Package: installation-reports Debian-installer-version: (http://ftp.acc.umu.se/pub/cd-images/debian-weekly/i386/) uname -a: Linux mangiacaprini 2.4.27-speakup #1 Thu Aug 19 21:46:14 CEST 2004 i686 GNU/Linux Date: 27-Septiembre-2004 - 14:00 Method: Booting from CD - Getting packages from CD (for Debian Base) and from "SUNET" via HTTP for the rest of packages
Machine: Acer TravelMate 8003LMi Processor: Intel Pentium M 1.6 GHz Memory: 512 MB DDR-333 RAM Root Device: TOSHIBA MK6021GAS, ATA/100 60 GB HDD Anti-Shock Protection (DASP) Root Size/partition table: mangiacaprini:~# fdisk /dev/hda The number of cylinders for this disk is set to 7296. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 60.0 GB, 60011642880 bytes 255 heads, 63 sectors/track, 7296 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 6021 48363651 c W95 FAT32 (LBA) /dev/hda2 6022 6531 4096575 83 Linux /dev/hda3 7231 7296 530145 82 Linux swap /dev/hda4 6532 7230 5614717+ 83 Linux Partition table entries are not in disk order Command (m for help): Output of lspci and lspci -n: mangiacaprini:~# lspci 0000:00:00.0 Host bridge: Intel Corp. 82852/855GM Host Bridge (rev 02) 0000:00:00.1 System peripheral: Intel Corp. 855GM/GME GMCH Memory I/O Control Registers (rev 02) 0000:00:00.3 System peripheral: Intel Corp. 855GM/GME GMCH Configuration Process Registers (rev 02) 0000:00:01.0 PCI bridge: Intel Corp. 855GME GMCH Host-to-AGP Bridge (Virtual PCI-to-PCI) (rev 02) 0000:00:1d.0 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03) 0000:00:1d.1 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03) 0000:00:1d.2 USB Controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03) 0000:00:1d.7 USB Controller: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller (rev 03) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev 83) 0000:00:1f.0 ISA bridge: Intel Corp. 82801DBM LPC Interface Controller (rev 03) 0000:00:1f.1 IDE interface: Intel Corp. 82801DBM (ICH4) Ultra ATA Storage Controller (rev 03) 0000:00:1f.3 SMBus: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03) 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03) 0000:00:1f.6 Modem: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] 0000:02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705 Gigabit Ethernet (rev 03) 0000:02:04.0 Network controller: Intel Corp. PRO/Wireless 2200BG (rev 05) 0000:02:06.0 CardBus bridge: O2 Micro, Inc. OZ711M3 SmartCardBus MultiMediaBay Controller 0000:02:06.1 CardBus bridge: O2 Micro, Inc. OZ711M3 SmartCardBus MultiMediaBay Controller 0000:02:06.2 System peripheral: O2 Micro, Inc. OZ711Mx MultiMediaBay Accelerator 0000:02:06.3 CardBus bridge: O2 Micro, Inc. OZ711M3 SmartCardBus MultiMediaBay Controller 0000:02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) mangiacaprini:~# lspci -n 0000:00:00.0 0600: 8086:3580 (rev 02) 0000:00:00.1 0880: 8086:3584 (rev 02) 0000:00:00.3 0880: 8086:3585 (rev 02) 0000:00:01.0 0604: 8086:3581 (rev 02) 0000:00:1d.0 0c03: 8086:24c2 (rev 03) 0000:00:1d.1 0c03: 8086:24c4 (rev 03) 0000:00:1d.2 0c03: 8086:24c7 (rev 03) 0000:00:1d.7 0c03: 8086:24cd (rev 03) 0000:00:1e.0 0604: 8086:2448 (rev 83) 0000:00:1f.0 0601: 8086:24cc (rev 03) 0000:00:1f.1 0101: 8086:24ca (rev 03) 0000:00:1f.3 0c05: 8086:24c3 (rev 03) 0000:00:1f.5 0401: 8086:24c5 (rev 03) 0000:00:1f.6 0703: 8086:24c6 (rev 03) 0000:01:00.0 0300: 1002:4e50 0000:02:02.0 0200: 14e4:1653 (rev 03) 0000:02:04.0 0280: 8086:4220 (rev 05) 0000:02:06.0 0607: 1217:7223 0000:02:06.1 0607: 1217:7223 0000:02:06.2 0880: 1217:7110 0000:02:06.3 0607: 1217:7223 0000:02:07.0 0c00: 104c:8026 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [E] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: When configuring the network address I didn't find option to select DHCP so I needed to modify the /etc/network/interfaces and /etc/dhclient.conf by hand and restart the network (/etc/init.d/networking restart) to continue the instalation. The Hardware detection worked very good (thanks ;) and the X Window system has been configured automatically with no problem. I didn't test the Wireless LAN network card ... I tested the installation with the BCM5705 Gigabit Ethernet. Good Work ! Fernando. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
