Package: installation-reports
Debian-installer-version: 2004/11/10 daily image from http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20041111/sarge-i386-netinst.iso
uname -a: <The result of running uname -a on a shell prompt>
Date: 2004/11/10
Method: netinst + network, booted off CD-ROM, debian.yorku.ca not proxied
Machine: Asus A7N8X-E motherboard Processor: AMD Athlon(tm) XP 2500+ Memory: 1 GB Root Device: /dev/hda 40GB IDE Root Size/partition table: Disk /dev/hda: 40.0 GB, 40027029504 bytes 16 heads, 63 sectors/track, 77557 cylinders Units = cylinders of 1008 * 512 = 516096 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 48307 24346476 7 HPFS/NTFS (WinXP Pro)
Partition 1 does not end on cylinder boundary.
/dev/hda2 48307 61296 6546487+ 7 HPFS/NTFS (data)
Partition 2 does not end on cylinder boundary.
/dev/hda3 61297 75441 7129080 83 Linux (root)
/dev/hda4 75442 77557 1066464 83 Linux (swap)
/dev/hde 120GB SATA (unused for now)
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1)
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller (rev a1)
0000:00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia audio [Via VT82C686B] (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 AudioControler (MCP) (rev a1)
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE 1394) Controller (rev a3)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
0000:01:04.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
0000:01:0b.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology Inc) SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 02)
0000:03:00.0 VGA compatible controller: ATI Technologies Inc RV350 AP [Radeon 9600]
0000:03:00.1 Display controller: ATI Technologies Inc RV350 AP [Radeon 9600] (Secondary)
0000:00:00.0 0600: 10de:01e0 (rev c1) 0000:00:00.1 0500: 10de:01eb (rev c1) 0000:00:00.2 0500: 10de:01ee (rev c1) 0000:00:00.3 0500: 10de:01ed (rev c1) 0000:00:00.4 0500: 10de:01ec (rev c1) 0000:00:00.5 0500: 10de:01ef (rev c1) 0000:00:01.0 0601: 10de:0060 (rev a4) 0000:00:01.1 0c05: 10de:0064 (rev a2) 0000:00:02.0 0c03: 10de:0067 (rev a4) 0000:00:02.1 0c03: 10de:0067 (rev a4) 0000:00:02.2 0c03: 10de:0068 (rev a4) 0000:00:04.0 0200: 10de:0066 (rev a1) 0000:00:05.0 0401: 10de:006b (rev a2) 0000:00:06.0 0401: 10de:006a (rev a1) 0000:00:08.0 0604: 10de:006c (rev a3) 0000:00:09.0 0101: 10de:0065 (rev a2) 0000:00:0d.0 0c00: 10de:006e (rev a3) 0000:00:1e.0 0604: 10de:01e8 (rev c1) 0000:01:04.0 0200: 11ab:4320 (rev 13) 0000:01:0b.0 0104: 1095:3112 (rev 02) 0000:03:00.0 0300: 1002:4150 0000:03:00.1 0380: 1002:4170
Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [E+O] (see below) Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O]
Comments/Problems:
Booting with the 2.4 kernel failed.
The first install attempt was by booting the 2.4 kernel from CD. After selecting Country and Language, the installer hung at "Loading module 'sd_mod' for SCSI disk support..." (I do have a 120GB SATA disk which I will use for another install later).
Booting with linux26 succeeded and correctly gave three ethernet interfaces: eth0: NVidia Corp nForce2 eth1: Galileo Tech Ltd. Yukon Gigabit Ethernet eth2: Firewire ethernet
Partition table was manually edited to re-use the partitions from a previous Debian install.
Selected "Desktop" in 2nd stage and got working video (ATI Radeon 9600 Pro) and working sound, too.
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
