Package: installation-reports INSTALL REPORT
Debian-installer-version: sarge-powerpc-netinst.iso (debian-installer rc2) uname -a: 2.6.8-powerpc #1 Sun Oct 3 13:22:21 CEST 2004 ppc GNU/Linux Date: December 2nd, 2004 Method: cd Machine: iBook G4 Processor: PowerPC G4 (7447A, altivec supported, clock 1066MHz) Memory: 256 MB Root Device: IDE Root Size/partition table: # type name length base ( size ) system /dev/hda1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map /dev/hda2 Apple_Boot eXternal booter 17408 @ 64 ( 8.5M) Unknown /dev/hda3 Apple_UFS Apple_UFS_Untitled_2 8443192 @ 17472 ( 4.0G) Unknown /dev/hda4 Apple_Bootstrap untitled 1954 @ 8460664 (977.0k) NewWorld bootblock /dev/hda5 Apple_UNIX_SVR2 untitled 9765625 @ 8462618 ( 4.7G) Linux native /dev/hda6 Apple_UNIX_SVR2 untitled 38476563 @ 18228243 ( 18.3G) Linux native /dev/hda7 Apple_UNIX_SVR2 swap 1900314 @ 56704806 (927.9M) Linux swap Root is mounted on /dev/hda5, home on /dev/hda6, MAC OS X shipped with the computer is on /dev/hda3. Output of lspci and lspci -n: #lspci 0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 AGP 0000:00:10.0 VGA compatible controller: ATI Technologies Inc RV250 5c63 [Radeon Mobility 9200 M9+] (rev 01) 0001:10:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 PCI 0001:10:17.0 ff00: Apple Computer Inc. KeyLargo/Intrepid Mac I/O 0001:10:18.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:10:19.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:10:1a.0 USB Controller: Apple Computer Inc. KeyLargo/Intrepid USB 0001:10:1b.0 USB Controller: NEC Corporation USB (rev 43) 0001:10:1b.1 USB Controller: NEC Corporation USB (rev 43) 0001:10:1b.2 USB Controller: NEC Corporation USB 2.0 (rev 04) 0002:20:0b.0 Host bridge: Apple Computer Inc. UniNorth 2 Internal PCI 0002:20:0d.0 ff00: Apple Computer Inc. UniNorth/Intrepid ATA/100 0002:20:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth 2 FireWire (rev 81) 0002:20:0f.0 Ethernet controller: Apple Computer Inc. UniNorth 2 GMAC (Sun GEM) (rev 80) #lspci -n 0000:00:0b.0 0600: 106b:0034 0000:00:10.0 0300: 1002:5c63 (rev 01) 0001:10:0b.0 0600: 106b:0035 0001:10:17.0 ff00: 106b:003e 0001:10:18.0 0c03: 106b:003f 0001:10:19.0 0c03: 106b:003f 0001:10:1a.0 0c03: 106b:003f 0001:10:1b.0 0c03: 1033:0035 (rev 43) 0001:10:1b.1 0c03: 1033:0035 (rev 43) 0001:10:1b.2 0c03: 1033:00e0 (rev 04) 0002:20:0b.0 0600: 106b:0036 0002:20:0d.0 ff00: 106b:003b 0002:20:0e.0 0c00: 106b:0031 (rev 81) 0002:20:0f.0 0200: 106b:0032 (rev 80) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Installer does not add existing MAC OS X installation to yaboot. On intels grub is able to add existing Windows to its config, it would be nice for yaboot to also have such option. Also debian-installer might be used as a very reliable hardware test - I got a computer which failed many times on installation procedure. Apple's hardware test CD stated that the computer was OK. But clearly it was not. Later it started to hang on MAC OS X and finally Apple replaced the unit for the good one. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]