Package: installation-reports Debian-installer-version: http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20041103/sarge-i386-netinst.iso uname -a: not sure, 2.6.8? (2.6 something anyway) Date: 2004-11-04 Method: netinst cd, booted from cd
Machine: Dell PowerEdge 1800 Processor: dual Xeon 3Ghz Memory: 2Gig Root Device: SATA Output of lspci and lspci -n: 0000:00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 09) 0000:00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port A0 (rev 09) 0000:00:04.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port B0 (rev 09) 0000:00:06.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port C0 (rev 09) 0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) 0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) 0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) 0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) 0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) 0000:00:1f.2 RAID bus controller: Intel Corp. 82801EB (ICH5R) SATA (cc=RAID) (rev 02) 0000:01:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09) 0000:01:00.1 PIC: Intel Corp. PCI Bridge Hub I/OxAPIC Interrupt Controller A (rev 09) 0000:01:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09) 0000:01:00.3 PIC: Intel Corp. PCI Bridge Hub I/OxAPIC Interrupt Controller B (rev 09) 0000:02:04.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 08) 0000:02:05.0 Ethernet controller: Intel Corp. 82545GM Gigabit Ethernet Controller (rev 04) 0000:03:07.0 Ethernet controller: Intel Corp. 82541GI/PI Gigabit Ethernet Controller (rev 05) 0000:06:05.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] 0000:00:00.0 0600: 8086:3590 (rev 09) 0000:00:02.0 0604: 8086:3595 (rev 09) 0000:00:04.0 0604: 8086:3597 (rev 09) 0000:00:06.0 0604: 8086:3599 (rev 09) 0000:00:1d.0 0c03: 8086:24d2 (rev 02) 0000:00:1d.1 0c03: 8086:24d4 (rev 02) 0000:00:1d.2 0c03: 8086:24d7 (rev 02) 0000:00:1d.7 0c03: 8086:24dd (rev 02) 0000:00:1e.0 0604: 8086:244e (rev c2) 0000:00:1f.0 0601: 8086:24d0 (rev 02) 0000:00:1f.1 0101: 8086:24db (rev 02) 0000:00:1f.2 0104: 8086:24df (rev 02) 0000:01:00.0 0604: 8086:0329 (rev 09) 0000:01:00.1 0800: 8086:0326 (rev 09) 0000:01:00.2 0604: 8086:032a (rev 09) 0000:01:00.3 0800: 8086:0327 (rev 09) 0000:02:04.0 0100: 1000:0030 (rev 08) 0000:02:05.0 0200: 8086:1026 (rev 04) 0000:03:07.0 0200: 8086:1076 (rev 05) 0000:06:05.0 0300: 1002:5159 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [E] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: Installer didn't recognize the SATA controller. Managed to install woody using http://oregonstate.edu/~kveton/debian/ Upgrading to sarge, the controler is recognized with kernel image 2.6.8-1-686-smp: oregano:~# uname -a Linux oregano 2.6.8-1-686-smp #1 SMP Thu Oct 7 01:53:29 EDT 2004 i686 GNU/Linux oregano:~# lsmod Module Size Used by ipv6 281636 17 dm_mod 61088 0 capability 4744 0 commoncap 7552 1 capability e1000 86884 0 rtc 14184 0 ext3 129640 2 jbd 70520 1 ext3 mbcache 10340 1 ext3 sd_mod 22144 4 mptscsih 44988 0 mptbase 49088 1 mptscsih ata_piix 8420 3 libata 42020 1 ata_piix scsi_mod 127972 3 sd_mod,mptscsih,libata unix 31092 162 font 8544 0 vesafb 6880 0 cfbcopyarea 4064 1 vesafb cfbimgblt 3264 1 vesafb cfbfillrect 4000 1 vesafb -- PGP signed and encrypted | .''`. ** Debian GNU/Linux ** messages preferred. | : :' : The universal | `. `' Operating System http://www.palfrader.org/ | `- http://www.debian.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
