel Corp. 82855PM Processor to AGP Controller (rev 21 ) 0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) US B UHCI Controller #1 (rev 03) 0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) US B UHCI Controller #2 (rev 03) 0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) US B UHCI Controller #3 (rev 03) 0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83) 0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03) 0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Contro ller (rev 03) 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4 -L/ICH4-M) AC'97 Audio Controller (rev 03) 0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Rad eon 9600 M10] 0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03) 0000:02:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac) 0000:02:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ac) 0000:02:01.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller (rev 04) 0000:02:02.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05) 0000:00:00.0 0600: 8086:3340 (rev 21) 0000:00:01.0 0604: 8086:3341 (rev 21) 0000:00:1d.0 0c03: 8086:24c2 (rev 03) 0000:00:1d.1 0c03: 8086:24c4 (rev 03) 0000:00:1d.2 0c03: 8086:24c7 (rev 03) 0000:00:1d.7 0c03: 8086:24cd (rev 03) 0000:00:1e.0 0604: 8086:2448 (rev 83) 0000:00:1f.0 0601: 8086:24cc (rev 03) 0000:00:1f.1 0101: 8086:24ca (rev 03) 0000:00:1f.5 0401: 8086:24c5 (rev 03) 0000:00:1f.6 0703: 8086:24c6 (rev 03) 0000:01:00.0 0300: 1002:4e50 0000:02:00.0 0200: 14e4:169c (rev 03) 0000:02:01.0 0607: 1180:0476 (rev ac) 0000:02:01.1 0607: 1180:0476 (rev ac) 0000:02:01.2 0c00: 1180:0552 (rev 04) 0000:02:02.0 0280: 8086:4220 (rev 05) Base System Installation Checklist: Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: installation itself very smooth - great work battery status not available through ACPI (DSDT problem) ipw2200 mod compile didn't quite work - upgrade to -686 kernel succeeded XFree86 config didn't allow selection of correct resolution (1680x1050)- will file a wishlist bug against it for this -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
