Package: installation-reports INSTALL REPORT
Debian-installer-version: Sarge netinst RC2 uname -a: Linux debian1 2.6.8-1-386 #1 Thu Nov 11 12:18:43 EST 2004 i686 GNU/Linux Date: Fri Nov 26 02:31:35 GMT 2004 Method: CD boot, netinst Machine: Rock Sigma Laptop, a re-badged Mitac 6120L Processor: Intel Celeron 433 Memory: 128M Root Device: IDE /dev/hda Root Size/partition table: Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03) 0000:00:01.0 PCI bridge: Intel Corp. 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03) 0000:00:07.0 ISA bridge: Intel Corp. 82371AB/EB/MB PIIX4 ISA (rev 02) 0000:00:07.1 IDE interface: Intel Corp. 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:07.3 Bridge: Intel Corp. 82371AB/EB/MB PIIX4 ACPI (rev 02) 0000:00:08.0 CardBus bridge: Texas Instruments PCI1225 (rev 01) 0000:00:08.1 CardBus bridge: Texas Instruments PCI1225 (rev 01) 0000:00:09.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24 [CrystalClear SoundFusion Audio Accelerator] (rev 01) 0000:00:0a.0 Communication controller: Lucent Microelectronics F-1156IV WinModem (V90, 56KFlex) (rev 01) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage LT Pro AGP-133 (rev dc) 0000:02:00.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) 0000:00:00.0 0600: 8086:7190 (rev 03) 0000:00:01.0 0604: 8086:7191 (rev 03) 0000:00:07.0 0601: 8086:7110 (rev 02) 0000:00:07.1 0101: 8086:7111 (rev 01) 0000:00:07.2 0c03: 8086:7112 (rev 01) 0000:00:07.3 0680: 8086:7113 (rev 02) 0000:00:08.0 0607: 104c:ac1c (rev 01) 0000:00:08.1 0607: 104c:ac1c (rev 01) 0000:00:09.0 0401: 1013:6003 (rev 01) 0000:00:0a.0 0780: 11c1:044a (rev 01) 0000:01:00.0 0300: 1002:4c42 (rev dc) 0000:02:00.0 0200: 1011:0019 (rev 41) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [E] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Failed to detect my Genius MF3000 CardBus ethernet card automatically, I had to select the tulip module manually from the list. Other than that, the install worked well. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]