Package: installation-reports INSTALL REPORT
Debian-installer-version: 2004-08-30 http://cdimage.debian.org/pub/cdimage-testing/sarge_d-i/i386/rc1/sarge-i386-netinst.iso uname -a: Linux winter.infriesland.de 2.4.26-1-386 #1 Tue Aug 24 13:31:19 JST 2004 i686 GNU/Linux Date: 2004-09-04 Method: I made the download with my former installation of Debian 3.0 an burnt the image on CD-RW. Than I rebooted and installed on a free partition. The home directory is on an extra partition. The swap partition has about 540 MB. Machine: Asrock board (K7VT2) with LAN onboard; Symbios Logic SCSI controller 53c810; 2 hard disks; 2 SCSI-CDROMs; DVD-Burner GSA 4082 B Processor: AMD Athlon XP 2200+ Memory: 256 KB Root Device: IDE / ST360020A Root Size/partition table: / = 4,200 MB Output of lspci and lspci -n: lspci>> 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333] 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP] 0000:00:09.0 SCSI storage controller: LSI Logic / Symbios Logic 53c810 (rev 12) 0000:00:0c.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01) 0000:00:0d.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01) 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) 0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge 0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT82 3x/A/C PIPC Bus Master IDE (rev 06) 0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74) 0000:01:00.0 VGA compatible controller: nVidia Corporation NV5M64 [RIVA TNT2 Model 64/Model 64 Pro] (rev 15) lspci -n >> 0000:00:00.0 0600: 1106:3099 0000:00:01.0 0604: 1106:b099 0000:00:09.0 0100: 1000:0001 (rev 12) 0000:00:0c.0 0280: 1814:0201 (rev 01) 0000:00:0d.0 0401: 1274:5000 (rev 01) 0000:00:10.0 0c03: 1106:3038 (rev 80) 0000:00:10.1 0c03: 1106:3038 (rev 80) 0000:00:10.2 0c03: 1106:3038 (rev 80) 0000:00:10.3 0c03: 1106:3104 (rev 82) 0000:00:11.0 0601: 1106:3177 0000:00:11.1 0101: 1106:0571 (rev 06) 0000:00:12.0 0200: 1106:3065 (rev 74) 0000:01:00.0 0300: 10de:002d (rev 15) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Before I had Debian 3.0 without graphical login. If I remember correctly, I just had to change the target runlevel. Now the 2nd runlevel brings a grahical login. I think, the installer did not ask me about that. Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] Regards (and many thanks) Sven Mayerhofer -- Sven Mayerhofer Hamburger Str. 3 * D-26382 Wilhelmshaven Telefon +49 (0) 4421 36 75 95 * Mobil +49 (0) 170 30 59 22 0 PGP Public Key: http://www.infriesland.de/mayerhofer/pgp.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
