Package: installation-reports
Debian-installer-version: Sarge netinst 20040921 i386
downloaded from
http://cdimage.debian.org/pub/cdimage-testing/daily/i386/20040921/sarge-i386-netinst.iso
uname -a: <The result of running uname -a on a shell prompt>
Date: 20040924 03:00 GMT
Method: booted and installed from netinst cd. No network configured.
Booted the default installer kernel, ie <enter> at boot prompt.
Machine: Dell PowerEdge 1750
Processor: dual 2.8GHz Intel P4
Memory: 2Gb
Root Device: /dev/sda
(Hardware raid5 - LSI MegaRAID - across 3 Seagate SCSI disks)
Root Size/partition table:
Disk /dev/sda: 293.3 GB, 293391564800 bytes
255 heads, 63 sectors/track, 35669 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 5 40131 de Dell Utility
/dev/sda2 6 36 249007+ 83 Linux (/)
/dev/sda3 37 279 1951897+ 82 Linux swap
/dev/sda4 280 35669 284270175 5 Extended
/dev/sda5 280 644 2931831 83 Linux (/usr)
/dev/sda6 645 887 1951866 83 Linux (/var)
/dev/sda7 888 1009 979933+ 83 Linux (/tmp)
/dev/sda8 1010 1252 1951866 83 Linux (/srv)
/dev/sda9 1253 1629 3028221 83 Linux (/usr/local)
/dev/sda10 1630 18650 136721151 83 Linux (/export/data1)
/dev/sda11 18651 35669 136705086 83 Linux (/export/data2)
Output of lspci and lspci -n:
lspci -v
0000:00:00.0 Host bridge: ServerWorks CMIC-LE Host Bridge (GC-LE chipset) (rev 33)
Flags: fast devsel
0000:00:00.1 Host bridge: ServerWorks CMIC-LE Host Bridge (GC-LE chipset)
Flags: fast devsel
0000:00:00.2 Host bridge: ServerWorks CMIC-LE Host Bridge (GC-LE chipset)
Flags: fast devsel
0000:00:0e.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if
00 [VGA])
Subsystem: Dell: Unknown device 014a
Flags: bus master, VGA palette snoop, stepping, medium devsel, latency 32
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at ec00 [size=256]
Memory at fe101000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
0000:00:0f.0 Host bridge: ServerWorks CSB5 South Bridge (rev 93)
Subsystem: ServerWorks CSB5 South Bridge
Flags: bus master, medium devsel, latency 32
0000:00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) (prog-if 8a
[Master SecP PriP])
Subsystem: Dell: Unknown device 014a
Flags: bus master, medium devsel, latency 0
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at 08b0 [size=16]
0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 05)
(prog-if 10 [OHCI])
Subsystem: ServerWorks OSB4/CSB5 OHCI USB Controller
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at fe100000 (32-bit, non-prefetchable) [size=4K]
0000:00:0f.3 ISA bridge: ServerWorks CSB5 LPC bridge
Subsystem: ServerWorks: Unknown device 0230
Flags: bus master, medium devsel, latency 0
0000:00:10.0 Host bridge: ServerWorks CIOB-E I/O Bridge with Gigabit Ethernet (rev 12)
Flags: 66MHz, medium devsel
Capabilities: [60] PCI-X non-bridge device.
0000:00:10.2 Host bridge: ServerWorks CIOB-E I/O Bridge with Gigabit Ethernet (rev 12)
Flags: 66MHz, medium devsel
Capabilities: [60] PCI-X non-bridge device.
0000:00:11.0 Host bridge: ServerWorks CIOB-X2 PCI-X I/O Bridge (rev 05)
Flags: 66MHz, medium devsel
Capabilities: [60] PCI-X non-bridge device.
0000:00:11.2 Host bridge: ServerWorks CIOB-X2 PCI-X I/O Bridge (rev 05)
Flags: 66MHz, medium devsel
Capabilities: [60] PCI-X non-bridge device.
0000:01:04.0 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01)
Subsystem: Adaptec AHA-3960D U160/m
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 20
BIST result: 00
I/O ports at dc00 [disabled] [size=256]
Memory at fcf01000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fce00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
0000:01:04.1 SCSI storage controller: Adaptec AHA-3960D / AIC-7899A U160/m (rev 01)
Subsystem: Adaptec AHA-3960D U160/m
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 21
BIST result: 00
I/O ports at d800 [disabled] [size=256]
Memory at fcf00000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fce00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit
Ethernet (rev 02)
Subsystem: Dell: Unknown device 014a
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 16
Memory at fcd30000 (64-bit, non-prefetchable) [size=64K]
Memory at fcd20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device.
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
0000:02:00.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit
Ethernet (rev 02)
Subsystem: Dell: Unknown device 014a
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
Memory at fcd10000 (64-bit, non-prefetchable) [size=64K]
Memory at fcd00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] PCI-X non-bridge device.
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
0000:04:03.0 RAID bus controller: Dell PowerEdge Expandable RAID controller 4/Di (rev
02)
Subsystem: Dell: Unknown device 014a
Flags: bus master, stepping, 66MHz, medium devsel, latency 32, IRQ 18
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Memory at fcb00000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at fca00000 [disabled] [size=128K]
Capabilities: [c0] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable-
Capabilities: [e0] PCI-X non-bridge device.
lspci -n
0000:00:00.0 0600: 1166:0014 (rev 33)
0000:00:00.1 0600: 1166:0014
0000:00:00.2 0600: 1166:0014
0000:00:0e.0 0300: 1002:4752 (rev 27)
0000:00:0f.0 0600: 1166:0201 (rev 93)
0000:00:0f.1 0101: 1166:0212 (rev 93)
0000:00:0f.2 0c03: 1166:0220 (rev 05)
0000:00:0f.3 0601: 1166:0225
0000:00:10.0 0600: 1166:0110 (rev 12)
0000:00:10.2 0600: 1166:0110 (rev 12)
0000:00:11.0 0600: 1166:0101 (rev 05)
0000:00:11.2 0600: 1166:0101 (rev 05)
0000:01:04.0 0100: 9005:00c0 (rev 01)
0000:01:04.1 0100: 9005:00c0 (rev 01)
0000:02:00.0 0200: 14e4:1648 (rev 02)
0000:02:00.1 0200: 14e4:1648 (rev 02)
0000:04:03.0 0104: 1028:000f (rev 02)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O ]
Configure network HW: [O ]
Config network: [ ]
Detect CD: [O ]
Load installer modules: [O ]
Detect hard drives: [O ]
Partition hard drives: [O ]
Create file systems: [O ]
Mount partitions: [O ]
Install base system: [O ]
Install boot loader: [O ]
Reboot: [O ]
Comments/Problems:
Basically flawless, for this simple install path.
I didn't get fancy with LVM & partman.
However fdisk did report on a disk I wasn't expecting it to: sdc
I can't quite understand this. The box has three separate hard disks,
all of which are in a RAID5 set, set up by the onboard RAID controller
It also has a cdrom (/dev/hdc) and a floppy. There is nothing in the
logfiles to suggest how sdc was detected.
I think this device was recognized after I hotplugged a USB key
in, to drag off the logfiles. Could this be a side effect of hotplug
rescanning the SCSI bus? For some reason I didn't capture the dmesg
output, let me know if you want to see it.
Disk /dev/sdc: 1 MB, 1474560 bytes
1 heads, 3 sectors/track, 960 cylinders
Units = cylinders of 3 * 512 = 1536 bytes
Device Boot Start End Blocks Id System
/dev/sdc1 ? 639983653 821462684 272218546+ 20 Unknown
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(356, 97, 46) logical=(639983652, 0, 3)
Partition 1 has different physical/logical endings:
phys=(357, 116, 40) logical=(821462683, 0, 2)
Partition 1 does not end on cylinder boundary.
/dev/sdc2 ? 443394735 623053497 269488144 6b Unknown
Partition 2 has different physical/logical beginnings (non-Linux?):
phys=(288, 110, 57) logical=(443394734, 0, 1)
Partition 2 has different physical/logical endings:
phys=(269, 101, 57) logical=(623053496, 0, 2)
Partition 2 does not end on cylinder boundary.
/dev/sdc3 ? 179663131 645784101 699181456 53 OnTrack DM6 Aux3
Partition 3 has different physical/logical beginnings (non-Linux?):
phys=(345, 32, 19) logical=(179663130, 0, 2)
Partition 3 has different physical/logical endings:
phys=(324, 77, 19) logical=(645784100, 0, 3)
Partition 3 does not end on cylinder boundary.
/dev/sdc4 * 464875888 464883000 10668+ 49 Unknown
Partition 4 has different physical/logical beginnings (non-Linux?):
phys=(87, 1, 0) logical=(464875887, 0, 3)
Partition 4 has different physical/logical endings:
phys=(335, 78, 2) logical=(464882999, 0, 3)
Partition 4 does not end on cylinder boundary.
Partition table entries are not in disk order
For interest, here is the lsmod output:
Module Size Used by Not tainted
nls_iso8859-1 2780 0 (autoclean)
isofs 22996 0 (autoclean)
usb-ohci 16488 0 (unused)
usbcore 52268 1 [usb-ohci]
ide-scsi 8272 0
tg3 45392 0 (unused)
firmware_class 3164 0 [tg3]
cfi_probe 4112 0 (autoclean)
gen_probe 1552 0 (autoclean) [cfi_probe]
chipreg 697 0 [cfi_probe]
ext3 65388 7 (autoclean)
jbd 34628 7 (autoclean) [ext3]
ide-detect 288 0 (unused)
ide-cd 27040 0
cdrom 26212 0 [ide-cd]
ide-core 91800 0 [ide-scsi ide-detect ide-cd]
rtc 5768 0 (autoclean)
sd_mod 10764 18 (autoclean)
megaraid 23268 9 (autoclean)
aic7xxx 121944 0 (autoclean) (unused)
scsi_mod 86020 4 (autoclean) [ide-scsi sd_mod megaraid aic7xxx]
unix 12720 2 (autoclean)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
