Package: installation-reports
INSTALL REPORT
Debian-installer-version: deb cdrom:[Debian GNU/Linux testing _Sarge_ -
Official Snapshot i386 Binary-1 (20041015)] also 2, 3
uname -a: Linux my64.ruskin 2.4.27-1-386 #1 Fri Sep 3 06:24:46 UTC 2004
i686 GNU/Linux
Date: Nov 5 2004
Method: Booted from 3-CD set dated Oct 15 2004
Machine: Home assembled
Processor: AMD Athlon 64 3000+
Memory: 2 x 512MB Geil PC3200 400MHz DDR Dual Channel, total 1024MB
Root Device: hde Seagate ST380013AS SATA 80GB 7200rpm 8MB cache
Root Size/partition table:
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/hde1 / ext3 defaults,errors=remount-ro
0 1
/dev/hde9 /home ext3 defaults 0 2
/dev/hde8 /tmp ext3 defaults 0 2
/dev/hde5 /usr ext3 defaults 0 2
/dev/hde6 /var ext3 defaults 0 2
/dev/hde7 none swap sw 0 0
/dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0
Output of lspci and lspci -n:
[EMAIL PROTECTED]:~$ lspci
0000:00:00.0 Host bridge: nVidia Corporation: Unknown device 00e1 (rev
a1)
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00e0 (rev
a2)
0000:00:01.1 SMBus: nVidia Corporation: Unknown device 00e4 (rev a1)
0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 00e7
(rev a1)
0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 00e7
(rev a1)
0000:00:02.2 USB Controller: nVidia Corporation: Unknown device 00e8
(rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation: Unknown
device 00ea (rev a1)
0000:00:08.0 IDE interface: nVidia Corporation: Unknown device 00e5 (rev
a2)
0000:00:0a.0 IDE interface: nVidia Corporation: Unknown device 00e3 (rev
a2)
0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 00e2 (rev
a2)
0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 00ed (rev
a2)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: nVidia Corporation NV18
[GeForce4 MX 4000 AGP 8x] (rev a4)
0000:02:0b.0 Ethernet controller: Marvell Technology Group Ltd. Yukon
Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
0000:02:0c.0 RAID bus controller: Integrated Technology Express, Inc.
IT/ITE8212 Dual channel ATA RAID controller (PCI version seems to be
IT8212, embedded seems (rev 11)
0000:02:0d.0 RAID bus controller: Silicon Image, Inc. (formerly CMD
Technology Inc) SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev
01)
0000:02:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link)
[EMAIL PROTECTED]:~$ lspci -n
0000:00:00.0 0600: 10de:00e1 (rev a1)
0000:00:01.0 0601: 10de:00e0 (rev a2)
0000:00:01.1 0c05: 10de:00e4 (rev a1)
0000:00:02.0 0c03: 10de:00e7 (rev a1)
0000:00:02.1 0c03: 10de:00e7 (rev a1)
0000:00:02.2 0c03: 10de:00e8 (rev a2)
0000:00:06.0 0401: 10de:00ea (rev a1)
0000:00:08.0 0101: 10de:00e5 (rev a2)
0000:00:0a.0 0101: 10de:00e3 (rev a2)
0000:00:0b.0 0604: 10de:00e2 (rev a2)
0000:00:0e.0 0604: 10de:00ed (rev a2)
0000:00:18.0 0600: 1022:1100
0000:00:18.1 0600: 1022:1101
0000:00:18.2 0600: 1022:1102
0000:00:18.3 0600: 1022:1103
0000:01:00.0 0300: 10de:0185 (rev a4)
0000:02:0b.0 0200: 11ab:4320 (rev 13)
0000:02:0c.0 0104: 1283:8212 (rev 11)
0000:02:0d.0 0104: 1095:3512 (rev 01)
0000:02:0e.0 0c00: 104c:8024
[EMAIL PROTECTED]:~$
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O ]
Configure network HW: [ E]
Config network: [ E]
Detect CD: [ O]
Load installer modules: [ O]
Detect hard drives: [ O]
Partition hard drives: [ O]
Create file systems: [ O]
Mount partitions: [ O]
Install base system: [ O]
Install boot loader: [ O]
Reboot: [ O]
Comments/Problems:
First I tried i386 sarge with 2.6 kernel, cds dated Oct 15 2004.
Install stopped at partitioning: "No partitionable media found"
Then tried i386 sarge with 2.4: Install got right thru to tasksel and
got stuck. I installed gdm, gnome, x-windows-system with aptitude and
then tasksel worked to get the rest of the Desktop stuff.
Sound and network not working . This is the system I am writing this on.
Mobo is a Gigabyte GA-K8NS Pro from the K8 Triton series.
Some extra info from the manual that might help:
on-Board Sound: ALC850 CODEC (UAJ)
On-Board LAN: Built-n Marvell 8001 (10/100/1000 Mbit)
Chipset: nVIDIA nForce 3 250
I tried this after reading some other threads:
my64:~# modprobe forcedeth
/lib/modules/2.4.27-1-386/kernel/drivers/net/forcedeth.o: init_module:
No such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.27-1-386/kernel/drivers/net/forcedeth.o: insmod
/lib/modules/2.4.27-1-386/kernel/drivers/net/forcedeth.o failed
/lib/modules/2.4.27-1-386/kernel/drivers/net/forcedeth.o: insmod
forcedeth failed
my64:~# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0F:EA:45:38:CB
inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:19 Memory:fb000000-0
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:873 errors:0 dropped:0 overruns:0 frame:0
TX packets:873 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:48892 (47.7 KiB) TX bytes:48892 (47.7 KiB)
ppp0 Link encap:Point-to-Point Protocol
inet addr:203.134.7.60 P-t-P:203.134.66.21
Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:4756 errors:0 dropped:0 overruns:0 frame:0
TX packets:4799 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:3214148 (3.0 MiB) TX bytes:449707 (439.1 KiB)
my64:~#
Thanks,
Norv
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
