Package: installation-reports
Debian-installer-version: <rc2 dated 18-11-2004>
uname -a: <Linux indeb005 2.6.8-1-686 #1 Thu Nov 25 04:34:30 UTC 2004 i686
GNU/Linux>
Date: <2004-12-03 16:00>
Method: <netboot using a dhcp-ed pxe nic (tg3) with tftp-hpa from a local apt
mirror through apt-proxy>
Machine: <Compaq/HP DL-380 dual processor>
Processor: Intel(R) Xeon(TM) CPU 2.80GHz (2x)
Memory: 1GB RAM
Root Device: <Compaq Smart Array 5i/532 with 2 x 72GB scsi hd's in mirror>
Root Size/partition table:
indeb005:~# fdisk -l /dev/cciss/c0d0
Disk /dev/cciss/c0d0: 72.8 GB, 72826629120 bytes
255 heads, 63 sectors/track, 8854 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/cciss/c0d0p1 1 34 273073+ 83 Linux
/dev/cciss/c0d0p2 35 1994 15743700 5 Extended
/dev/cciss/c0d0p3 * 1995 2116 979965 83 Linux
/dev/cciss/c0d0p5 35 642 4883728+ 83 Linux
/dev/cciss/c0d0p6 643 1007 2931831 83 Linux
/dev/cciss/c0d0p7 1008 1337 2650693+ 82 Linux swap
/dev/cciss/c0d0p8 1338 1386 393561 83 Linux
/dev/cciss/c0d0p9 1387 1994 4883728+ 83 Linux
Output of lspci and lspci -n:
indeb005:~# lspci
0000:00:00.0 Host bridge: ServerWorks CMIC-LE Host Bridge (GC-LE chipset) (rev
33)
0000:00:00.1 Host bridge: ServerWorks CMIC-LE Host Bridge (GC-LE chipset)
0000:00:00.2 Host bridge: ServerWorks CMIC-LE Host Bridge (GC-LE chipset)
0000:00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
0000:00:04.0 System peripheral: Compaq Computer Corporation Integrated Lights
Out Controller (rev 01)
0000:00:04.2 System peripheral: Compaq Computer Corporation Integrated Lights
Out Processor (rev 01)
0000:00:0f.0 ISA bridge: ServerWorks CSB5 South Bridge (rev 93)
0000:00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93)
0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 05)
0000:00:0f.3 Host bridge: ServerWorks CSB5 LPC bridge
0000:00:10.0 Host bridge: ServerWorks CIOB-X2 PCI-X I/O Bridge (rev 05)
0000:00:10.2 Host bridge: ServerWorks CIOB-X2 PCI-X I/O Bridge (rev 05)
0000:00:11.0 Host bridge: ServerWorks CIOB-X2 PCI-X I/O Bridge (rev 05)
0000:00:11.2 Host bridge: ServerWorks CIOB-X2 PCI-X I/O Bridge (rev 05)
0000:01:03.0 RAID bus controller: Compaq Computer Corporation Smart Array
5i/532 (rev 01)
0000:02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X
Gigabit Ethernet (rev 02)
0000:02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X
Gigabit Ethernet (rev 02)
0000:06:1e.0 PCI Hot-plug controller: Compaq Computer Corporation PCI Hotplug
Controller (rev 14)
indeb005:~# lspci -n
0000:00:00.0 0600: 1166:0014 (rev 33)
0000:00:00.1 0600: 1166:0014
0000:00:00.2 0600: 1166:0014
0000:00:03.0 0300: 1002:4752 (rev 27)
0000:00:04.0 0880: 0e11:b203 (rev 01)
0000:00:04.2 0880: 0e11:b204 (rev 01)
0000:00:0f.0 0601: 1166:0201 (rev 93)
0000:00:0f.1 0101: 1166:0212 (rev 93)
0000:00:0f.2 0c03: 1166:0220 (rev 05)
0000:00:0f.3 0600: 1166:0225
0000:00:10.0 0600: 1166:0101 (rev 05)
0000:00:10.2 0600: 1166:0101 (rev 05)
0000:00:11.0 0600: 1166:0101 (rev 05)
0000:00:11.2 0600: 1166:0101 (rev 05)
0000:01:03.0 0104: 0e11:b178 (rev 01)
0000:02:01.0 0200: 14e4:16a7 (rev 02)
0000:02:02.0 0200: 14e4:16a7 (rev 02)
0000:06:1e.0 0804: 0e11:a0f7 (rev 14)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [E]
Reboot: [O]
Comments/Problems:
Grub still does not install on these kind (scsi?) of machines.
"The file /boot/grub/stage1 not read correctly." is the main
error message, I think. Worked around it by installing lilo.
Does anybody know of a way to install grub?
debian-installer logs available on request.
Have control of this beast, when asked, available for debugging.
Screens (typos possible, had to copy it the chinese way ;-)) :
tty1:
[!!] Install the GRUB boot loader on a
Unable to install GRUB in (hd0)
Executing 'grub-install (hd0)' failed.
This is a fatal error.
<Go Back> <Continue>
tty3:
Setting up usbutils (0.11+==cvs20041108-1) ...
Reading Package Lists...
Building Dependency Tree...
e2fsprogs is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading Package Lists...
Building Dependency Tree...
Suggested packages:
grub-doc grubconf
The following NEW packages will be installed:
grub
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 350kB of archives.
After unpacking 750kB of additional disk space will be used.
Get:1 http://10.15.58.67 sarge/main grub 0.95+cvs20040624-10 [350kB]
Fetched 350kB in 0s (654kB/s)
Selecting previously deselected package grub.
(Reading database ... 9946 files and directories currently installed.)
Unpacking grub (from .../grub_0.95+cvs20040624-10_i386.deb) ...
Setting up grub (0.95+cvs20040624-10) ...
Probing devices to guess BIOS drives. This may take a long time.
The file /boot/grub/stage1 not read correctly.
tty4:
Dec 3 16:52:09 grub-installer: info: Installing grub on '(hd0)'
Dec 3 16:52:09 grub-installer: info: grub-install supports --no-floppy
Dec 3 16:52:09 grub-installer: info: Running chroot /target /sbin/grub-install
--recheck --no-floppy "(hd0)"
Dec 3 16:52:16 grub-installer: error: Running 'grub-install --recheck --no-flop
py "(hd0)"' failed
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
