Package: installation-reports
Debian-installer-version: 06.Oct.2004 http://cdimage.debian.org/pub/cdimage-testing/daily/i386/
uname -a: 2.6.9
Date: 7.Oct.2004
Method: Install and boot from businesscard-CD without Proxy over DSL (DHCP)
Machine: Gigabyte 7N400E-L SocketA
Processor: AMD Duron 1330MHz
Memory: 512MB DDR MDT PC400 CL2,5 DoubleSided
Root Device: IDE 80GB Maxtor D740X-6L
Root Size/partition table: hda1 Boot Primary NTFS 32GB hda5 Logical FAT32 21GB hda3 Primary Swap 1,2GB hda4 Primary ext3 25GB
Output of lspci and lspci -n:
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?) (rev c1) 0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 0 (rev c1) 0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1) 0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1) 0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1) 0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1) 0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4) 0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) 0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) 0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) 0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4) 0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio Controler (MCP) (rev a1) 0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3) 0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2) 0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) 0000:01:06.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) 0000:01:08.0 Multimedia video controller: Vidac Electronics GmbH: Unknown device 0001 (rev 01) 0000:01:09.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 12) 0000:01:0a.0 SCSI storage controller: LSI Logic / Symbios Logic 53c860 (rev 02) 0000:01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:02:00.0 VGA compatible controller: nVidia Corporation NV5 [RIVA TNT2 Ultra] (rev 11)
0000:00:00.0 0600: 10de:01e0 (rev c1) 0000:00:00.1 0500: 10de:01ea (rev c1) 0000:00:00.2 0500: 10de:01ee (rev c1) 0000:00:00.3 0500: 10de:01ed (rev c1) 0000:00:00.4 0500: 10de:01ec (rev c1) 0000:00:00.5 0500: 10de:01ef (rev c1) 0000:00:01.0 0601: 10de:0060 (rev a4) 0000:00:01.1 0c05: 10de:0064 (rev a2) 0000:00:02.0 0c03: 10de:0067 (rev a4) 0000:00:02.1 0c03: 10de:0067 (rev a4) 0000:00:02.2 0c03: 10de:0068 (rev a4) 0000:00:06.0 0401: 10de:006a (rev a1) 0000:00:08.0 0604: 10de:006c (rev a3) 0000:00:09.0 0101: 10de:0065 (rev a2) 0000:00:1e.0 0604: 10de:01e8 (rev c1) 0000:01:06.0 0200: 10b7:9200 (rev 74) 0000:01:08.0 0400: 156c:0001 (rev 01) 0000:01:09.0 0400: 109e:0350 (rev 12) 0000:01:0a.0 0100: 1000:0006 (rev 02) 0000:01:0b.0 0200: 10ec:8139 (rev 10) 0000:02:00.0 0300: 10de:0029 (rev 11)
Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [0] Configure network HW: [0] Config network: [0] Detect CD: [0] Load installer modules: [0] Detect hard drives: [0] Partition hard drives: [0] Create file systems: [0] Mount partitions: [0] Install base system: [0] Install boot loader: [0] Reboot: [0]
Comments/Problems:
The option "Desktop System" is very bad while it install KDE+Gnome completely.
I wish a seperate option vor KDE and Gnome or a referance. In the normal installation
i can't choose lilo as boot-agent this option is only in the expert installation.
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
