Package: installation-reports
Debian-installer-version: 25/11/04
http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc2/
uname -a: linux26
Date: 25/11/04 20:30
Method: CDROM Netinst and businesscard
Machine: Dell Dimention L800r
Processor:Intel PII 800
Memory:192MB
Root Device: <IDE? SCSI? Name of device?>
Root Size/partition table: <Feel free to paste the full partition
table, with notes on which partitions are mounted where.>
Output of lspci and lspci -n:
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [E]
Load installer modules: [O]
Detect hard drives: [ ]
Partition hard drives: [ ]
Create file systems: [ ]
Mount partitions: [ ]
Install base system: [ ]
Install boot loader: [ ]
Reboot: [ ]
Comments/Problems:
After setting up the Locale and Language the install failed to detect CDROM on my
Dell Dimention L800r using debian-installer rc2 (Both Netinst & Businesscard).
The last thing reported on the 'F3' console was insmod isofs
The 'F4' console had the following;
Missing Modules 'agpgart (Intel Corp 82810E0 DC-133 GMCH, i810.rng (Intel Corp
82801AA) PCI Bridge, i810-tco, 3c59x, ide-mod, ide-probe-mod, ide-generic,
ide-floppy
CDROM-mount failed (error=1) device=/dev/cdroms/cdrom0
I tried again only this time using 'expert' parameter. I then deselected the
Piix Inel 82801AA IDE module, the CDROM was detected and the installation
continued, but then failed at 'scanning hard disks'
I also tried the 'sid_d-i businesscard image 24-Nov-2004 22:57
regards,
Patrick
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
