On Wed, Oct 20, 2004 at 01:30:38PM +0200, Christian Perrier wrote: > Quoting Andrew Pollock ([EMAIL PROTECTED]): > > > That's a shame. I would have thought it'd be relatively easy to implement, > > but I haven't given the innards of what's involved close inspection... > > Well, the non easiest thing is maybe getting someone volunteering for > implementing this..:-) >
:-) Patch attached. Will submit it to the BTS shortly. I'm doing some tests with qemu, but it's slooow. Would appreciate some testing by others... regards Andrew -- linux.conf.au 2005 - http://lca2005.linux.org.au/ - Birthplace of Tux April 18th to 23rd - http://lca2005.linux.org.au/ - LINUX Canberra, Australia - http://lca2005.linux.org.au/ - Get bitten!
Common subdirectories: mdcfg-1.06/debian and mdcfg-1.07/debian
diff -u mdcfg-1.06/mdcfg.sh mdcfg-1.07/mdcfg.sh
--- mdcfg-1.06/mdcfg.sh 2004-09-30 05:59:27.000000000 +1000
+++ mdcfg-1.07/mdcfg.sh 2004-10-24 14:15:30.000000000 +1000
@@ -222,19 +222,12 @@
db_get mdcfg/raid1sparecount
SPARE_COUNT="${RET}"
REQUIRED=$(($DEV_COUNT + $SPARE_COUNT))
- if [ "$REQUIRED" -gt "$NUM_PART" ] ; then
- db_subst mdcfg/notenoughparts NUM_PART "${NUM_PART}"
- db_subst mdcfg/notenoughparts REQUIRED "${REQUIRED}"
- db_input critical mdcfg/notenoughparts
- db_go mdcfg/notenoughparts
- return
- fi
db_set mdcfg/raid1devs ""
SELECTED=0
- # Loop until the correct amount of active devices has been selected
- while [ "${SELECTED}" -ne "${DEV_COUNT}" ]; do
+ # Loop until at least one device has been selected
+ until [ "${SELECTED}" -gt "0" -a "${SELECTED}" -le "${DEV_COUNT}" ]; do
db_subst mdcfg/raid1devs COUNT "${DEV_COUNT}"
db_subst mdcfg/raid1devs PARTITIONS "${PARTITIONS}"
db_input critical mdcfg/raid1devs
@@ -251,6 +244,12 @@
done
done
+ # Add "missing" for as many devices as weren't selected
+ while [ "${SELECTED}" -lt "${DEV_COUNT}" ]; do
+ MISSING_DEVICES="${MISSING_DEVICES} missing"
+ let SELECTED++
+ done
+
# Remove partitions selected in raid1devs from the PARTITION list
db_get mdcfg/raid1devs
@@ -310,7 +309,7 @@
echo "Raid devices count: ${DEV_COUNT}"
echo "Spare devices count: ${SPARE_COUNT}"
echo "Commandline:"
- `mdadm --create /dev/md/${MD_NUM} --force -R -l raid1 -n ${DEV_COUNT} -x
${SPARE_COUNT} ${RAID_DEVICES} ${SPARE_DEVICES} ${MISSING_SPARES}`
+ `mdadm --create /dev/md/${MD_NUM} --force -R -l raid1 -n ${DEV_COUNT} -x
${SPARE_COUNT} ${RAID_DEVICES} ${MISSING_DEVICES} ${SPARE_DEVICES} ${MISSING_SPARES}`
}
md_create_raid5() {
Only in mdcfg-1.07/: .mdcfg.sh.swp
signature.asc
Description: Digital signature
