Package: installation-reports INSTALL REPORT
Debian-installer-version: netinst 20041007 from http://cdimage.debian.org/pub/cdimage-testing/daily/sparc/20041007/sarge-sparc-netinst.iso (md5sum b370379763a9e7efbe3439ab5c16113e ) uname -a: 2.4.27 Date: 20040 10 08 Method: hit L1-A after openboot banner appears type 'boot cdrom' in OpenBoot Prom 4.0 type <return> to start installer Machine: Sun Ultra 10 UPA/PCI OpenBoot 3.25 Processor: UltraSPARC-IIi 440MHz Memory: 256Mb (50ns) Root Device: IDE Root Size/partition table: Output of lspci and lspci -n: Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [E] Configure network HW: [ ] Config network: [ ] Detect CD: [ ] Load installer modules: [ ] Detect hard drives: [ ] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: It appears the installer cannot read Sun partition tables? The partition table is from Solaris2.6. Logs, or as much as I could transcribe: .... Uniform Multi-platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes: override with idebus=xx CMD646: IDE controller at PCI slot 01:03.0 CMD646: chipset revision 3 CMD646: chipset revision 0x03, MultiWord DMA Force Limited ide0: BM-DMA at 0x1fe02c00020-0x1fe02c00027, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x1fe02c00028-0x1fe02c0002f, BIOS settings: hdc:pio, hdd:pio CMD646: 100% native mode on irq4,7e0 hda: ST39111A, ATA Disk drive ide: Assuming 33MHz system bus speed for PIO modes: override with idebus=xx hdc: CRD-8322B, ATAPI CD/DVD-ROM drive ide0 at 0x1fe02c00007,0x1fe02c0000a on irq 4,7e8 ide1 at 0x1fe02c00017,0x1fe02c0001a on irq 4,7e0 (shared with ide0) Partion check: hda:end_request: I/O error, dev 03:00 (hda) sector 0 end_request: I/0 error, dev 03:00 (hda), sector 2 end_request: I/0 error, dev 03:00 (hda), sector 4 end_request: I/0 error, dev 03:00 (hda), sector 6 end_request: I/0 error, dev 03:00 (hda), sector 8 end_request: I/0 error, dev 03:00 (hda), sector 10 end_request: I/0 error, dev 03:00 (hda), sector 12 end_request: I/0 error, dev 03:00 (hda), sector 14 end_request: I/0 error, dev 03:00 (hda), sector 2 end_request: I/0 error, dev 03:00 (hda), sector 4 end_request: I/0 error, dev 03:00 (hda), sector 6 end_request: I/0 error, dev 03:00 (hda), sector 8 end_request: I/0 error, dev 03:00 (hda), sector 10 end_request: I/0 error, dev 03:00 (hda), sector 12 end_request: I/0 error, dev 03:00 (hda), sector 14 unable to read partition table usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb.c: registered new driver usbmouse usbmouse.c: v1.6:USB HID Boot Protocol mouse driver usb.c: registered new driver usbkbd usbkbd.c: USB HID Boot Protocol keyboard driver mice: PS/2 mouse device common for all mice Initializing Cryptographic API NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tabels configured (established 32768 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0 RAMDISK: couldn't find valid RAM disk image starting at 0 Freeing initrd memory: 2823k freed cramfs: wrong magic Kernel panic: VFS: Unable to mount root fs on 00:00 Press L1-A to return to the boot prom At this point the keyboard is at least still working. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
