Package: installation-reports INSTALL REPORT
Debian-installer-version: pre-rc2, 5/11/2004 http://cdimage.debian.org/ pub/cdimage-testing/sid_d-i/i386/pre-rc2/sarge-i386-netinst.iso uname -a: 2.4.27-1-686-smp #1 SMP Fri Sep 3 06:34:36 UTC 2004 i686 GNU/Linux Date: 5/11/2004 Method: CD-ROM boot of Debian-installer pre-rc2 Machine: Custom Build Processor: Dual Xeon 2.4 Ghz (Hyperthreading) Memory: 1024 Mb Root Device: /dev/hda1 Root Size/partition table: proc /proc proc defaults 0 0 /dev/hda4 / ext3 defaults,errors=remount-ro 0 1 /dev/hda1 /boot ext3 defaults 0 2 /dev/hda3 /var ext3 defaults 0 2 /dev/hda5 none swap sw 0 0 /dev/hdd /media/cdrom0 iso9660 ro,user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 /dev/sda1 /raid ext3 # 12x160Gb SATA disks, RAID10 Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. E7501 Memory Controller Hub (rev 01) 0000:00:00.1 ff00: Intel Corp. E7500/E7501 Host RASUM Controller (rev 01) 0000:00:02.0 PCI bridge: Intel Corp. E7500/E7501 Hub Interface B PCI-to-PCI Bridge (rev 01) 0000:00:1d.0 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #1) (rev 02) 0000:00:1d.1 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #2) (rev 02) 0000:00:1d.2 USB Controller: Intel Corp. 82801CA/CAM USB (Hub #3) (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 42) 0000:00:1f.0 ISA bridge: Intel Corp. 82801CA LPC Interface Controller (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801CA Ultra ATA Storage Controller (rev 02) 0000:01:1c.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) 0000:01:1d.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) 0000:01:1e.0 PIC: Intel Corp. 82870P2 P64H2 I/OxAPIC (rev 04) 0000:01:1f.0 PCI bridge: Intel Corp. 82870P2 P64H2 Hub PCI Bridge (rev 04) 0000:02:04.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 01) 0000:02:05.0 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) 0000:02:05.1 SCSI storage controller: Adaptec AIC-7902B U320 (rev 10) 0000:03:03.0 Ethernet controller: Intel Corp. 82544GC Gigabit Ethernet Controller (LOM) (rev 02) 0000:04:01.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02) 0000:04:02.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) ---- 0000:00:00.0 0600: 8086:254c (rev 01) 0000:00:00.1 ff00: 8086:2541 (rev 01) 0000:00:02.0 0604: 8086:2543 (rev 01) 0000:00:1d.0 0c03: 8086:2482 (rev 02) 0000:00:1d.1 0c03: 8086:2484 (rev 02) 0000:00:1d.2 0c03: 8086:2487 (rev 02) 0000:00:1e.0 0604: 8086:244e (rev 42) 0000:00:1f.0 0601: 8086:2480 (rev 02) 0000:00:1f.1 0101: 8086:248b (rev 02) 0000:01:1c.0 0800: 8086:1461 (rev 04) 0000:01:1d.0 0604: 8086:1460 (rev 04) 0000:01:1e.0 0800: 8086:1461 (rev 04) 0000:01:1f.0 0604: 8086:1460 (rev 04) 0000:02:04.0 0104: 13c1:1001 (rev 01) 0000:02:05.0 0100: 9005:801d (rev 10) 0000:02:05.1 0100: 9005:801d (rev 10) 0000:03:03.0 0200: 8086:100d (rev 02) 0000:04:01.0 0200: 8086:100e (rev 02) 0000:04:02.0 0300: 1002:4752 (rev 27) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [E] Install boot loader: [O] Reboot: [O] Comments/Problems: base-config -> tasksel -s : The following packages have unmet dependencies: libreadline-common: Conflicts: libreadline4 (< 4.3-13) but 4.3-11 is to be installed -> solved by installing version 4.3-14 (unstable dist) Recompiling kernel to add SMP support: Using kernel-source-2.4.27, no SMP option available in .config file. Manually adding in CONFIG_SMP=y and running menuconfig triggers CONFIG_NR_CPUS option to become available, but still the SMP option not visible. Running make-kpkg OK, but dpkg -i kernel_image does not create any initrd.img. We did not try any further kernel recompilation , but installed instead kernel-image-2.4.27-1-686-smp RAID performance: Running Bonnie on the Raid array using kernel-image-2.4.27-1-686-smp gives an unexpected 5% decrease in I/O compared to using the preinstalled 2.4.27-1-386 kernel. We are still happy: we get 114Mb/s write, 74Mb/s read. If you wish more info on this, please let me know. 'Ghost' devices on boot: Discover finds non-existent ich2rom device. Best regards, Peter Sorensen Nordic Optical Telescope -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
