Package: installation-reports

Debian-installer-version: Daily business card snapshot from 10/06/2004 from http://gluck.debian.org/cdimage/testing/daily/powerpc/20041006/
uname -a: Linux finn 2.6.8-powerpc #1 Tue Sep 14 00:15:52 CEST 2004 ppc GNU/Linux
Date: 10/08/2004 23:45
Method: Boot from CD by holding down C key after chime; installed as install-powerpc


Machine: Apple Titanium PowerBook G4 500MHz
Processor: PowerPC G4 500MHz
Memory: 512MB
Root Device: IDE1 master (hda) - 20.0 GB TOSHIBA MK2016GAP
Root Size/partition table:
IDE1 master (hda) - 20.0 GB TOSHIBA MK2016GAP
      #1  32.3kB                 Apple
      #2  27.6kB                 Macintosh
      #3  37.9kB                 Macintosh
      #4  27.6kB                 Macintosh
      #5  37.9kB                 Macintosh
      #6 102.4kB                 Macintosh
      #7 262.1kB                 Macintosh
      #8 262.1kB                 Patch Partit
      #9 819.2kB      boot       bootstrap
     #10   1.0GB      swap       swap         swap
     #11   9.7GB      ext3       root         /
     #12   6.0GB      hfs+       OS X
     #13   3.2GB      hfs+       OS 9
          11.3kB      FREE SPACE

Output of lspci and lspci -n:

0000:00:0b.0 Host bridge: Apple Computer Inc. UniNorth AGP
0000:00:10.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
0001:01:0b.0 Host bridge: Apple Computer Inc. UniNorth PCI
0001:01:17.0 ff00: Apple Computer Inc. KeyLargo Mac I/O (rev 03)
0001:01:18.0 USB Controller: Apple Computer Inc. KeyLargo USB
0001:01:19.0 USB Controller: Apple Computer Inc. KeyLargo USB
0001:01:1a.0 CardBus bridge: Texas Instruments PCI1211
0002:06:0b.0 Host bridge: Apple Computer Inc. UniNorth Interal PCI
0002:06:0e.0 FireWire (IEEE 1394): Apple Computer Inc. UniNorth FireWire (rev 01)
0002:06:0f.0 Ethernet controller: Apple Computer Inc. UniNorth GMAC (Sun GEM) (rev 01)


0000:00:0b.0 0600: 106b:0020
0000:00:10.0 0300: 1002:4c46 (rev 02)
0001:01:0b.0 0600: 106b:001f
0001:01:17.0 ff00: 106b:0022 (rev 03)
0001:01:18.0 0c03: 106b:0019
0001:01:19.0 0c03: 106b:0019
0001:01:1a.0 0607: 104c:ac1e
0002:06:0b.0 0600: 106b:001e
0002:06:0e.0 0c00: 106b:0018 (rev 01)
0002:06:0f.0 0200: 106b:0021 (rev 01)

Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it

Initial boot worked:    [O]
Configure network HW:   [O]
Config network:         [O]
Detect CD:              [O]
Load installer modules: [O]
Detect hard drives:     [O]
Partition hard drives:  [O]
Create file systems:    [O]
Mount partitions:       [O]
Install base system:    [O]
Install boot loader:    [O]
Reboot:                 [O]

Comments/Problems:
This is the same machine and install image used on the following installation reports:


http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=275421
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=275427

The primary differences in the install were that install-powerpc was chosen on this install instead of expert-powerpc and debian.mirrors.pair.com was chosen on this install instead of ftp-linux.cc.gatech.edu.



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]



Reply via email to