Package: installation-reports Severity: normal INSTALL REPORT
Debian-installer-version: http://people.debian.org/~joeyh/d-i/images/2004-11-06/netboot/netboot.tar.gz uname -a: std debian 2.6.8 kernel Date: 07/11/2004 Method: PXEboot Machine: Dell Optiplex GX280 Processor: PIV 2.8Ghz Memory: 512Mo Root Device: /dev/hda Root Size/partition table: # sfdisk -l /dev/hda Disk /dev/hda: 4863 cylinders, 255 heads, 63 sectors/track Units = cylinders of 8225280 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End #cyls #blocks Id System /dev/hda1 0+ 61 62- 497983+ 82 Linux swap /dev/hda2 * 62 1277 1216 9767520 83 Linux /dev/hda3 0 - 0 0 0 Empty /dev/hda4 0 - 0 0 0 Empty Output of lspci and lspci -n: # lspci 0000:00:00.0 Host bridge: Intel Corp. 915G/P/GV Processor to I/O Controller (rev 04) 0000:00:01.0 PCI bridge: Intel Corp. 915G/P/GV PCI Express Root Port (rev 04) 0000:00:02.0 VGA compatible controller: Intel Corp. 82915G Express Chipset Family Graphics Controller (rev 04) 0000:00:02.1 Display controller: Intel Corp. 82915G Express Chipset Family Graphics Controller (rev 04) 0000:00:1c.0 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 03) 0000:00:1c.1 PCI bridge: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 (rev 03) 0000:00:1d.0 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) 0000:00:1d.1 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 03) 0000:00:1d.2 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 03) 0000:00:1d.3 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 03) 0000:00:1d.7 USB Controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 03) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev d3) 0000:00:1e.2 Multimedia audio controller: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03) 0000:00:1f.0 ISA bridge: Intel Corp. 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge (rev 03) 0000:00:1f.2 IDE interface: Intel Corp. 82801FB/FW (ICH6/ICH6W) SATA Controller (rev 03) 0000:00:1f.3 SMBus: Intel Corp. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 03) 0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01) # lspci -n 0000:00:00.0 0600: 8086:2580 (rev 04) 0000:00:01.0 0604: 8086:2581 (rev 04) 0000:00:02.0 0300: 8086:2582 (rev 04) 0000:00:02.1 0380: 8086:2782 (rev 04) 0000:00:1c.0 0604: 8086:2660 (rev 03) 0000:00:1c.1 0604: 8086:2662 (rev 03) 0000:00:1d.0 0c03: 8086:2658 (rev 03) 0000:00:1d.1 0c03: 8086:2659 (rev 03) 0000:00:1d.2 0c03: 8086:265a (rev 03) 0000:00:1d.3 0c03: 8086:265b (rev 03) 0000:00:1d.7 0c03: 8086:265c (rev 03) 0000:00:1e.0 0604: 8086:244e (rev d3) 0000:00:1e.2 0401: 8086:266e (rev 03) 0000:00:1f.0 0601: 8086:2640 (rev 03) 0000:00:1f.2 0101: 8086:2651 (rev 03) 0000:00:1f.3 0c05: 8086:266a (rev 03) 0000:02:00.0 0200: 14e4:1677 (rev 01) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [E] Comments/Problems: The Dell optiplex GX280 are the new professional desktop from Dell for the year to come. Those boxen are USB only (no more ps2 ports) and the HD are sata drives with an IDE compatibility mode in BIOS. This installation was with the BIOS in native SATA mode and the linux26 flavour + USB keyboard. The installation went OK until the first reboot where I get stuck in rcS.d/S18hwclockfirst.sh. At this point I didn't have any keyboard (module loaded later) either. Pretty messy. It seems hwclock needs the rtc module to be loaded to do whatever it is expected to do. @+, Fab -- System Information: Debian Release: 3.1 APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.4.27-caladan Locale: LANG=C, LC_CTYPE=C -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
