Package: installation-reports INSTALL REPORT
Debian-installer-version: http://debian-amd64.alioth.debian.org/install-images/sid-amd64-netinst.iso 26 Oct 2004 uname -a: Date: Nov 17 2004 Method: Downloaded sid-amd64-netinst.iso, burnt to CD, booted from CD Machine: Home assembled Processor: AMD Athlon 64 3000+ Memory: 2 x 512MB Geil PC3200 400MHz DDR Dual Channel, total 1024MB Root Device: hde Seagate ST380013AS SATA 80GB 7200rpm 8MB cache Root Size/partition table: Install got stuck at partitioniong: "No partitionable media found." Output of lspci and lspci -n: [EMAIL PROTECTED]:~$ lspci 0000:00:00.0 Host bridge: nVidia Corporation: Unknown device 00e1 (rev a1) 0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00e0 (rev a2) 0000:00:01.1 SMBus: nVidia Corporation: Unknown device 00e4 (rev a1) 0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 00e7 (rev a1) 0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 00e7 (rev a1) 0000:00:02.2 USB Controller: nVidia Corporation: Unknown device 00e8 (rev a2) 0000:00:06.0 Multimedia audio controller: nVidia Corporation: Unknown device 00ea (rev a1) 0000:00:08.0 IDE interface: nVidia Corporation: Unknown device 00e5 (rev a2) 0000:00:0a.0 IDE interface: nVidia Corporation: Unknown device 00e3 (rev a2) 0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 00e2 (rev a2) 0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 00ed (rev a2) 0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge 0000:01:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 4000 AGP 8x] (rev a4) 0000:02:0b.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13) 0000:02:0c.0 RAID bus controller: Integrated Technology Express, Inc. IT/ITE8212 Dual channel ATA RAID controller (PCI version seems to be IT8212, embedded seems (rev 11) 0000:02:0d.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01) 0000:02:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [EMAIL PROTECTED]:~$ lspci -n 0000:00:00.0 0600: 10de:00e1 (rev a1) 0000:00:01.0 0601: 10de:00e0 (rev a2) 0000:00:01.1 0c05: 10de:00e4 (rev a1) 0000:00:02.0 0c03: 10de:00e7 (rev a1) 0000:00:02.1 0c03: 10de:00e7 (rev a1) 0000:00:02.2 0c03: 10de:00e8 (rev a2) 0000:00:06.0 0401: 10de:00ea (rev a1) 0000:00:08.0 0101: 10de:00e5 (rev a2) 0000:00:0a.0 0101: 10de:00e3 (rev a2) 0000:00:0b.0 0604: 10de:00e2 (rev a2) 0000:00:0e.0 0604: 10de:00ed (rev a2) 0000:00:18.0 0600: 1022:1100 0000:00:18.1 0600: 1022:1101 0000:00:18.2 0600: 1022:1102 0000:00:18.3 0600: 1022:1103 0000:01:00.0 0300: 10de:0185 (rev a4) 0000:02:0b.0 0200: 11ab:4320 (rev 13) 0000:02:0c.0 0104: 1283:8212 (rev 11) 0000:02:0d.0 0104: 1095:3512 (rev 01) 0000:02:0e.0 0c00: 104c:8024 [EMAIL PROTECTED]:~$ Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [E ] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: First I tried i386 sarge with 2.6 kernel, cds dated Oct 15 2004. Install stopped at partitioning: "No partitionable media found" Then tried i386 sarge with 2.4: Install got right thru to tasksel and got stuck. I installed gdm, gnome, x-windows-system with aptitude and then tasksel worked to get the rest of the Desktop stuff. Sound and network not working as reported (by Axel?) on debian-amd64 list yesterday. This is the system I am writing this on. Then downloaded sid-amd64-netinst.iso and tried to boot from the cd i made. Install got stuck again at partitioning. Tried booting with the hd=stx bla bla option to see if that would work with the Seagate hd. Got stuck at partitioning again. Do I have to put hd=st380013as or is it OK to put hd=stx??? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
