Package: installation-reports Debian-installer-version: pre-rc2 for i386 from www.debian.org/devel/debian-installer uname -a: Linux sagittarius 2.6.8-1-386 #1 Thu Oct 7 02:21:16 EDT 2004 i586 GNU/Linux
Date: 18 oct, apprx. 10.00-12.00 UTC Method: Netinst cd, from ftp.nl.debian.org with apt-proxy at nebula.homeunix.net. Machine: Fujitsu Siemens Liteline Processor: AMD K6-III 500Mhz Memory: 64 Mb Root Device: IDE, hda Root Size/partition table: Disk /dev/hda: 5000 MB, 5000970240 bytes 15 heads, 63 sectors/track, 10336 cylinders Units = cylinders of 945 * 512 = 483840 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 9974 4712683+ 83 Linux /dev/hda2 9975 10336 171045 f W95 Ext'd (LBA) /dev/hda5 9975 10336 171013+ 82 Linux swap /dev/hda1 on / type ext3 (rw,errors=remount-ro) Output of lspci and lspci -n: 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8501 [Apollo MVP4] (rev 04) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8501 [Apollo MVP4 AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 22) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 10) 0000:00:07.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 10) 0000:00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 30) 0000:00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6812 Cardbus Controller (rev 05) 0000:00:0d.0 Multimedia audio controller: ESS Technology ES1983S Maestro-3i PCI Audio Accelerator 0000:00:0d.1 Communication controller: ESS Technology ES1983S Maestro-3i PCI Modem Accelerator 0000:01:00.0 VGA compatible controller: Trident Microsystems CyberBlade/i7d (rev 5d) 0000:00:00.0 0600: 1106:0501 (rev 04) 0000:00:01.0 0604: 1106:8501 0000:00:07.0 0601: 1106:0686 (rev 22) 0000:00:07.1 0101: 1106:0571 (rev 10) 0000:00:07.2 0c03: 1106:3038 (rev 10) 0000:00:07.4 0680: 1106:3057 (rev 30) 0000:00:0a.0 0607: 1217:6872 (rev 05) 0000:00:0d.0 0401: 125d:1998 0000:00:0d.1 0780: 125d:1999 0000:01:00.0 0300: 1023:8420 (rev 5d) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [E] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: I'm sorry I had to put an 'E' at initial boot. There was not a major problem, but since we want to promote Debian: the isolinux graphical boot screen was severely scrambled to the point that the clueless won't know what to do. Of course, he'll try the enter key, but he won't know anything about the possible boot options (linux26, for example). This machine is about 5 years old and has a Trident Cyberblade i7 on board. However, there's nothing wrong with booting linux with vesafb with vga=0x315, so I don't really know what went wrong. Apart from this, I was very impressed by the new installer! Only 'problems' I had, were with tasksel (strange combinations of software installed). I won't bother you with that. Thanks for all the good work! David -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
