Package: installation-reports
INSTALL REPORT
Debian-installer-version: pre-rc2 sarge-i386-businesscard.iso
uname -a: Linux alfred 2.6.6-1-k7 #1 Wed May 12 18:19:40 EST 2004 i686 GNU/Linux
Date: 2-OCT-2004 16:00
Method: boot from CD, entering 'linux26', packages from
ftp.de.debian.org with local HTTP proxy
Machine: made from components. Peculiarities: ethernet+firewire,
IDE + SCSI disks, onboard USB 1.1 + extra USB 2.0
Processor: Athlon 1800+
Memory: 512 MByte
Root Device: /dev/hdd
Disk /dev/hdd: 10.2 GB, 10260710400 bytes
255 heads, 63 sectors/track, 1247 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hdd1 * 1 510 4096543+ b W95 FAT32
/dev/hdd2 511 1247 5919952+ 5 Extended
/dev/hdd5 511 767 2064321 b W95 FAT32
/dev/hdd6 1175 1247 586341 83 Linux
/dev/hdd7 768 798 248976 82 Linux swap
/dev/hdd8 * 799 1174 3020188+ 83 Linux
Partition table entries are not in disk order
output of lspci:
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
0000:00:09.0 PCI bridge: Hint Corp HB6 Universal PCI-PCI bridge (non-transparent mode)
(rev 11)
0000:00:0b.0 SCSI storage controller: Advanced Micro Devices [AMD] 53c974 [PCscsi]
(rev 10)
0000:00:0d.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 04)
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C
PIPC Bus Master IDE (rev 06)
0000:00:11.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 1b)
0000:00:11.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 1b)
0000:00:11.4 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(rev 1b)
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237
AC97 Audio Controller (rev 30)
0000:01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 82)
0000:02:08.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller
(rev 46)
0000:02:09.0 USB Controller: NEC Corporation USB (rev 41)
0000:02:09.1 USB Controller: NEC Corporation USB (rev 41)
0000:02:09.2 USB Controller: NEC Corporation USB 2.0 (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [0]
Comments/Problems:
base install and bare minimum second stage install OK,
but it started with a red screen.
Herbert
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
